Inclusions of carbon in ingots of silicon carbide grown by the modified Lely method

The problem of the appearance of carbon inclusions in single-crystal silicon carbide ingots grown by the modified Lely method (the so-called graphitization of the ingot) is analyzed. It is shown that the process of graphitization of the ingot is not related to a deficit of silicon in the growth cell; in contrast, it is excess of silicon at the growth surface that inhibits the ingot growth rate and gives rise to intense corrosion of the graphite fittings.     

The principles of information processing based on the numerical solution of the nonlinear heat-conduction problem. Pt. 1. The three-dimensional discrete mathematical model

A three-dimensional solution of the direct problem of heat conduction when a linear pulsed heat source acts in the plane of contact of two semibounded bodies is presented. The solution is obtained by the method of finite differences. An example of the modeling is considered. __________ Translated from Izmeritel’naya Tekhnika, No. 10, pp. 42–45, October, 2007.     

Mechanical properties of iron processed by severe plastic deformation

In the present study, the mechanical properties of Fe processed via severe plastic deformation (equal-channel angular pressing (ECAP)) at room temperature were investigated for the first time. The grain size of annealed Fe, with an initial grain size of about 200 μm, was reduced drastically during ECAP. After eight passes, the grain size reaches 200 to 400 nm, as documented by means of transmission electron microscopy (TEM). The value of microhardness during pressing increases 3 times over that of the starting material after the first pass and increases slightly during subsequent pressing for higher-purity Fe. Examination of the value of microhardness after eight passes as a function of post-ECAP annealing temperature shows a transition from recovery to recrystallization, an observation that resembles the behavior reported for heavily deformed metals and alloys. The tensile and compression behaviors were examined. In tension, a drop in the engineering stress-engineering strain curve beyond maximum load was observed both in the annealed Fe and the ECAP Fe. This drop is related to the neck deformation. The fracture surface, examined by scanning electron microscopy (SEM), shows vein patterns, which is different from the dimples found on the fracture surface of annealed Fe. In compression, an initial strain-hardening region followed by a no-strain-hardening region was observed in the ECAP Fe. The yield strength in tension of the ECAP Fe was observed to be higher than that in compression. The strengthening mechanisms and softening behavior are discussed.     

A controllable chaotic system based on inductively coupled bistable oscillators

A mathematical model of a new controllable autooscilatory chaotic system based on inductively coupled Chua’s oscillators is described. Numerical simulations show that, using a chaotizing feedback algorithm, chaotic oscillations in this system can be excited in regimes where only regular oscillations are generated otherwise.     

Hybrid LES — Review and assessment

In the late eighties and up to the beginning of nineties computation of turbulent flows is mostly dominated by RANS (Reynolds Averaged Navier-Stokes Simulation) type modelling. During the last few years URANS (Unsteady RANS) and LES (Large Eddy Simulation) type of approaches have been attempted with some success. Yet, there have been many difficulties when LES is applied to practical engineering problems and to high Reynolds number flows as energy dissipating eddies become really small and mesh resolution required for a reasonably resolved LES approaches that of DNS (Direct Numerical Simulation). An alternative solution suggested was to combine RANS and LES, which in general referred to as Hybrid LES. There have been many proposals for combining RANS and LES in different ways. In this article, some of the issues involved in performing hybrid LES reported in the recent literature is briefly reviewed.     

Change in the basic thermodynamic characteristics of polymeric sorbents in interaction with inert gases in a wide range of pressures and temperatures

A model for calculating of the change in the basic thermodynamic characteristics of a sorbent (internal energy and entropy) with the phenomenological-thermodynamics method has been developed. Calculations for the systems polycarbonate-carbon dioxide and polymethylmethacrylate-carbon dioxide have been carried out. __________ Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 80, No. 3, pp. 198–200, May–June, 2007.     

Hydrocarbon impurities in SiF<Subscript>4</Subscript> and SiH<Subscript>4</Subscript> prepared from it

Using gas chromatography and high-resolution Fourier-transform IR spectroscopy, we have determined the concentrations of C₁–C₄ hydrocarbon impurities in isotopically unmodified silicon tetrafluoride before and after fine purification and in ²⁸Si-enriched SiF₄. The concentrations of C₁–C₄ hydrocarbon impurities in silicon tetrafluoride for SiH₄ synthesis have been shown to correlate with those in the synthesized silane.     

Methane conversion in a plasma created by a periodic-pulsed electron beam and non-self-sustained discharge

The process of methane conversion in a mixture modeling the natural gas under the action of a periodic nanosecond pulsed electron beam and an electron-beam-induced non-self-sustained discharge has been numerically simulated and studied in experiment. The possibility of methane conversion under the action of electric pulses without significant heating of the processed gas mixture is demonstrated for the first time. The main conversion products in experiment were hydrogen, ethylene, and acetylene.