Sorption of lead from aqueous solution by chemically modified carbon adsorbents

An indigenously prepared, steam activated and chemically modified carbon from husk and pods of Moringa oleifera (M. oleifera), an agricultural waste, was comparatively examined as an adsorbent for the removal of lead from aqueous solutions. Studies were conducted as a function of contact time, initial metal concentration, dose of adsorbent, agitation speed, particle size and pH. Maximum uptake capacities were found to be, 98.89, 96.58, 91.8, 88.63, 79.43% for cetyltrimethyl ammonium bromide (CTAB), phosphoric, sulfuric, hydrochloric acid treated and untreated carbon adsorbents, respectively. Bangham, pseudo-first- and second-order, intra-particle diffusion equations were implemented to express the sorption mechanism by utilized adsorbents. Adsorption rate of lead ions was found to be considerably faster for chemically modified adsorbents than unmodified. The results of adsorption were fitted to both the Langmuir and Freundlich models. Satisfactory agreement between the metal uptake capacities by the adsorbents at different time intervals was expressed by the correlation coefficient (R(2)). The Langmuir model represented the sorption process better than the Freundlich one, with R(2) values ranging from 0.994 to 0.998.     

Ni(II) biosorption by Cassia fistula (Golden Shower) biomass

Cassia fistula is a fast-growing, medium-sized, deciduous tree which is now widely cultivated worldwide as an ornamental tree for its beautiful showy yellow flowers. Methods are required to reuse fallen leaves, branches, stem bark and pods when they start getting all over lawn. This investigation studies the use of these non-useful parts of C. fistula as naturally occurring biosorbent for the batch removal of Ni(II) in a well stirred system under different experimental conditions. The data showed that the maximum pH (pHmax) for efficient sorption of Ni(II) was 6 at which evaluated biosorbent dosage, biosorbent particle size, initial concentrations of Ni(II) and sorption time were 0.1 g/100 mL, <0.255 mm, up to 200 mg/L and 720 min, respectively. The experimental results were analyzed in terms of Langmuir and Freundlich isotherms. The Langmuir isotherm model fitted well to data of Ni(II) biosorption by C. fistula biomass as compared to the model of Freundlich. The kinetic studies showed that the sorption rates could be described better by a second order expression than by a more commonly applied Lagergren equation. The magnitude of the Gibbs free energy values indicates spontaneous nature of the sorption process. The sorption ability of C. fistula biomass for Ni(II) removal tends to be in the order: leaves相似文献   

Forming-free bipolar resistive switching in nonstoichiometric ceria films

The mechanism of forming-free bipolar resistive switching in a Zr/CeO _x /Pt device was investigated. High-resolution transmission electron microscopy and energy-dispersive spectroscopy analysis indicated the formation of a ZrO _y layer at the Zr/CeO _x interface. X-ray diffraction studies of CeO _x films revealed that they consist of nano-polycrystals embedded in a disordered lattice. The observed resistive switching was suggested to be linked with the formation and rupture of conductive filaments constituted by oxygen vacancies in the CeO _x film and in the nonstoichiometric ZrO _y interfacial layer. X-ray photoelectron spectroscopy study confirmed the presence of oxygen vacancies in both of the said regions. In the low-resistance ON state, the electrical conduction was found to be of ohmic nature, while the high-resistance OFF state was governed by trap-controlled space charge-limited mechanism. The stable resistive switching behavior and long retention times with an acceptable resistance ratio enable the device for its application in future nonvolatile resistive random access memory (RRAM).     

Elastomeric ablative nanocomposites used in hyperthermal environments

Pristine multiwalled carbon nanotubes (MWCNTs) along with the silane coupling agent were incorporated into ethylene propylene diene monomer (EPDM) rubber using dispersion kneader and two roller mixing mill to fabricate ablative nanocomposites used in hyperthermal environment encountered by space vehicle or rocket motor. The 1 wt% addition of MWCNTS in the rubber matrix has remarkably reduced the backface temperature elevation up to 40°C during the ablation testing of the ablatives. The linear and mass ablation resistances have been diminished up to 125% and 74%, respectively, while insulation indexes at 110°C backface temperature of the composite specimens have been elevated up to 51% with increasing the MWCNTS incorporation into the EPDM matrix. Thermal stability and heat absorbance capability of the polymer composites were progressed with increasing the filler to matrix ratio. Thermal conductivity/impedance of the ablatives have been conducted according to the ASTM E1225‐99 and D5470‐03, respectively to execute the effect of MWCNTs concentration on the thermal transport characteristics of the tested specimens. Tensile strength of the composite specimen was augmented up to 42% with increasing nanotubes to polymer ratio. Evenly dispersed MWCNTs in the polymer matrix, polymer pyrolysis, and voids formation in the ablated samples can be scrutinized in the scanning electron microscopy images. POLYM. ENG. SCI., 54:255–263, 2014. © 2013 Society of Plastics Engineers     

In vivo EPR dosimetry to quantify exposures to clinically significant doses of ionising radiation

As a result of terrorism, accident or war, populations potentially can be exposed to doses of ionising radiation that could cause direct clinical effects within days or weeks. There is a critical need to determine the magnitude of the exposure to individuals so that those with significant risk can have appropriate procedures initiated immediately, while those without a significant probability of acute effects can be reassured and removed from the need for further consideration in the medical/emergency system. It is extremely unlikely that adequate dosemeters will be worn by the potential victims, and it also will be unlikely that prompt and accurate dose reconstruction at the level of individuals will be possible. Therefore, there is a critical need for a method to measure the dose from radiation-induced effects that occur within the individual. In vivo EPR measurements of radiation-induced changes in the enamel of teeth is a method, perhaps the only such method, which can differentiate among doses sufficiently to classify individuals into categories for treatment with sufficient accuracy to facilitate decisions on medical treatment. In its current state, the in vivo EPR dosemeter can provide estimates of absorbed dose of +/- 0.5 Gy in the range from 1 to >10 Gy. The lower limit and the precision are expected to improve, with improvements in the resonator and the algorithm for acquiring and calculating the dose. In its current state of development, the method is already sufficient for decision-making action for individuals with regard to acute effects from exposure to ionising radiation for most applications related to terrorism, accidents or nuclear warfare.     

Design Criteria for Horseshoe and Spiral-Based Interconnects for Highly Stretchable Electronic Devices

Stretchable electronics can be used for numerous advanced applications such as soft and wearable actuators, sensors, bio-implantable devices, and surgical tools because of their ability to conform to curvilinear surfaces, including human skin. The efficacy of these devices depends on the development of stretchable geometries such as interconnection-based configurations and the associated mechanics that helps to achieve optimum configurations. This work presents the essential mechanics of silicon (Si) island-interconnection structures, which include horseshoe and spiral interconnections, without reducing the areal efficiency. In particular, this study demonstrates the range of the geometrical parameters where they have a high stretchability and cyclic life. The numerical results predict the areas that are prone to breaking followed by experimental validation. The figure-of-merit for these configurations is achieved by mapping the fracture-free zones for in-plane and out-of-plane stretching with essential implications in stretchable and wearable system design. Furthermore, this work demonstrates the mechanical response for a range of materials (i.e., copper, gold, aluminum, silver, and graphene) that experience the plastic deformations in contrast to conventionally used Si-based devices that represent the extended usage for advanced stretchable electronic devices. The detailed mechanics of these configurations provides comprehensive guidelines to manufacture wearable and stretchable electronic devices.     

Synthesis and EMI shielding studies of polyaniline grafted conducting nanohybrid

Polyaniline (PANI) grafted conducting nanohybrids are successfully synthesized by emulsion graft polymerization. Maximum grafting of 644% is obtained on sepiolite at optimized concentrations and reaction conditions. The Fourier transform infrared (FT-IR) spectra of sepiolite grafted polyaniline (MS-g-PANI) nanohybrid revealed the presence of stretching vibrations of C=C bonds of polyaniline at 1580 and 1490 cm⁻¹ along with the characteristic peaks of sepiolite. Increased thermal stability of the nanohybrid is observed with the increase in polyaniline grafting. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) are used to study the structural changes caused by grafting. A progressive increase in electrical conductivity is observed with the increase in grafting yield. Maximum electrical conductivity of 0.427 Scm⁻¹ is observed in the nanohybrid having 644% grafting. 24.2 dB (>99% attenuation) EMI shielding effectiveness has been exhibited by the developed nanohybrids in X-band frequency range.