Small-diameter (2 mm) laparoscopy in the evaluation of liver disease

We report the case of a pathological mediopatellar plica found in the right knee of a 15-month-old infant girl. Flexion contracture of the knee was found to be 40 degrees. An arthroscopic view showed a large and thick voluminous mediopatellar plica. It was trapped between the patella and the medial femoral condyle and it was in tight contact with the medial facet of the patella at 40 degrees flexion in the knee, blocking further extension. A longitudinal groove was noted on the articular surface of the medial femoral condyle that looked as if it had another trochlea on arthroscopic view. The mediopatellar plica came into contact with the groove at 60 degrees flexion in the knee and it fitted precisely into the groove at further flexion. The pathological plica was resected arthroscopically, which resulted in approximately 10 degrees improvement in extension of the knee. Histological examination found hypertrophy and chronic nonspecific inflammation of the synovium. The patient was helped with range-of-motion exercise and quadriceps-strengthening exercise. At 27 months follow-up, the knee had gained full extension. This article reports that a pathological mediopatellar plica may develop in infants.     

A time‐dependent multiphysics,multiphase modeling framework for carbon nanotube synthesis using chemical vapor deposition

A time‐dependent multiphysics, multiphase model is proposed and fully developed here to describe carbon nanotubes (CNTs) fabrication using chemical vapor deposition (CVD). The fully integrated model accounts for chemical reaction as well as fluid, heat, and mass transport phenomena. The feed components for the CVD process are methane (CH₄), as the primary carbon source, and hydrogen (H₂). Numerous simulations are performed for a wide range of fabrication temperatures (973.15–1273.15 K) as well as different CH₄ (500–1000 sccm) and H₂ (250–750 sccm) flow rates. The effect of temperature, total flow rate, and feed mixture ratio on CNTs growth rate as well as the effect of amorphous carbon formation on the final product are calculated and compared with experimental results. The outcomes from this study provide a fundamental understanding and basis for the design of an efficient CNT fabrication process that is capable of producing a high yield of CNTs, with a minimum amount of amorphous carbon. © 2009 American Institute of Chemical Engineers AIChE J, 2009     

Effect of solar chimney inclination angle on space flow pattern and ventilation rate

The solar chimney is a simple and practical idea that is applied to enhance space natural ventilation. The chimney could be vertical or inclined. The chimney inclination angle is an important parameter that greatly affects space flow pattern and ventilation rate.In the present study, the effect of chimney inclination angle on air change per hour and indoor flow pattern was numerically and analytically investigated. A numerical simulation using Ansys, a FEM-based code, was used to predict flow pattern. Then the results were compared with published experimental measurements. A FORTRAN program was developed to iteratively solve the mathematical model that was obtained through an overall energy balance on the solar chimney.The analytical results showed that an optimum air flow rate value was achieved when the chimney inclination is between 45° and 70° for latitude of 28.4°. The numerically predicted flow pattern inside the space supports this finding. Moreover, in the present study a correlation to predict the air change per hour was developed. The correlation was tested within a solar intensity greater than or equal to 500 W/m², and chimney width from 0.1 m to 0.35 m for different inclination angles with acceptable values.     

Microstructure and Optical Bandgap of Cobalt Selenide Nanofilms

Semiconductors - The purpose of this research is to explore the properties of CoSe nanostructured thin films on glass substrates prepared by a chemical solution deposition method. Special attention...     

Benders Decomposition Algorithms for Two Variants of the Single Allocation Hub Location Problem

Networks and Spatial Economics - The hub location problem (HLP) is a special type of the facility location problem with numerous applications in the airline industry, postal services, and computer...     

Synthesis and characterization of silicone-modified vinyl acetate–acrylic emulsion copolymers

The triethoxyvinylsilane (TEVS) containing vinyl acetate (VAc)/2-ethylhexylacrylate (2-EHA) copolymers were prepared by emulsion copolymerization. The polymerization was performed with methacrylic acid (MAA) and auxiliary agents at 80 °C in the presence of ammonium peroxodisulfate (APS) as the initiator. Alkyl phenol ether sulfate and Arkupal N-300 were used as anionic and nonionic emulsifiers, respectively. The resulting copolymers were characterized by using Fourier transform infrared spectroscopy (FTIR). Thermal properties of the copolymers were studied by using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The morphology of copolymers was also investigated by scanning electron microscopy (SEM) and then the effects of temperature, agitation speed, initiator and silicone concentrations on the properties of the silicone-modified VAc–acrylic emulsion copolymers were discussed. The obtained copolymers have high solid content (53%) and can be used in emulsion paints as a binder. The calculations of monomer conversion versus time histories and monomer conversion indicate that by increasing the TEVS concentration, the polymerization rate and the number of polymer particles decrease, respectively.     

On the tube hydroforming process using rectangular,trapezoidal, and trapezoid-sectional dies: modeling and experiments

It is generally known that the contact between tube and die, in the case of tube hydroforming process, leads to the appearance of friction effects. In this context, there are many different models for representing friction and many different tests to evaluate it. In the present paper, the pin-on-disk test has been used and the theoretical model of Orban-2007 has been chosen and developed to evaluate friction coefficient. The main goal is to prove the capacity of theoretical model to present the friction conditions in comparison with the pin-on-disk test. From the Orban model, values of 0.05 and 0.25 of friction coefficient have been found under lubricated and dry tests, respectively. On the other hand, by the classical pin-on-disk test, other values were experimentally obtained as friction coefficient at the copper/steel interface. In the case of pure expansion hydroforming, based on an internal pressure loading only, a “corner filling” test has been run for tube hydroforming. Both dry and lubricated contacts have been considered. Various configurations and shapes have been studied such as the rectangular, trapezoidal, and trapezoid-sectional dies. Finite element simulations with 3D shell and 3D solid models have been performed with different values of friction coefficients. From the main results, it was found that the critical thinning occurs in the transition zone for the square and rectangular section die and in the sharp angle for the trapezoidal and trapezoid-sectional die. The comparison between numerical data and experimental results shows a good agreement. Moreover, the thickness distribution along the cross section is relatively consistent with those measured for the 3D shell model; however, the 3D solid models do not provide a realistic representation of the thickness distribution in the shaped tube. Finally, the results obtained from the theoretical model were more efficient than the results obtained from the pin-on-disk test.     

Enhanced Heat Transfer Properties of Magnetite Nanofluids due to Neel and Brownian Relaxation Mechanisms

Fe₃O₄ nanoparticles were prepared through solvo-thermal method for further heat transfer applications. TEM, XRD, TGA, and VSM were applied to characterize the obtained nanoparticles. XRD pattern confirmed that nanoparticles were composed of 6-nm crystallites; however, TEM images showed the formation of ca. 75-nm highly dispersed magnetite clusters, made up of about 6-nm nanoparticles. Since, VSM analysis confirmed the superparamagnetic characteristics of Fe₃O₄ nanoclusters, heat transfer properties of the resulting nanofluids were studied to investigate the influence of the magnetic field on the behavior of the magnetite-based nanofluids. The findings indicated that the convective heat transfer coefficient increased up to 48% and 15%, respectively, for nanofluids containing 0.005 wt% magnetite particles dispersed in water and EG, when the frequency of the alternating magnetic field was changed from 50 Hz to 1 MHz. According to the results, compared to the water-based nanofluids, at higher field amplitudes, the h enhancements of EG-based ones were more pronounced, for instance, at H₀ = 36,000 A/m, the h measurements are augmented by about 74% and 109%, respectively, compared to the water and EG as the base fluids. These findings could be explained by the use of specific lost powers of the nanofluids in the exposure of an external alternating magnetic field.     

Nested and interleaved direct sequence spread spectrum to enhance CDMA security and bit error rate performance

Two new methods, the nested direct sequence spread spectrum and interleaved direct sequence spread spectrum, are introduced in view of the previously investigated spread spectrum methods. In the nested direct sequence method, the security is maintained, and the cross‐correlation between different codes resulting in multi‐user interference that corresponds to BER performance is improved, while in the interleaved direct sequence spread spectrum, the security is improved and BER performance is maintained. Both methods are analysed by mathematical relations as well as computer simulations and are compared with the existing methods. Copyright © 2016 John Wiley & Sons, Ltd.     

Inhibition of the mesoamygdala dopaminergic pathway impairs the retrieval of conditioned fear associations.

Previous findings have demonstrated that systemic dopaminergic manipulations impair the retrieval of Pavlovian conditioned fear. A second-order fear-conditioning paradigm was used to test whether the dopaminergic projection from the ventral tegmental area (VTA) to the lateral and basal amygdala (LBA) can affect conditioned fear. Phase 1 entailed conditioned stimulus-unconditioned stimulus (CS1-US) pairings. In Phase 2, drugs were infused in either the LBA or VTA prior to pairings of CS2 (a second cue) with CS1. In Phase 3, freezing behavior elicited by CS2 was tested without drugs. Infusions of the D2 agonist quinpirole into the VTA or of the D1 antagonist SCH 23390 into the LBA caused a decrease in freezing to CS2. Both manipulations decrease D1 receptor activation in the LBA. Infusions of the D1 agonist SKF 38393 into the LBA had no effect. This pattern of results is consistent with the hypothesis that the VTA-LBA dopaminergic projection modulates the retrieval of an association between a CS and footshock US. (PsycINFO Database Record (c) 2010 APA, all rights reserved)