Raman spectra,photoluminescence and ferromagnetism of pure,Co and Fe doped SnO2 nanoparticles

The pure and transition metal (Co and Fe = 3 and 5 mol%) doped SnO₂ nanoparticles have been synthesized by a chemical route using polyvinyl alcohol as surfactant. These nanoparticles were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Raman, Fourier transform infrared (FTIR) spectroscopy, photoluminescence (PL) and magnetic measurements. The XRD patterns show that all the samples have tetragonal rutile structure without any extra phase and the value of average particle size using FWHM lies within 12–29 nm is also confirmed by TEM. FTIR spectrum has been used to confirm the formation of SnO bond. Raman spectroscopy shows the intensity loss of classical cassiterite SnO₂ vibration lines which is an indication of significant structural modifications. From PL, an intense blue luminescence centered at a wavelength ～530 nm is observed in the prepared SnO₂ nanoparticles, which is different from the yellow-red light emission observed in SnO₂ nanostructures prepared by other methods. The strong blue luminescence from the as-grown SnO₂ nanoparticles is attributed to oxygen-related defects that have been introduced during the growth process. These Co and Fe-doped SnO₂ nanoparticles exhibit room temperature ferromagnetism and the value of their magnetic moment and phase transition temperature are sensitive to their size and stoichiometric ratio.     

Excellent humidity sensing properties of cadmium titanate nanofibers

We report humidity sensing characteristics of CdTiO₃ nanofibers prepared by electrospinning. The nanofibers were porous having an average diameter and length of ～50–200 nm and ～100 μm, respectively. The nanofiber humidity sensor was fabricated by defining aluminum electrodes using photolithography on top of the nanofibers deposited on glass substrate. The performance of the CdTiO₃ nanofiber humidity sensor was evaluated by AC electrical characterization from 40% to 90% relative humidity at 25 °C. The frequency of the AC signal was varied from 10^?1 to 10⁶ Hz. Fast response time and recovery time of 4 s and 6 s were observed, respectively. The sensor was highly sensitive and exhibited a reversible response with small hysteresis of less than 7%. Long term stability of the sensor was confirmed during 30 day test. The excellent sensing characteristics prove that the CdTiO₃ nanofibers are potential candidate for use in high performance humidity sensors.     

Pool boiling of R-123/MO and R-134a/POE lubricant mixtures on pored surfaces

In a flooded refrigerant evaporator, where enhanced tubes are frequently used, lubrication oil inevitably circulates with the refrigerant. However, the literature shows that systematic studies on this subject are lacking. In this study, the effects of oil on the pool boiling of pored surfaces having a range of pore diameter (0.1 to 0.3 mm) and pitch (0.75 to 3.0 mm) were investigated using R-134a/polyester oil (POE) and R-123/mineral oil (MO) mixtures. The saturation temperature was 26.7 °C, and the oil concentration was varied up to 10 %. The results showed that the oil reduced the heat transfer coefficient. This was true for all the pored surface as well as the smooth surface. Overall, the samples having a ‘small open area’ yielded a significant degradation at a low heat flux, whereas the samples having a ‘large open area’ yielded a noticeable degradation at a high heat flux. Meanwhile, the heat transfer degradation was larger for R-134a/POE than R-123/MO, and the reason was attributed to the oil effect on the surface tension, which was stronger for R-134a/POE. The flow visualization results showed that, with the increase of oil concentration, the bubble departure diameter decreased. Similarly, the bubble generation frequency and nucleation site density decreased. These changes of the bubble dynamic parameters certainly were responsible for the heat transfer degradation. A model was developed extending that of Pastuszko et al. [27] to predict the heat transfer coefficients as well as bubble dynamic parameters. The model predicted 92 % of the heat transfer coefficients within ± 40 %.

     

Numerical Simulations of the High-Velocity Impact of a Single Polymer Particle During Cold-Spray Deposition

In this paper, deposition of polymer powders was studied numerically for the cold-spray deposition technique. In cold spray, a solid particle is impacted on a substrate at high velocity. The deformation and heating upon impact have been shown to be enough to result in particle deposition and adhesion even without melting the particle. Here, a systematic analysis of a single high-density polyethylene particle impacting a semi-infinite high-density polyethylene substrate was carried out for initial velocities ranging between 150 and 250 m/s using the finite element analysis software ABAQUS Explicit. A series of numerical simulations were performed to study the effect of a number of key parameters on the particle impact dynamics. These key parameters include particle impact velocity, particle temperature, particle diameter, composition of the polyethylene particle, surface composition and the thickness of a polyethylene film on a hard metal substrate. The effect of these parameter variations on the particle impact dynamics were quantified by tracking the particle temperature, deformation, plastic strain and rebound kinetic energy. The trends observed through variation of these parameters provided physical insight into the experimentally observed window of deposition where cold-sprayed particles are mostly likely to adhere to a substrate.     

Influence of end-group modification on interaction of amphiphilic poly(oxyethylene)-<Emphasis Type="Italic">b</Emphasis>-poly(oxybutylene) block copolymers with ionic surfactants

Amphiphilic poly(oxyethylene)-b-poly(oxybutylene) block copolymers having hydrophilic block end-capped with neutral dimethylamino (DE₇₉B₃₄) and cationic trimethyl ammonium (TE₇₉B₃₄) groups, respectively were investigated for their interactions with ionic surfactants, sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB) using tensiometry, conductometry and dynamic light scattering. The self-assembly of DE₇₉B₃₄ and TE₇₉B₃₄ occur at 0.7 g/dm³ and 0.8 g/dm³, respectively. TE₇₉B₃₄ binds favorably with oppositely charged SDS, causing a substantial change in surface tension compared to other surfactant-polymer systems. In mixed polymer-surfactant systems, the micellization was promoted in the presence of SDS, but it was suppressed with CTAB. Such behavior is expected for cationic block copolymers, since they can engage into ion-pair formation with anionic SDS. For neutral polymers, the behavior is reflective of surfactants’ head group hydrophobicity. The head groups of CTAB are more hydrophobic and their existence in the proximity of hydrophobic segments of polymers induces shape transition to non-spherical morphologies. Gibb’s free energy of adsorption at air – water interface is negative for SDS, CTAB and surfactant-block copolymer systems, indicating that the process is highly spontaneous. The increase in entropy of TE₇₉B₃₄ during micelle formation with temperature is due to disturbance of hydrophobic structure of water molecules, thus hydrophobic parts are removed from bulk solution to the interface and also in the interior of micelle the freedom of hydrophobic part is increased. The dynamic laser light scattering results revealed that due to presence of block copolymers pre-micellar aggregates were favored.     

Speciation of As, Cr, Se and Hg under coal fired power station conditions

Coal combustion from power stations is an important anthropogenic contributor of toxic trace elements to the environment. Some trace elements may be emitted in range of valencies, often with varying toxicity and bioavailability. Hence, determination of trace element speciation in coals and their combustion products is important for conducting comprehensive risk assessments of the emissions from coal-fired power stations. This study focuses on speciation of selected trace elements, As, Cr, and Se, in coal combustion products and Hg in flue gas, which were sampled at one Australian power station. Different analytical methods such as secondary ion mass spectrometry (SIMS), ion chromatography-inductively coupled plasma mass spectrometry (IC-ICPMS) and X-ray absorption near edge structure spectrometry (XANES) were used to determine trace element speciation in coal and ash samples. Results showed that As, Cr and Se are all present in a range of valency states in coal. Concentrations of As and Se in the bottom ash as well as the more toxic hexavalent chromium were less than the detection limits. The more toxic As³⁺ form in fly ash was at 10% of the total arsenic, while selenium was mainly found in Se⁴⁺ form. Hexavalent chromium (Cr⁶⁺) in fly ash was 2.7% of the total fly ash chromium. Mercury speciation in flue gas was determined using the Ontario Hydro sampling train and analysis technique. Approximately 58% of the total mercury in flue gas was released in the elemental form (Hg⁰), which, among all mercury species, has the highest residence time in the environment due to lower solubility. This work summarises the performance of the selected analytical techniques for speciation of trace elements.     

Fatty acid and sterol specificity of cholesterol esterifying enzyme in developing rat brain

The properties and fatty acid and sterol specificity of cholesterol-esterifying enzyme (EC 3.1.1.13) in rat brain were studied. The enzyme utilized free fatty acid for esterification, and activity was maximal at pH 5.6. Exogenous ATP and CoA did not stimulate the incorporation of free fatty acids into sterol esters. Substrates dispersed in Tween 20 or Triton X-100 were just as effective as the substrates dissolved in acetone solution, while dispersion in propylene glycol or sodium taurocholate was not as effective. Snake venom phospholipase A₂ (EC 3.1.1.4) increased the esterification of cholesterol in the absence of added fatty acid. The fatty acid specificity data indicated that oleic and palmitic acids were the preferred fatty acids. Little or no esterification occurred in the presence of long chain fatty acids (C₂₀–C₂₄). Esterification of cholesterol with palmitate or stearate was not affected by the presence of oleic acid in the mixture. Thus, the nonrequirement of the brain-esterifying enzyme for a bile acid or for an amphiphile such as an unsaturated fatty acid suggests that micellar solubilization of the substrate is not essential for activity. Although the brain enzyme catalyzed the esterification of desmosterol, cholesterol was the preferred substrate. Neither lanosterol (C₂₉ sterols) nor Δ7-dehydrocholesterol was esterified to any significant extent. The presence of low concentrations of desmosterol increased cholesterol esterification slightly, while there was a concentration-dependent inhibition of demosterol esterification by cholesterol. These data on fatty acid and sterol specificity of the esterifying enzyme correlate well with the composition of sterol esters present in developing rat brain.     

IT infrastructure in emerging markets: arguing for an end-to-end perspective

To help sustain large-scale pervasive computing in emerging markets, researchers must address unique challenges in the delivery fabric and enterprise backbone. Such challenges present opportunities for high impact innovation. Although most research organizations have focused on developing consumer-facing solutions, we posit that future research must take an end-to-end perspective. That is, researchers must not only consider the front end (such as consumer devices) but also the medium to reach the consumer (for example, the delivery fabric) and the back end (for example, the enterprise backbone) to create an economically sustainable, scalable solution. Although our end-to-end perspective generalizes to all emerging markets, in this article, we mainly discuss the Indian market from which we based our observations.     

Biosynthesis of zinc oxide nanoparticles using anjbar (root of Persicaria bistorta) extract and their cytotoxic effects on human breast cancer cell line (MCF‐7)

Biosynthesis of nanoparticles (NPs) using biomass is now one of the best methods for synthesising NPs due to their nontoxic and biocompatibility. Plants are the best choice among all biomass to synthesise large‐scale NPs. The objectives of this study were to synthesise zinc oxide nanoparticles (ZnO‐NPs) using Anjbar (root of Persicaria bistorta) [An/ZnO‐NPs] and investigate the cytotoxic and anti‐oxidant effects. For this purpose, the An/ZnO‐NPs were synthesised by using Bistort extract and characterised using UV–Visible spectroscopy, transmission electron microscope, field emission scanning electron microscope, x‐ray diffraction and Fourier‐transform infrared spectroscopy. The cytotoxic effects of the An/ZnO‐NPs on MCF‐7 cells were followed by 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide assays at 24, 48, and 72 h. Nuclear morphology changed and apoptosis in cells was investigated using acridine orange/propodium iodide (AO/PI) staining and flow cytometry analysis. The pure biosynthesised ZnO‐NPs were spherical in shape and particles sizes ranged from 1 to 50 nm. Treated MCF‐7 cells with different concentrations of ZnO‐NPs inhibited cell viability in a time‐ and dose‐dependent manner with IC50 about 32 μg/ml after 48 h of incubation. In flow cytometry analysis the sub‐G1 population, which indicated apoptotic cells, increased from 12.6% at 0 μg/ml (control) to 92.8% at 60 μg/ml, 48 h after exposure. AO/PI staining showed that the treated cells displayed morphologic evidence of apoptosis, compared to untreated groups. Inspec keywords: cancer, cellular biophysics, toxicology, particle size, nanofabrication, X‐ray diffraction, nanomedicine, nanoparticles, ultraviolet spectra, scanning electron microscopy, visible spectra, transmission electron microscopy, patient treatment, field emission electron microscopy, Fourier transform infrared spectra, drug delivery systemsOther keywords: anjbar, cytotoxic effects, human breast cancer cell line, biomass, transmission electron microscope, field emission scanning electron microscope, Fourier‐transform infrared spectroscopy, flow cytometry analysis, ZnO‐NPs inhibited cell viability, antioxidant effects, MCF‐7 cells, biosynthesised ZnO‐NP, biosynthesised ZnO‐NP, acridine orange‐propodium iodide staining, An‐ZnO‐NP, Persicaria bistorta, zinc oxide nanoparticle biosynthesis, 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide     

Assessing ICT's Environmental Impact

Accurately quantifying information and communications technology's footprint is a critical first step toward reducing its environmental burden.