高硅铸铝合金镀前浸锌液

针对高硅铸铝件在组成，组织与性能上的特点，研究了8种高硅铝合金镀前浸锌液。用扫描电镜（SEM）观察了8种不同的浸锌液配方浸锌的试片的表面浸锌膜的微观形貌，测定了浸锌后镀镍层与试片的结合力，优选了能获得良好结合力的最佳浸锌液配方。并研究了随浸锌时间的增加，锌晶核的析出与成长的过程，结果表明，当氢氧化钠140g/L，氧化锌14～20g/L、氯化镍1.5g/L时，试片镀镍后结合力良好。发现浸锌液能够溶解铝合金部分组织，并在铝表面造成孔洞，这种孔洞对镀层起着锚链作用，铝合金表面孔洞的均匀分散以及细小锌晶粒的高度弥散是得到良好结合力的前提。     

原煤流化床法制脱酚活性炭

以煤为原料，采用流化床一步法制取活性炭，考查了煤种、操作条件和矿物质对煤制活性炭脱酚性能的影响。同时综述了这方面的新成果，以期对该法制活性炭的脱酚性能得到全面了解。     

甲醇装置高效分醇技术及双"零"节能工艺

针对甲醇分离系统存在的普遍性问题 ,提出了“少醇无水”工艺技术并进行了工业实际应用。在“少醇无水”工艺的基础上 ,又提出双“零”工艺的构思。分别对该两种工艺进行了经济效益分析。结果表明 :“少醇无水”工艺可使入塔醇含量由0 .987%降至 0 .5 62 % ,装置能力提高 6.0 %～ 11.12 % ;双“零”工艺可使 10万t/a甲醇装置生产能力提高 2 2 .0 0 %。     

影响单丝牌号5000S产品质量的因素分析

单丝牌号5000S是大庆HDPE装置的主要产品,适用于加工渔网丝、编织袋等产品。作者们讨论了产品的物性参数特点,分析了以往产品质量存在的主要问题。从工艺技术方面对于如何提高5000S产品的优级品率,提高产品的加工性能和使用性能进行了讨论。     

Methanation of carbon dioxide over Ru/Titania at room temperature: explorations for a photoassisted catalytic reaction

The methanation of CO₂ has been investigated over a special Ru/TiO₂ catalyst suggested by Thampi, Kiwi and Graetzel [4]. This paper deals with the analysis of the material and the investigation of the reported photoenhancement of the activity. The catalyst is characterised by in situ UV-VIS spectroscopy and by XPS. Conversion experiments at atmospheric pressure were carried out with and without UV light irradiation. The irradiation increases the conversion significantly. From various experiments it can be shown, however, that this effect is due to a thermal effect and does not involve an intrinsic photochemical step. Localised Ti³⁺ states sensitise the support to convert visible light into heat resulting in the observed increase in conversion.     

库水升降速率对老蛇窝滑坡稳定性影响分析

通过监测资料分析和滑坡稳定性数值计算,探讨了三峡库水位在不同升降速率下对老蛇窝滑坡稳定性的影响规律。研究结果表明,理论上库水位上升有利于老蛇窝滑坡的稳定,但实际运行中库水位上升是不利于滑坡稳定的,因为库水浸泡会使滑坡前缘塌岸;老蛇窝滑坡为动水压力型滑坡,最主要诱发因素为库水位的下(骤)降;老蛇窝滑坡稳定性的临界库水位调度速率为0.9 m/d,即当库水位下降速率大于0.9 m/d时,滑坡K值小于1。     

Synthesis of carbon nanocapsules containing Fe, Ni or Co by arc discharge in aqueous solution

A simple, inexpensive and one-step synthesis method of metal-containing carbon nanocapsules using an arc discharge in aqueous solution is reported. It was found that Ni, Co and Fe nanoparticles could be in situ encapsulated in carbon shells when the arc was performed respectively in aqueous solutions of NiSO₄, CoSO₄ and FeSO₄. Transmission electron microscopy, energy dispersive X-ray spectroscopy and electron diffraction patterns of selected areas were used to determine the crystalline phase of the metal cores. To explain the formation mechanism of metal-containing carbon nanocapsules, a model of discharge in solution is proposed. This result presents a simply controllable way to synthesize metal-containing carbon nanocapsules.     

A novel preparation method for NiCo2O4 electrodes stacked with hexagonal nanosheets for water electrolysis

In this paper, we describe the preparation of a porous nanosheet-stacked NiCo₂O₄ composite electrode using a novel electrophoretic deposition (EPD) calcination method. The effects of the deposition time and voltage, and of the calcination temperature have been investigated. The microstructure of the deposited films in the electrodes before and after calcination has also been investigated. The electrocatalytic properties of the electrodes have been investigated using cyclic voltammetry and polarization curves. The electrode films produced using this new technique have a porous structure composed of stacked hexagonal NiCo₂O₄ nanosheets. The resulting electrodes exhibit good electrocatalytic properties for water electrolysis.     

尼龙6生产中注带处单体烟的回收

分析比较了尼龙 6生产中注带处单体烟的几种回收方法。利用萃取水与注带的单体烟在吸收塔内逆向传质吸收而将单体予以截留的工艺 ,对单体的吸收效果最好。单体的实际回收率可达 98%以上。讨论了影响吸收效率的主要因素及在吸收塔顶加装除沫器的设计     

巴豆酸乙烯酯的提取及聚合应用

巴豆酸乙烯酯存在于醋酸乙烯酯生产的工业废液中,在一定条件下聚合会形成环状结构。用于改性以聚醋酸乙烯酯为基础的乳胶漆无须引发剂和加热,只是简单混和即可使耐洗刷次数增加几倍,还可与其它乙烯基酯、氯乙烯、苯乙烯、马来酸酐等多种单体交联共聚。