Numerical study of evaporation by mixed convection of a binary liquid film

This paper deals with a numerical analysis of the evaporation of binary liquid film. The film is falling down on one plate of a vertical channel under mixed convection channel. The first plate of a vertical channel is externally submitted to a uniform heated flux q₁ while the second one (y = d) is dry and isothermal. The liquid mixture consists of water (the more volatile component) and ethylene glycol while the gas mixture has three components: dry air, water vapour and ethylene-glycol vapour. The results concern the effects of the inlet parameters in the gas and in the liquid film on the interfacial pressure, temperature and concentration profiles. The evolutions of the heat fluxes and of the water and mixture evaporation rates have been analysed. Results obtained show, in particular, that it is possible to increase the accumulated evaporation rate of water and of the liquid mixture when the inlet liquid concentration of ethylene glycol (the less volatile component) is less than 40%. This result has been explained by the fact that an increase of the inlet liquid concentration of ethylene glycol has two antagonistic effects on the accumulated evaporation rates of water and of liquid mixture.     

Thermal energy and economic analysis of a PCM-enhanced household envelope considering different climate zones in Morocco

This study investigates the thermal energy potentials and economic feasibility of an air-conditioned family household-integrated phase change material (PCM) considering different climate zones in Morocco. A simulation-based optimisation was carried out in order to define the optimal design of a PCM-enhanced household envelope for thermal energy effectiveness and cost-effectiveness of predefined candidate solutions. The optimisation methodology is based on coupling Energyplus^® as a dynamic simulation tool and GenOpt^® as an optimisation tool. Considering the obtained optimum design strategies, a thermal energy and economic analysis are carried out to investigate PCMs’ integration feasibility in the Moroccan constructions. The results show that the PCM-integrated household envelope allows minimising the cooling/heating thermal energy demand vs. a reference household without PCM. While for the cost-effectiveness optimisation, it has been deduced that the economic feasibility is stilling insufficient under the actual PCM market conditions. The optimal design parameters results are also analysed.     

Characterization of artisanally and semiautomatically extracted argan oils from Morocco

The present study was conducted to know the possible influence of the seed treatment, method of extraction and geographical origin on the quality and chemical composition of argan oil. Artisanally and semiautomatically extracted argan oils, from roasted and unroasted seeds, from interior and coast areas, were studied. The quality parameters analyzed were acid value, peroxide value, K₂₃₂ and K₂₇₀, triacylglycerols and fatty acid composition, polar compounds, total phenols, tocopherol content and oil stability index (OSI). Seed treatment and extraction method showed a higher influence on quality parameters than geographical area; the quality parameters of the different oils were discussed. The total phenolic content in all analyzed samples was lower than 10 ppm. γ‐Tocopherol was the major tocopherol (84.4–86.4%) with a high contribution to the total tocopherol content (383–485 ppm). The OSI of the argan oil samples were well correlated (R = 0.97) with the tocopherol contents. The argan oil samples obtained from roasted seeds presented higher stability (26–38 h) than the oils from unroasted seeds (16–32 h).     

Analysis of Multi-Server Scheduling Paradigm for Service Guarantees during Network Mobility

Multi-server scheduling of traffic flows over heterogeneous wireless channels affix fresh concerns of inter-packet delay variations and associated problems of out-of-sequence reception, buffer management complexity, packet drops and re-ordering overhead. In this paper, we have presented an exclusive multi-server scheduling algorithm that is specifically tuned for mobile routers equipped with multiple wireless interfaces and has attained multiple care-of-address registrations with its home agent (HA). The proposed adaptive, Self-clocked, Multi-server (ASM) scheduling algorithm is based on predetermined transmission deadlines for each arrived packet at the mobile router. The mobile flows receive desired service levels in accordance with their negotiated service rates and are only constraint by the cumulative capacity of all active links. The major challenge lies in the handling of asymmetric channels to stitch into a unified virtual channel of higher capacity with reliable service guarantees during mobility. The sorted list of transmission schedules is used to assign physical channels in increasing order of their availability. This approach specifically encapsulates the physical layer disconnections during the handovers and ensures continuous service to ongoing flows. The proposed scheduling scheme is supplemented by an analytical model and simulations to verify its efficacy. The simulation results demonstrate higher degree of reliability and scalability of service provisioning to flows during mobility.     

Inhibition of humic substances mediated photooxygenation of furfuryl alcohol by 2,4,6-trimethylphenol. Evidence for reactivity of the phenol with humic triplet excited states

To probe the reactivity of 2,4,6-trimethylphenol with humic triplet excited states, we investigated its influence on the humic substances-mediated photooxygenation offurfuryl alcohol. Elliott soil humic and fulvic acids were employed for these experiments. When added in the concentration range of 10(-4) - 10(-3) M, 2,4,6-trimethylphenol inhibited furfuryl alcohol photooxygenation to an extent depending on its concentration. The inhibiting effect decreased as the oxygen concentration was increased. By postulating that 2,4,6-trimethylphenol competes with oxygen for reaction with humic triplet excited states and with furfuryl alcohol for reaction with singlet oxygen, we obtained kinetic laws describing the consumption profiles of furfuryl alcohol and 2,4,6-trimethylphenol. Experimental rates of 2,4,6-trimethylphenol and furfuryl alcohol loss could be satisfactorily fitted with 1.09-1.16 for the ratio k2/k3, where k2 and k3 are the reaction rate constants of humic triplet excited states with oxygen and 2,4,6-trimethylphenol, respectively. These types of experiments could be extended to a variety of substrates to measure their reaction rate constants with humic triplet excited states.     

Direct-writing of PbS nanoparticles inside transparent porous silica monoliths using pulsed femtosecond laser irradiation

Pulsed femtosecond laser irradiation at low repetition rate, without any annealing, has been used to localize the growth of PbS nanoparticles, for the first time, inside a transparent porous silica matrix prepared by a sol-gel route. Before the irradiation, the porous silica host has been soaked within a solution containing PbS precursors. The effect of the incident laser power on the particle size was studied. X-ray diffraction was used to identify the PbS crystallites inside the irradiated areas and to estimate the average particle size. The localized laser irradiation led to PbS crystallite size ranging between 4 and 8 nm, depending on the incident femtosecond laser power. The optical properties of the obtained PbS-silica nanocomposites have been investigated using absorption and photoluminescence spectroscopies. Finally, the stability of PbS nanoparticles embedded inside the host matrices has been followed as a function of time, and it has been shown that this stability depends on the nanoparticle mean size.     

Deposition and characterization of cold sprayed nanocrystalline NiTi

Binary 50Ni-50Ti mixture was prepared by mechanical alloying from elemental powders. After 48 h of milling, the nanocrystalline B2-NiTi powder was produced. Then, this as-milled powder was deposited by cold spraying in order to produce a target which can be used to create thin films by magnetron sputtering technique. The objective is to improve the electrical characterizations of the NiTi/SiO₂/Si M.O.S structures. The morphology evolution of the powder particles, the phase identification and the alloying evolution process as function of milling time were studied using scanning electron microscopy, X-ray diffraction and transmission electron microscopy. In addition, the target was also characterized using X-ray diffraction, Scanning electron microscopy, and microhardness measurements. The milling of powders leads to the formation of disordered nanocrystalline B2-NiTi with a crystallite size of about 12 nm and a microstrain of level 2.10%, after 48 h of milling. The microstructure, the composition and grain size of the milled powders for 24 h and 48 h characterized by TEM are heterogeneous. The as-deposited intermetallic NiTi can be retained in the coating with a lattice parameter of 0.3 nm, crystallite size of 14 nm, microstrain and high microhardness of 2% and 694 Hv_0.25, respectively.     

Robust H_{\infty } filtering for uncertain two-dimensional continuous systems with time-varying delays

This paper deals with the problem of delay-dependent robust $H_{\infty }$ H ∞ filtering for uncertain two-dimensional (2-D) continuous systems described by Roesser state space model with time-varying delays, with the uncertain parameters assumed to be of polytopic type. A sufficient condition for $H_{\infty }$ H ∞ noise attenuation is derived in terms of linear matrix inequalities, so a robust $H_{\infty }$ H ∞ filter can be obtained by solving a convex optimization problem. Finally, some examples are provided to illustrate the effectiveness of the proposed methodology.     

A novel analytical solution of mixed convection about an inclined flat plate embedded in a porous medium using the DTM-Padé

In this study, the problem of mixed convection about an inclined flat plate embedded in a porous medium is performed. The similarity transformations are applied to reduce governing partial differential equations (PDEs) to a set of nonlinear coupled ordinary differential equations (ODEs) in dimensionless form. An efficient mathematical technique, called the differential transform method (DTM), is used to solve the nonlinear differential equations governing the problem in the form of series with easily computable terms. Then, Padé approximant is applied to the solutions to increase the convergence of given series. It has been attempted to show the reliability and performance of the DTM in comparison with the numerical method (fourth-order Runge–Kutta) in solving this problem. The obtained solutions, in comparison with the numerical solutions admit a remarkable accuracy.     

Analysis of equal-gain diversity with partially coherent fadingsignals

An analytical technique based on Gram-Charlier series expansion is presented for the computation of the error probability of equal-gain combiner (EGC) with partially coherent fading signals. Imperfect carrier recovery is attributed to the random noise present in the carrier recovery loops. The resulting noisy phase references are assumed to satisfy Tikhonov distribution. The fades on the diversity branches are assumed to be slowly varying and statistically independent with Rayleigh-distributed envelopes. The error-rate performance of coherent and differentially coherent phase-shift keying (PSK) systems are compared and the phase precision requirement for a reliable coherent detection is computed. Detection loss caused by carrier phase errors is computed for several signal-to-noise ratio (SNR) reliability and bit error probability levels. It is demonstrated that the effect of carrier phase errors on the mean SNR is negligible compared to their effect on deep fades or small bit error probabilities. It is also shown that the carrier phase precision requirement can be reduced through signal combination