Tribological properties of polymer composites with diamond-like carbon flakes

Composites of epoxy resin with diamond-like carbon (DLC) flakes were fabricated. The DLC flakes were prepared from a DLC film deposited by chemical vapor deposition on an aluminum substrate. The tribological properties of composites were evaluated in air and water environments using a reciprocating friction tester and an AISI 440C mating ball. The friction coefficient of the epoxy composite decreased from 0.90 to 0.69 in air and from 0.71 to 0.29 in water with the addition of DLC flakes. The specific wear rate of the composite also decreased from 5 × 10^? 5 to 7 × 10^? 6 mm³/N m in air and from 4 × 10^? 5 to 4 × 10^? 6 mm³/N m in water. In contrast, the wear of the mating ball increased. Furthermore, the tribological properties of DLC flakes as an additive in water were evaluated. The suspension of powdered DLC in water reduced the friction coefficient of epoxy resin against the AISI 440C mating ball. Furthermore, the wear of the resin was negligibly small, although severe abrasive wear on the mating ball was observed.     

Novel graphite/TiO2 electrochemical cells as a safe electric energy storage system

A graphite/TiO₂ full cell has been developed as a new safety energy storage system using a highly safety process. The crystal structures of the anatase TiO₂ electrode have been investigated with respect to the performance of the electrodes. Due to the large anion intercalation into the graphite positive electrode, the possible charging potential can be raised to around 5.3 V against the Li/Li⁺ electrode, which is a higher charging voltage than lithium-ion batteries (maximum voltage is around 4.3 V vs. Li/Li⁺). In situ XRD measurements have been carried out on both the cathode and anode electrodes of the graphite/TiO₂ cell during the charge process to elucidate the intercalation mechanism.     

Lapped friction stir welding between ductile cast irons and stainless steels

This study investigated the influence of preheating temperature and welding speed on the microstructure of dissimilar lapped friction stir welding (FSW) of ductile cast iron FCD450 and 304 stainless steel. The stainless steel was placed on FCD450, and then FSW was carried out at a tool rotational speed of 200, 400, and 600 rpm and welding speed between 1 and 10 mm/s. Preheating was conducted at 573 and 773 K. Martensitic structure was formed in HAZ of FCD450 without the preheating, while the preheating resulted in the formation of a pearlite structure. Even when the preheating was employed, however, stir zone (SZ) of FCD450 had the chill structure at a lower welding speed, because the SZ temperature exceeded the eutectic temperature. Formation of the chill structure in the SZ could be prevented at a higher welding speed. This study showed that FSW would be available as a dissimilar welding method between ductile cast iron and stainless steel.     

Fundamental research of laser micro welding for practical use of titanium eyeglass frames

Micro welding of titanium eyeglass frames requires sound strength, good exterior appearance and stable production, which suit micro laser welding. The objective of this work is to fundamentally investigate butt welding conditions with a pulsed yttrium aluminium garnet laser beam for exterior appearance and joint strength. Eleven factors of welding conditions which influence joint strength were evaluated from the viewpoint of quality engineering. It was found that two factors of defocused distance and processing of welding surface of the welding parts led to fluctuation of the joint strength. Therefore, sub-millimetre scale control of the laser irradiated point along the optical axis and the removal of impurities lead to brittle metallic compounds on the surface and produce sound strength of the joints. Furthermore, the optimized laser condition is applied to fabrication of components with the shape of titanium eyeglass frames. The qualities of the obtained joints were confirmed by a stripping test, cyclic bending test, metallographic observation and hardness determination. It was revealed that the laser welding method is more reasonable than conventional resistance brazing methods.     

Effect of bonding conditions on the bonding strength in an aluminum bonding using ultrasonic vibrations and high-frequency induction heating in an atmosphere

ABSTRACT

The needs of aluminium joints have grown in recent years. However, as aluminium forms strong oxide layers on the surface in an atmosphere, joining of these materials is difficult. This is why we conceived a new atmosphere solid-phase bonding method that uses high-frequency induction heating and ultrasonic vibration. The effects of ultrasonic vibration and bonding conditions on this new bonding method were investigated. As a result, we were able to confirm the efficacy of ultrasonic waves on bonding. The bonding mechanism of new bonding method was also clear.     

Ca2+-ATPase Molecules as a Calcium-Sensitive Membrane-Endoskeleton of Sarcoplasmic Reticulum

The Ca²⁺-transport ATPase of sarcoplasmic reticulum (SR) is an integral, transmembrane protein. It sequesters cytoplasmic calcium ions released from SR during muscle contraction, and causes muscle relaxation. Based on negative staining and transmission electron microscopy of SR vesicles isolated from rabbit skeletal muscle, we propose that the ATPase molecules might also be a calcium-sensitive membrane-endoskeleton. Under conditions when the ATPase molecules scarcely transport Ca²⁺, i.e., in the presence of ATP and ≤ 0.9 nM Ca²⁺, some of the ATPase particles on the SR vesicle surface gathered to form tetramers. The tetramers crystallized into a cylindrical helical array in some vesicles and probably resulted in the elongated protrusion that extended from some round SRs. As the Ca²⁺ concentration increased to 0.2 µM, i.e., under conditions when the transporter molecules fully carry out their activities, the ATPase crystal arrays disappeared, but the SR protrusions remained. In the absence of ATP, almost all of the SR vesicles were round and no crystal arrays were evident, independent of the calcium concentration. This suggests that ATP induced crystallization at low Ca²⁺ concentrations. From the observed morphological changes, the role of the proposed ATPase membrane-endoskeleton is discussed in the context of calcium regulation during muscle contraction.     

Thixotropic Hydrogels Composed of Self-Assembled Nanofibers of Double-Hydrophobic Elastin-Like Block Polypeptides

Physically crosslinked hydrogels with thixotropic properties attract considerable attention in the biomedical research field because their self-healing nature is useful in cell encapsulation, as injectable gels, and as bioinks for three-dimensional (3D) bioprinting. Here, we report the formation of thixotropic hydrogels containing nanofibers of double-hydrophobic elastin-like polypeptides (ELPs). The hydrogels are obtained with the double-hydrophobic ELPs at 0.5 wt%, the concentration of which is an order of magnitude lower than those for previously reported ELP hydrogels. Although the kinetics of hydrogel formation is slower for the double-hydrophobic ELP with a cell-binding sequence, the storage moduli G′ of mature hydrogels are similar regardless of the presence of a cell-binding sequence. Reversible gel–sol transitions are demonstrated in step-strain rheological measurements. The degree of recovery of the storage modulus G′ after the removal of high shear stress is improved by chemical crosslinking of nanofibers when intermolecular crosslinking is successful. This work would provide deeper insight into the structure–property relationships of the self-assembling polypeptides and a better design strategy for hydrogels with desired viscoelastic properties.     

Effects of Thrombomodulin in Reducing Lethality and Suppressing Neutrophil Extracellular Trap Formation in the Lungs and Liver in a Lipopolysaccharide-Induced Murine Septic Shock Model

Neutrophil extracellular trap (NET) formation, an innate immune system response, is associated with thrombogenesis and vascular endothelial injury. Circulatory disorders due to microvascular thrombogenesis are one of the principal causes of organ damage. NET formation in organs contributes to the exacerbation of sepsis, which is defined as a life-threatening organ dysfunction caused by a dysregulated host response to infection. We have previously reported that recombinant human soluble thrombomodulin (rTM) reduces lipopolysaccharide (LPS)-induced NET formation in vitro. Here, we aimed to show that thrombomodulin (TM)-mediated suppression of NET formation protects against organ damage in sepsis. Mice were injected intraperitoneally (i.p.) with 10 mg/kg LPS. rTM (6 mg/kg/day) or saline was administered i.p. 1 h after LPS injection. In the LPS-induced murine septic shock model, extracellular histones, which are components of NETs, were observed in the liver and lungs. In addition, the serum cytokine (interleukin-1β (IL-1β), interleukin-6 (IL-6), tumor necrosis factor-α (TNF-α), macrophage chemotactic protein-1 (MCP-1), and interleukin-10 (IL-10)) levels were increased. The administration of rTM in this model prevented NET formation in the organs and suppressed the increase in the levels of all cytokines except IL-1β. Furthermore, the survival rate improved. We provide a novel role of TM in treating inflammation and NETs in organs during sepsis.     

Dimethyl Fumarate Promotes the Survival of Retinal Ganglion Cells after Optic Nerve Injury,Possibly through the Nrf2/HO-1 Pathway

This study aimed to verify whether dimethyl fumarate (DMF) promotes the survival of retinal ganglion cells (RGCs) after optic nerve crush (ONC) accompanied by activation of the NF-E2-related factor 2 (Nrf2)/heme oxygenase-1 (HO-1) pathway. We examined changes in the densities of tubulin β3 (TUBB3)-positive RGCs and the amplitudes of the positive scotopic threshold response (pSTR), reflecting the functional activity of RGCs, recorded on an electroretinogram, with daily administration of DMF, on day 7 after ONC. Furthermore, immunohistochemical and immunoblotting analyses were performed to study the activation of the Nrf2/HO-1 pathway using retinas treated with daily administration of DMF. Daily administration of DMF increasedthe density of TUBB3-positive RGCs in a dose-dependent fashion and significantly increased the amplitude of the pSTR. Immunohistochemical analysis showed that DMF administration increased the immunoreactivity for Nrf2 and HO-1, a potent antioxidant enzyme, in RGCs immunolabeled with RNA-binding protein with multiple splicing (RBPMS). Immunoblotting analysis revealed an increase in the nuclear expression of Nrf2 and marked upregulation of HO-1 after DMF administration. These results suggest that DMF has survival-promoting effects in RGC after ONC, possibly via the Nrf2/HO-1 pathway.     

Effective microbial production of poly(4‐hydroxybutyrate) homopolymer by Ralstonia eutropha H16

The effective microbial production of copolyesters of 3‐hydroxybutyrate (3HB) and 4‐hydroxybutyrate (4HB) with high mole fractions of 4HB units by a wild‐type strain of Ralstonia eutropha H16 was investigated in culture solutions containing 4‐hydroxybutyric acid (4HBA) and various carbon substrates in the presence of a nitrogen source such as ammonium sulfate. The addition of glucose or acetic acid to the culture solution containing 4HBA in the presence of ammonium sulfate resulted in the production of random copolymers of P(3HB‐co‐4HB) with compositions of up to 82 mol% 4HB, but the yield of copolymers was less than 7 wt% of dried cell weights. In contrast, when n‐alkanoic acids such as propionic acid, butyric acid, valeric acid and hexanoic acid, being subject to β‐oxidation metabolism in the cell, were used as the co‐substrates of 4HBA in the presence of ammonium sulfate, a mixture of copolymers with two different 4HB compositions was produced, and copolyesters with compositions of 93–100 mol% 4HB were isolated from chloroform–n‐hexane insoluble fractions in the mixture of copolymers. Especially, when this wild‐type Ralstonia eutropha H16 was cultivated in a medium containing 4HBA (15 g litre⁻¹), propionic acid (5 g litre⁻¹) and ammonium sulfate (5 g litre⁻¹), namely C/N (mol/mol) = 10, the P(4HB) homopolymer was produced at maximally 34 wt% of dry cell weight (7.8 g litre⁻¹), and the conversion yield of 4HBA to P(4HB) homopolymer resulted in values as high as 21 mol%. © 1999 Society of Chemical Industry