Blends of chlorinated isotactic polypropylene with poly(ethylene-co-vinyl acetate) I. Effect of component polymers composition on the blend miscibility

Chlorinated isotactic polypropylenes (CPP) having various chlorine contents were blended with poly(ethylene-co-vinyl acetate)s (EVA) having various vinyl acetate (VA) contents. The blends were made by casting films from dilute THF solutions and miscibility of the blends was identified by single glass transition temperature, which was confirmed by DSC and dynamic mechanical measurements. Based on the miscibility data from a large number of CPP/EVA combinations, a miscibility map was depicted where CO equivalent weight (CO-EQW) of EVA was plotted against chlorine equivalent weight (Cl-EQW) of CPP. Though an attractive interaction between CPP and EVA could be detected in all the miscible and immiscible blend pairs, miscibility of the CPP/EVA blends could solely be observed in a relatively narrow range of Cl-EQW ca. 65–100 and CO-EQW ca. 170–230.     

Fluidized bed combustion of high ash anthracite: Analysis of combustion efficiency and particle size distribution

Fluidized bed combustion of high ash anthracite (HAA) was experimentally studied. The combustor consists of 0.25 m ID bed, and auxiliary equipments for coal feeding, ash removal, lemperature control, etc. Experimental results elucidate main cause of fuel loss to be elutriation of fines (i.e., flyash) containing unburned carbon. However, detailed balances of particle size distribution show majority of carbon in flyash comes from fines contained in the feed instead of attrition of coarse particles. The latter is the main source of flyash for conventional coal. The difference is due to much smaller attrition rate of HAA; feed HAA particles do not shrink much in size by combustion and attrition.     

Nitrogen removal using recycled polystyrene bottles as biofilm media

The performance of an attached growth wastewater treatment process was investigated in an effort to improve nitrogen removal efficiency. Recycled Yakult (lactic acid fermentation drink) bottles made of polystyrene were used as a biofilm media. The use of Yakult bottles as a biofilm media has been attempted by numerous researchers in Japan for the removal of solids and organics. However, these studies focused only on the removal of solids and organics. This study extended their application to the removal of nitrogen for domestic sewage treatment. Yakult media was placed in a reactor with 70% apparent reactor volume in a conventional A/O process. The bottom of the Yakult media was removed, and randomly filled Yakult media were effectively able to reduce the flow in tanks, resulting in an increase in the contact time between pollutants and microorganisms. With higher HRT, the nitrogen removal efficiency was increased by up to 83% with 12 hr of HRT. Nitrification appeared to be the limiting factor of nitrogen removal at an HRT that is less than 12 hr, indicating that the Yakult process requires more retention time to achieve nitrification compared to other biofilm processes. The removal efficiencies of organics and solids were high regardless of the change of operational parameters. This article is based on a presentation in “The 7th Korea-China Workshop On Advanced Materials” organized by the Korea-China Advanced Materials Cooperation Center and the China-Korea Advanced Materials Cooperation Center, held at Ramada Plaza Jeju Hotel, Jeju Island, Korea on August 24–27, 2003.     

Thermodynamic reassessment of the Cd−Zn system

The Cd−Zn system has been thermodynamically reassessed with the CALPHAD method by combining more recent experimental data, in particular the activities of zinc in the liquid phase. A good agreement is obtained between the calculated and experimental thermodynamic parameters as well asphase boundaries.     

1984 A camptown story

This essay examines Kim Yongt’ae’s photocollage DMZ, which consists of photo-portraits he acquired from commercial photo studios in US military camptowns in South Korea. The co-founding member of the South Korean artist group Hy?nsilgwa par?n (Reality and Utterance), Kim visited camptowns in 1984. There, he found hundreds of studio photo-portraits depicting Korean women and American GIs serving United States Forces Korea (USFK). While discussions on “found” photographs often center on the discourses of archive, appropriation, or vernacularity appended by the cultural specificity of their origins, this essay proposes a new framework through which Kim’s work is explored: transnational militarism and “disidentification” — a concept put forth by José Esteban Muñoz on minoritarian performativity. Through this framework, DMZ challenges the binary reading of camptown subjects as victim and victimizer and proposes the performative formation of a new subjectivity.     

Electromigration effect on Sn-58 % Bi solder joints with various substrate metallizations under current stress

The electromigration behavior of low-melting temperature Sn-58Bi (in wt%) solder joints was investigated with a high current density between 3 and 4.5 × 10³ A/cm² between 80 and 110 °C. In order to analyze the impact of various substrate metallizations on the electromigration performance of the Sn-58Bi joint, we used representative substrate metallizations including electroless nickel immersion gold (ENIG), electroless nickel electroless palladium immersion gold (ENEPIG), and organic solderability preservatives (OSP). As the applied current density increased, the time to failure (TTF) for electromigration decreased regardless of the temperature or substrate metallizations. In addition, the TTF slightly decreased with increasing temperature. The substrate metallization significantly affected the TTF for the electromigration behavior of the Sn-58Bi solder joints. The substrate metallizations for electromigration performance of the Sn-58Bi solder are ranked in the following order: OSP-Cu, ENEPIG, and ENIG. Due to the polarity effect, current stressing enhanced the fast growth of intermetallic compounds (IMCs) at the anode interface. Cracks occurred at the Ni₃Sn₄ + Ni₃P IMC/Cu interfaces on the cathode sides in the Sn-58Bi/ENIG joint and the Sn-58Bi/ENEPIG joint; this was caused by the complete consumption of the Ni(P) layer. Alternatively, failure occurred via deformation of the bulk solder in the Sn-58Bi/OSP-Cu joint. The experimental results confirmed that the electromigration reliability of the Sn-58Bi/OSP-Cu joint was superior to those of the Sn-58Bi/ENIG or Sn-58Bi/ENEPIG joints.     

A systematic review of the literature on patient priorities for general practice care. Part 1: Description of the research domain

To make health care more responsive to patient needs, insight into patient priorities is needed. A systematic literature review, using electronic and manual searches, was made of studies on patient priorities with regard to primary health care. Data-extraction was performed by two researchers, followed by systematic analyses of study features. 57 studies were included. The aspects of care and methods used showed a wide variation. Aspects most often included were "informativeness", "humaneness" and "competence/accuracy". Based on an analysis of 19 studies, the following aspects were seen by patients as most important in more than 50% of the studies that included them: "humaneness", "competence/accuracy", "patients' involvement in decisions", "time for care", "other aspects of availability/accessibility", "informativeness", "exploring patients' needs", "other aspects of relation and communication" and "availability of special services".     

Betweenness parameterized above tight lower bound

We study ordinal embedding relaxations in the realm of parameterized complexity. We prove the existence of a quadratic kernel for the Betweenness problem parameterized above its tight lower bound, which is stated as follows. For a set V of variables and set C of constraints “vi is between vj and vk”, decide whether there is a bijection from V to the set {1,…,|V|} satisfying at least |C|/3+κ of the constraints in C. Our result solves an open problem attributed to Benny Chor in Niedermeier's monograph “Invitation to Fixed-Parameter Algorithms”. The betweenness problem is of interest in molecular biology. An approach developed in this paper can be used to determine parameterized complexity of a number of other optimization problems on permutations parameterized above or below tight bounds.     

Memory effects of all‐solution‐processed oxide thin‐film transistors using ZnO nanoparticles

Abstract— Non‐volatile memory effects of an all‐solution‐processed oxide thin‐film transistor (TFT) with ZnO nanoparticles (NPs) as the charge‐trapping layer are reported. The device was fabricated by using a soluble MgInZnO active channel on a ZrHfO^x gate dielectric. ZnO NPs were used as the charge‐trapping site at the gate‐insulator—channel interface, and Al was used for source and drain electrodes. Transfer characteristics of the device showed a large clockwise hysteresis, which can be used to demonstrate its memory function due to electron trapping in the ZnO NP charge‐trapping layer. This memory effect has the potential to be utilized as a memory application on displays and disposable electronics.