Characterization of the Advanced Satellite for Cosmology and Astrophysics x-ray telescope: preflight calibration and ray tracing

The x-ray properties of multinested thin-foil mirror x-ray telescopes (XRT's) on board ASCA, the Advanced Satellite for Cosmology and Astrophysics, were fully evaluated with an x-ray pencil beam.Scanning over the telescope aperture of 35 cm in diameter with an x-ray pencil beam, we found the effective area of a set of XRT's to be 325, 200, and 113 cm(2) at energies of 1.5, 4.5, and 8.0 keV, respectively. We derive the point-spread functions (PSF's) of the XRT's by measuring the image profile at the focal plane with an x-ray CCD. The PSF is found to exhibit a sharp core concentrated within 30 arcsec and a broad wing extended to 3 arcmin in half-power diameter. We also evaluate the contribution of stray light, which is caused by the single reflection of x rays by primary or secondary mirrors and by the backside reflection of the mirrors. To obtain the characteristics of the XRT in the energy region of 0.5-10.0 keV, incorporated with the measurements at discrete energies, we develop a ray-tracing method with the telescope design parameter, the PSF, and optical constants. In particular, we obtain the optical constants around the gold-atom M shell (Au-M) absorption-edge energies by measuring the reflectivity of our mirror sample, with monochromatized x-rays in the energy range of 2.0-3.5 keV from synchrotron radiation. Taking into account the PSF's and optical constants, we find that our ray-tracing program can reproduce all these XRT performances.     

Discharge properties and chemical stability of SrZrO films

Abstract— MgO thin film is currently used as a surface protective layer for dielectric materials because MgO has a high resistance during ion sputtering and exhibits effective secondary electron emission. The secondary‐electron‐emission coefficient γ of MgO is high for Ne ions; however, it is low for Xe ions. The Xe content of the discharge gas of PDPs needs to be raised in order to increase the luminous efficiency. Thus, the development of high‐γ materials replacing MgO is required. The discharge properties and chemical surface stability of SrO containing Zr (SrZrO) as the candidate high‐γ protective layer for noble PDPs have been characterized. SrZrO films have superior chemical stability, especially the resistance to carbonation because of the existence of a few adsorption sites due to their amorphous structure. The firing voltage is 60 V lower than that of MgO films for a discharge gas of Ne/Xe = 85/15 at 60 kPa.     

Audio-visual speech recognition integrating 3D lip information obtained from the Kinect

Audio-visual speech recognition (AVSR) has shown impressive improvements over audio-only speech recognition in the presence of acoustic noise. However, the problems of region-of-interest detection and feature extraction may influence the recognition performance due to the visual speech information obtained typically from planar video data. In this paper, we deviate from the traditional visual speech information and propose an AVSR system integrating 3D lip information. The Microsoft Kinect multi-sensory device was adopted for data collection. The different feature extraction and selection algorithms were applied to planar images and 3D lip information, so as to fuse the planar images and 3D lip feature into the visual-3D lip joint feature. For automatic speech recognition (ASR), the fusion methods were investigated and the audio-visual speech information was integrated into a state-synchronous two stream Hidden Markov Model. The experimental results demonstrated that our AVSR system integrating 3D lip information improved the recognition performance of traditional ASR and AVSR system in acoustic noise environments.     

Pathophysiology of experimental nonoliguric acute renal failure

We have identified an integral membrane protein of 145 kD (estimated by SDS-PAGE) of rat liver nuclear envelopes that binds to WGA. We obtained peptide sequence from purified p145 and cloned and sequenced several cDNA clones and one genomic clone. The relative molecular mass of p145 calculated from its complete, cDNA deduced primary structure is 120.7 kD. Antibodies raised against a synthetic peptide represented in p145 reacted monospecifically with p145. In indirect immunofluorescence these antibodies gave punctate staining of the nuclear envelope. Immunogold EM showed specific decoration of the nuclear pores. Thus p145 is an integral membrane protein located specifically in the "pore membrane" domain of the nuclear envelope. To indicate this specific location, and based on its calculated relative molecular mass, the protein is termed POM 121 (pore membrane protein of 121 kD). The 1,199-residue-long primary structure shows a hydrophobic region (residues 29-72) that is likely to form one (or two adjacent) transmembrane segment(s). The bulk of the protein (residues 73-1199) is predicted to be exposed not on the cisternal side but on the pore side of the pore membrane. It contains 36 consensus sites for various kinases. However, its most striking feature is a repetitive pentapeptide motif XFXFG that has also been shown to occur in several nucleoporins. This nucleoporin-like domain of POM 121 is proposed to function in anchoring components of the nuclear pore complex to the pore membrane.     

Advanced coded-aperture imaging system for nuclear medicine

An advanced coded imaging system is described, and some results of phantom experiments are presented. The advanced method uses a pair of coherent codes (+ 1 and -1 codes) and has many advantages compared with conventional ones. One of the greatest advantages is that there are no sidelobes in the focal plane and only a few in other planes. Therefore, when an object can be regarded as two-dimensional, it is perfectly reconstructed with high detecting efficiency, and this is successfully simulated by a thyroid phantom with 99mTc. Moreover, this system has an ability to reconstruct tomograms, which is also shown by using ring phantoms piled on one another with some cold spots in their shells. From these experimental results it may be concluded that the new system is useful for practical applications, for example, to nuclear medicine.     

Chemical and Chromatic Bases for Preferential Visiting By the Cabbage Butterfly, Pieris rapae, to Rape Flowers

Scent and coloration of corolla were examined as floral attributes responsible for preferential visiting by the cabbage butterfly, Pieris rapae, to rape flower, Brassica rapa. Floral volatile components that release the flower-visiting behavior of the butterfly were identified by chemical analyses, electroantennography (EAG), and two behavioral bioassays: proboscis extension reflex (PER) in response to odor and attraction to artificial flowers. GC and GC-MS analyses of the headspace volatiles from the flowers revealed the presence of six aromatic compounds, benzaldehyde, phenylacetaldehyde, benzyl alcohol, 2-phenylethanol, phenylacetonitrile, and indole in decreasing order of quantity. Of these, phenylacetaldehyde elicited the highest response in the PER assay. While benzyl alcohol, 2-phenylethanol, benzaldehyde, and phenylacetonitrile evoked moderate responses, the PER-eliciting activity of indole was very weak. In two-choice behavioral bioassays, artificial flowers scented with any one of these PER-active compounds attracted significantly more butterflies than control (unscented) flowers, whereas those treated with indole were almost inactive. The EAG activities of the six chemicals were not high and were about the same at a low dose (1 g), but phenylacetaldehyde elicited a much stronger response from both sexes at higher doses (10 and 100 g). An overall profile of EAG responses at a dose of 100 g was analogous to that of PER performance, suggesting that floral volatiles may be involved in close-range location or recognition of flowers rather than long-range attraction. By spectroscopic and UV-photographic examinations of rape flower, the central part of the corolla was found to absorb UV rays in marked contrast to the other parts, which reflected near-UV rays (_max = 350 nm). This indicates that the flower is endowed with a conspicuous nectar guide that is probably an important visual stimulus for attracting foraging adults of P. rapae. Consequently, the present findings strongly suggest that this elaborate pollination strategy of rape flower, characterized by its good combination of olfactory and visual attractiveness, accounts for preferential visiting by the cabbage butterfly to the flower.     

Crystal orientation changes of Ag thin films on the Si(111) substrate due to tribo-assisted recrystallization

Crystal orientation changes of Ag thin films due to the tribo-assisted recrystallization have been studied using grazing incidence X-ray diffraction with synchrotron radiation. After preparation of an Si(111) √3 × √3-Ag surface, a 5-nm-thick Ag film was deposited on the surface at the substrate temperature of 303 K in an ultra-high vacuum chamber. The friction experiments were carried out using a diamond pin-on-plate type tribometer just after the Ag deposition in the same UHV chamber. We found that the coefficient of friction of the Ag films on the Si(111) √3 × √3-Ag surface decreases from 0.07 to 0.03, with increasing reciprocal sliding cycles. In synchronization with the coefficient change, Ag{100} grains are gradually disappearing. As a result, the Ag{111} grains cover the entire surface after 50 sliding cycles. Moreover, we found that the domain size of the Ag{111} grains increases with increasing reciprocal sliding cycles by measuring the rocking curve width. These results directly show that the Ag(111) plane is the sliding plane of friction and the coefficient of friction of Ag films is determined by the fraction of the Ag(111) grains in the Ag films. Moreover, to clarify the reaction between the Ag film and the Si substrate due to the tribo-assisted recrystallization, the substrate strain has been studied by an extremely asymmetric X-ray diffraction technique using synchrotron radiation.     

Statistical analysis for multiplicatively modulated nonlinear autoregressive model and its applications to electrophysiological signal analysis in humans

Modulating the dynamics of a nonlinear autoregressive model with a radial basis function (RBF) of exogenous variables is known to reduce the prediction error. Here, RBF is a function that decays to zero exponentially if the deviation between the exogenous variables and a center location becomes large. This paper introduces a class of RBF-based multiplicatively modulated nonlinear autoregressive (mmNAR) models. First, we establish the local asymptotic normality (LAN) for vector conditional heteroscedastic autoregressive nonlinear (CHARN) models, which include the mmNAR and many other well-known time-series models as special cases. Asymptotic optimality for estimation and testing is described in terms of LAN properties. The mmNAR model indicates goodness-of-fit for surface electromyograms (EMG) using electrocorticograms (ECoG) as the exogenous variables. Concretely, it is found that the negative potential of the motor cortex forces change in the frequency of EMG, which is reasonable from a physiological point of view. The proposed mmNAR model fitting is both useful and efficient as a signal-processing technique for extracting information on the action potential, which is associated with the postsynaptic potential.     

Simplified analysis of steady-state crack growth of piezoelectric ceramics based on the continuum damage mechanics

Summary A simplified analysis of crack growth of piezoelectric ceramics was performed by using the double cantilever beam (DCB) model. The analysis was intended for the crack growth in a steady state by using some assumptions to simplify the analysis. In the present paper, damage within piezoelectric ceramics was represented by a damage variable based on the continuum damage mechanics, and the effect of the damage on material properties was taken into account in a constitutive equation of the piezoelectric ceramics. The constitutive equation and an evolution equation of the damage variable were applied to the DCB model. Then, the crack growth in the DCB model was dealt with within the framework of the continuum damage mechanics. As a result of the analysis, a constant crack growth rate and distribution of stress, strain and damage variable in front of the crack tip were elucidated, and the effects of the applied electric field on the crack growth were discussed in particular.