Dual-band reactively loaded microstrip antenna

A previously derived theory is applied to a microstrip antenna with a reactive load to produce a dual-band radiator. A model consisting of a rectangular patch radiator loaded with a variable length short-circuited coaxial stub was investigated experimentally. Comparisons of theoretical predictions and experimental data are made for the impedance and resonant frequencies as a function of the position of the load, the length of the stub, and the characteristic impedance of the stub.     

Interleaved concatenated coding for the turbulent atmosphericdirect detection optical communication channel

The performance of two concatenated coding systems using a K =3, R=1/2 convolutional inner code and a Reed-Solomon (RS) (15, 9) or (15, 7) outer code was measured over a 5.76-km-long atmospheric direct detection optical communication channel. Inner code interleaving of 100 μs combined with outer code interleaving of 240 bits (60 RS symbols) was found to be sufficient to obtain a decoded BER of less than 10^-6 under conditions of moderate channel turbulence and an average of 6-10 detected photons per channel bit     

Theoretical performance of direct detection optical communication with AlGaAs laser transmitters, avalanche photodiode detectors, and color-coded PPM signaling

Theoretical performance characteristics are presented for a direct detection optical communication system that has peak power limited laser diode transmitters and avalanche photodiode photodetectors. The singal format consists of the transmission of a group ofLbinary source digits as a single light pulse at one ofNnonoverlapping optical center frequencies (colors) in one ofMpossible time slots. The system achieves a given received symbol error probability at lower peak signal intensities with a less complicated receiver structure than can be obtained with an ordinary pulse position modulation system of the same alphabet size and source data rate.     

Using tolerance maps to validate machining tolerances for transfer of cylindrical datum in manufacturing process

Process planers typically utilize different datum features than designers use when specifying tolerances. Datum features used in process plans are chosen to simplify setups and achieve desired geometric accuracy. Meanwhile, proper machining tolerances are required to be reassigned to satisfy design requirements. However, existing methods to transfer geometric tolerances directly and accurately are still missing due to incompatible mathematical models of tolerances. Also, the affection of material conditions on datum and partial constraint situations have not been deeply considered yet. Since cylindrical features are often used as datum features, this paper describes the use of tolerance maps (T-Maps) (patent no. 6963824) and manufacturing maps (M-maps) to establish analytical relationship among all relevant design and machining tolerances for transfer of cylindrical datum. Firstly, a parametric model of datum transfer is proposed to describe factors involving the process. Next, based on spatial and geometric parameters, as well as tolerances information, variation analysis among features is implemented to formulate transformed T-Maps, sum of which constructs M-Map. Then, distinct bounding boxes of cross-sections in M-Map are extracted through computing vertex coordinates of their boundaries due to complete and partial constraint scenarios. Thereafter, by virtue of bounding boxes, relationship among design and machining tolerances are obtained through fitting M-Maps into T-Maps. Finally, an example is introduced to verify feasibility of the proposed model and method.     

Process Lethality Prediction for Escherichia coli O157:H7 in Raw Franks During Cooking and Fully Cooked Franks During Post-cook Pasteurization

ABSTRACT: Thermal inactivation D (decimal reduction time at a certain heating temperature) values of Escherichia coli O157:H7 at 55 °C to 70 °C were 21.36 to 0.031 min in raw franks and 24.91 to 0.038 min in fully cooked franks. Although statistically significant differences were found on the D values of E. coli O157:H7 between raw and fully cooked franks, the z value of E. coli O157:H7 in raw franks (5.07 °C) and fully cooked franks (5.08 °C) was not significantly different. The obtained D and z values were used to validate the process lethality of the pathogen in the raw franks that were processed according to a multistage cooking/cooling schedule or in the fully cooked franks that were pasteurized in-packages via steam. In this study, the calculated process lethality for both the cooking (process lethality = 254 min) and post-cook pasteurization (process lethality = 39 min) processes was far greater than the processing time that was needed for achieving a 7D reduction of E. coli O157:H7 during cooking and post-cook pasteurization of the franks.     

Depressive symptoms erode self-esteem in severe mental illness: A three-wave, cross-lagged study.

Vulnerability, scar, and reciprocal-relations models of depressive symptoms and self-esteem were compared among people with severe mental illness (SMI; N=260) participating in a partnership-based intervention study. Assessments were conducted at baseline, midway through the intervention (after 4 months), and at termination (after 9 months). Cross-lagged, structural equation modeling analyses revealed that participants' baseline depressive symptoms predicted a decrease in self-esteem in the first 4 months but not in the subsequent 5 months of participation. Exploratory regression analyses indicated that improved social functioning buffered this deleterious effect of depressive symptoms. These findings, which are consistent with the scar model, highlight the fragile nature of the self and the importance of social functioning in recovery from SMI. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Encoding and selective activation of "metabolic memories" in the rat.

Experiment 1 used Pavlovian conditioning procedures to show that rats formed distinct memorial representations of 2 (peanut oil and sucrose pellets) unconditioned stimuli (USs) that could be activated by 2 different conditioned stimuli (CSs). After training in Experiment 2, rats injected with the lipid antimetabolite Na-2-mercaptoacetate (MA) responded more to the CS for oil than to the CS for sucrose. This pattern was not shown by rats that received isotonic saline or systemic 2-deoxy-d-glucose (a glucose antimetabolite). By contrast, intracerebroventricular infusion of the glucose antimetabolite 5-thioglucose selectively promoted responding to the CS for sucrose (Experiment 4). Thus, lipoprivic and glucoprivic treatments selectively promoted the activation of the memories of fat and carbohydrate USs, respectively. In Experiment 3, the capacity of MA to augment responding to a CS for oil was abolished for rats that received subdiaphragmatic vagal deafferentation. This indicates that the capacity of lipoprivic signals to selectively activate the representations of fat USs may depend on vagal afferent fibers. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Electrical characterization and modeling of alternating-currentthin-film electroluminescent devices

Electrical characterization of evaporated ZnS:Mn alternating-current thin-film electroluminescent (ACTFEL) devices is accomplished by capacitance-voltage (C-V) analysis. Interpretation of these C-V characteristics is aided by SPICE modeling and by electrical characterization of an ideal ACTFEL device constructed from discrete components, based on a simple equivalent circuit for the ACTFEL device. Various features of the C -V curve are ascribed to equivalent circuit parameters and associated device physics parameters     

Theoretical Evaluation of Flange Local Buckling for Horizontally Curved I-Girders

Curvature greatly complicates the behavior of horizontally curved steel plate girders used in bridge superstructures. The warping stress gradient across the width of I-girder flange plates reduces the vertical bending stress at which the flange plate buckles. The 2007 AASHTO Load and Resistance Factor Design Specifications eliminate the shortcomings of the 2003 AASHTO Guide Specifications for Horizontally Curved Bridges by unifying the flexural design of tangent and curved I-girder bridges. This paper evaluates flange local buckling resistance based upon theoretical and analytical models that consider the effect of stress gradient across the flange coupled with the influence of rotational resistance provided by the web. The developed equations are verified using the finite element method, and the potential impact is demonstrated using the design example presented in the Guide Specifications.