Growth monitoring and classification of rice fields using multitemporal RADARSAT-2 full-polarimetric data

Spaceborne synthetic aperture radar (SAR) can be used for agricultural monitoring. In this study, three single-polarimetric and four full-polarimetric observation data sets were analysed. A rice paddy field in northern Japan was used as the study site; the data for this site were obtained using RADARSAT-2, which carries a full-polarimetric C-band SAR. Soybean and grass fields were also present within the paddy fields. The temporal change in the backscattering coefficient of the rice paddy fields for the single-polarization data agreed with the temporal change obtained for a rice growth model based on radiative transfer theory. A three-component decomposition approach was applied to the full-polarimetric data. With each rice growth stage, the volume scattering component ratio increased, whereas the surface scattering component ratio generally decreased. The soybean and grass fields showed a smaller double-bounce scattering component than the rice fields for all the acquired data. The results of this study show that multitemporal observation by full-polarimetric SAR has great potential to be utilized for estimating rice-planted areas and monitoring rice growth.     

Influence of shape and size on residual stress in ceramic/metal joining

The effects of shape and size on the residual stress on the surfaces of silicon nitride/Invar alloy joints have been examined by means of the strain gauge method. The highest residual stress perpendicular to the interface appeared near the corners in the rectangular bond face joint. It was tensile in the silicon nitride and compressive in the Invar alloy. The highest tensile stress in the rectangular bond face joint was larger than that in the circle bond face joint. The larger the diameter of the cylindrical joint used, the larger was the tensile stress induced. The residual stress parallel to the interface was compressive in silicon nitride while that in the Invar alloy was tensile.     

Realization of an extremely low reflectance surface based on InP porous nanostructures for application to photoelectrochemical solar cells

Extremely low reflectance was obtained from InP porous nanostructures in UV, visible, and near-infrared ranges. Porous samples were electrochemically prepared on which 130-nm-diameter nanopores were formed in a straight, vertical direction and were laterally separated by 50-nm-thick InP nanowalls. The reflectance strongly depended on the surface morphology. The lowest reflectance of 0.1% in the visible light range was obtained after the irregular top layer had been completely removed. Superior photoelectrochemical properties were obtained on the InP porous structures due to two unique features: the large surface area inside pores, and the large photon absorption enhanced on the low reflectance surface.     

In Situ Formation of Hexaferrite Magnets within a 3Y-TZP Matrix: La2O3–ZnO–Fe2O3 and BaO–Fe2O3 Systems

The in situ formation of magnetoplumbite-type (M-type) hexaferrites within a 3Y-TZP matrix was examined for the La₂O₃–ZnO–Fe₂O₃ and BaO–Fe₂O₃ systems. The formation of barium hexaferrite (Ba-M) was rapid enough at a temperature of 1300°C for 2 h to result in a uniform dispersion of fine Ba-M particles in a tetragonal zirconia polycrystal (TZP) matrix. However, the formation of lanthanum-substituted hexaferrite (La-M) was rather sluggish, despite the existence of a charge-compensating divalent oxide. The 3Y-TZP/20-wt%-BaFe₁₂O₁₉ in situ composite possessed good magnetic properties, as well as moderately good mechanical properties.     

Conditional transformation of immunoglobulin mutation pattern from gene conversion into point mutation by controlling XRCC3 expression in the DT40 B cell line

A hypermutating B cell line DT40 is useful for screening antibodies and improving affinity of the selected antibodies in vitro. To perform affinity maturation efficiently, we generated an engineered DT40 line whose immunoglobulin mutation pattern can be transformed from gene conversion into point mutation by conditional suppression of XRCC3 expression.     

Structure of effective catalyst layers around bubbles in a fluidized catalyst bed

In a fluidized catalyst bed, the reactant gas transfers from the bubble phase to the emulsion phase and reactions proceed in the emulsion phase. The catalyst particles around the bubbles should contact the gases containing a high concentration of the reactants. Therefore, the effect of the catalysts around the bubbles is very important for estimating the conversion and selectivity in the reactor. In order to study the role of these catalysts, the hydrogenation of carbon dioxide was carried out in a fluidized catalyst bed. Based on the results, the amount of the catalyst that was effective for the reaction was calculated. In addition, the shape of the bubbles ascending in the fluidized catalyst bed was observed using a fast X-ray computer tomography (CT) scanner. The structure of the bubbles in the fluidized catalyst bed was very complicated and the surface area of the bubbles was much greater than the obtained when assuming spherical shaped bubble. By assuming that effective catalysts existed around the bubbles, the thickness of catalyst layer was obtained. Finally, the 3-dimensional images of the catalyst layers around the bubbles were reconstructed.     

Agglomeration of magnesium oxide particles formed by the decomposition of magnesium hydroxide

The agglomeration process of MgO powder derived from Mg (OH)₂ was investigated at fixed temperatures of 600, 800, 900 and 1200° C; these temperatures were chosen as representative of four regions, i.e. below 600° C, 650 to 850° C, 850 to 1050°C and 1050 to 1200° C previously reported. At 600° C, coherent crystallites coalesced within the heating time of 60 min; on further heating till 300 min, the primary particles which consisted of crystallites grew rapidly. The original Mg (OH)₂ framework or pseudomorphs, composed of minute crystallites and primary particles, still remained in the powder. At 800° C, the pseudomorphs had disintegrated into fragments. The crystallite growth and primary particle growth were accelerated with increasing the heating times beyond 60 min. At 900° C, a further fragmentation of agglomerates occurred with increasing the heating times; the crystallite and primary particle growth in fragments brought about the pore coalescence. At 1200° C, the crystallite and primary particle growth proceeded with the coarsening of pores; on heating beyond 240 min, the crystallites and primary particles grew rapidly due to the entrapment of pores within them.     

Influence of Bile Salts on the Permeability Through the Nasal Mucosa of Rabbits of Insulin in Comparison with Dextran Derivatives

The nasal drug absorption and the effect of absorption promoters have been studied in rabbits. Nasal mucosa excised from rabbits was mounted as a flat sheet in an in vitro chamber. The result indicates that the change in the porosity of the membrane by pretreatment with bile salts increased the permeability coefficient of sodium chloride in the nasal membrane. The permeabilities of dextran derivatives were enhanced by pretreatment with sodium glycocholate (GC). The permeability coefficient (P) of fluorescein isothiocyanate diethylaminoethyl dextran     

Improvement of strength distribution inside slab concrete by vacuum dewatering method

The strength and hardness of concrete slab surface is considered significantly affected by bleeding of concrete. It has been reported that dewatering by vacuum processing is quite effective to obtain high density of concrete. The method, however, has not been successfully used for the concrete work in the field of building construction, compared with that of civil engineering works in Japan. In the present study, firstly the state of the art concerning vacuum dewatering method is reviewed and the newly improved vacuum dewatering method is introduced. Then the effect of the proposed method on concrete properties of slab is examined by a series of experiments in order to find more reasonable and effective way in the application of the proposed method.