Effects of polyglycerol esters of fatty acids and ethylene‐vinyl acetate co‐polymer on crystallization behavior of biodiesel

Biodiesel fuels (BDF) have many problems in the cold due to their crystallization properties. In particular, precipitation of large crystals of high‐melting fractions in BDF at low temperatures remarkably changes cold flow property of BDF and, thereby, it increases the values of cold filter plugging point. In this study, we evaluated polyglycerol esters of fatty acids (PGE) and ethylene‐vinyl acetate co‐polymer (EVA) as chemical additives to improve the cold flow property of palm oil‐based FAME (PFME). The results of solid fat content measurement indicate that the simultaneous addition of PGE and EVA showed synergistic effects on suppression of crystallization of PFME, however such effect was not observed when EVA was used alone. DSC thermograms indicated that the PGE additives not only decreased the crystallization temperature but also kinetically suppressed the crystal growth. Polarized light microscopy showed that the simultaneous addition of PGE and EVA led to the formation of considerably small and fine‐dispersed crystals of PFME. These results indicate that combined effects of PGE and EVA caused the formation of fine‐dispersed PFME crystals, which could improve the viscous properties of palm oil‐based BDF at relatively cold temperatures.     

Photoluminescence of Rare-Earth-Doped Ca-α-SiAlON Phosphors: Composition and Concentration Dependence

Rare-earth-doped Ca-α-SiAlON phosphors, with the compositions of (Ca_{1−3/2 x} RE _x ) _{m /2}Si_{12− m − n} Al _m+n O _n N_{16− n} (RE=Ce, Sm, and Dy, 0.5≤ m =2 n ≤3.0), were prepared by sintering at 1700°C for 2 h under 10 atm N₂. The concentration of rare earths varied from 3 to 30 at.% with respect to Ca. The photoluminescence (PL) properties were investigated as functions of the composition of the host matrix (i.e., m ) and the concentration of rare earths (i.e., x ). The results show that the emission properties can be optimized by tailoring m and x . The Ce³⁺ luminescence originating from the 4 f –5 d interconfigurational transitions is greatly affected by the environment surrounding the Ce³⁺ ions, which differs from the Sm³⁺ or Dy³⁺ luminescence arising from the 4 f –4 f intraconfigurational transitions. X-ray diffraction and scanning electron microscopy were used to explain the composition and concentration dependence of PL properties.     

Optimal periodic maintenance strategy under an intermittently used environment

In this paper, the optimal periodic replacement-like strategy with minimal repairs is considered under an intermittently used environment. Suppose that transactions or jobs with exponential service times arrive at a system according to a homogeneous Poisson process and the system is alternatively in either a busy or an idle period subject to demand for use. We derive approximately the optimal preventive maintenance schedule which minimizes the relevant expected cost criterion for the system which behaves intermittently on an M/M/1 queueing process, and compare it with the usual maintenance schedule for the continuously used system.     

Highly Stable Au Nanoparticles with Tunable Spacing and Their Potential Application in Surface Plasmon Resonance Biosensors

Colloidal Au‐amplified surface plasmon resonance (SPR), like traditional SPR, is typically used to detect binding events on a thin noble metal film. The two major concerns in developing colloidal Au‐amplified SPR lie in 1) the instability, manifested as a change in morphology following immersion in organic solvents and aqueous solutions, and 2) the uncontrollable interparticle distance, determining probe spacing and inducing steric hindrance between neighboring probe molecules. This may introduce uncertainties into such detecting techniques, degrade the sensitivity, and become the barricade hampering colloidal Au‐based transducers from applications in sensing. In this paper, colloidal Au‐amplified SPR transducers are produced by using ultrathin Au/Al₂O₃ nanocomposite films via a radio frequency magnetron co‐sputtering method. Deposited Au/Al₂O₃ nanocomposite films exhibit superior stability, and average interparticle distances between Au nanoparticles with similar average sizes can be tuned by changing surface coverage. These characteristics are ascribed to the spacer function and rim confinement of dielectric Al₂O₃ and highlight their advantages for application in optimal nanoparticle‐amplified SPR, especially when the probe size is smaller than the target molecule size. This importance is demonstrated here for the binding of protein (streptavidin) targets to the probe (biotin) surface. In this case, the dielectric matrix Al₂O₃ is a main contributor, behaving as a spacer, tuning the concentration of Au nanoparticles, and manipulating the average interparticle distance, and thus guaranteeing an appropriate number of biotin molecules and expected near‐field coupling to obtain optimal sensing performance.     

Disorders and oxygen vacancies in p-type Sn2B2O7 (B = Nb,Ta): Role of the B-site element

Sn₂Nb_2−xTa_xO₇ (x = 0.0–2.0) with pyrochlore structure is a promising material for p-type oxide semiconductors. A systematic study of its Nb/Ta ratio indicated that the hole–generation efficiency of the Nb end (Sn₂Nb₂O₇) was an order of magnitude lower than that of the Ta end (Sn₂Ta₂O₇). Although this occurs due to differences in oxygen-vacancy formation, the origins of the hole–generation efficiencies remain unclear due to limited information on local and global crystal-structure disorders in pyrochlore Sn₂Nb₂O₇ and Sn₂Ta₂O₇. In this study, the crystal structures of Sn₂B₂O₇ (B = Nb, Ta), composed of BO₆ octahedra and Sn₄O tetrahedra, were investigated using X-ray absorption spectroscopy and X-ray diffraction. A detailed investigation of the local and global crystal structures indicated a larger amount of disorder in the Sn₄O tetrahedra in Sn₂Nb₂O₇ compared to Sn₂Ta₂O₇; disorder in the BO₆ octahedra occurred only in Sn₂Ta₂O₇. This study indicates that an appropriate selection of the B-site element is vital for suppressing defect and disorder formation in Sn₄O tetrahedra and subsequently improving the hole–carrier–generation efficiency.     

Development of a strain for efficient degradation of polychlorinated biphenyls by patchwork assembly of degradation pathways

Rhodococcus jostii RHA1 accumulates chlorobenzoates (CBA) during the degradation of polychlorinated biphenyls (PCBs). CBA degradation is considered one of the rate-limiting steps in the complete degradation of PCBs. To reduce the accumulation of CBAs, the upper pathway enzyme genes for PCB degradation of RHA1 were introduced into a CBA-degrading bacterium, Burkholderia sp. NK8. The resulting recombinant strain exhibited no biphenyl 2,3-dioxygenase (BphA) activity encoded by bphAaAbAcAd genes, which encode the large and small subunits of the terminal oxygenase component and the ferredoxin and reductase subunits responsible for electron transfer from NADH to the large subunit. The remaining enzyme genes involved in the transformation of biphenyl to benzoate, bphB2C1D1, which encode dehydrogenase, ring-cleavage dioxygenase and hydrolase, conferred activities to NK8. To obtain the BphA activity of RHA1 in NK8, sets of BphA genes were constructed by combining the bphAaAbAcAd genes of RHA1 and bphA3A4 of Pseudomonas pseudoalcaligenes KF707, encoding the ferredoxin and reductase subunits. Hybrid derivatives of BphA containing the KF707 bphA3 conferred BphA activity to NK8, and a derivative containing the RHA1 bphAaAb and KF707 bphA3A4 genes exhibited the highest BphA activity. A plasmid containing the RHA1 bphAaAb and KF707 bphA3A4 genes plus the RHA1 bphB2C1D1 genes was constructed and introduced into NK8. The resulting recombinant strain efficiently degraded 2-, 3- and 4-chlorobiphenyls with an apparent reduction in CBA accumulation in comparison to the recombinant mutant strain, which had an insertion in the cbeA gene to inactivate CBA dioxygenase.     

An impedance measurement of a small‐capacitance circuit using transient responses for lightning surge analysis

A method to measure a small capacitance with its loss resistance using a set of transient current waveforms is proposed in this paper. The parameters are obtained from the time constants in the time domain. The method has high resistance to extraneous noise, because a time‐to‐frequency transformation, which is sensitive to noise, is not required. The transient current waveforms are obtained by a voltage or current source, a current transformer, and a waveform recorder. The measured capacitance by the proposed method is not affected by the capacitance of the voltage probe, because it is obtained without any voltage information. The sheath surge impedance of the current injection cable, which is indispensable for the transient measurement, is corrected. The application of the method has the advantage in that it allows the modeling of a fast transient of a power apparatus, comparing it with the steady‐state measurement using an impedance measuring instrument. The proposed method is applied to create an equivalent circuit between electrodes implanted into a piece of wood, and its reliability is confirmed by comparison between the measured and calculated results. Stray capacitances of a miniature circuit breaker are also measured, and the results show that the proposed method is applicable to equipment in power systems. © 2014 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.