Dependence of property, cathode characteristics, thermodynamic stability, and average and local structures on heat-treatment condition for LiNi0.5Mn0.5O2 as a cathode active material for Li-ion battery

LiNi_0.5Mn_0.5O₂ was heat-treated under high oxygen-pressure and Ar-reducing conditions, and then the cathode properties, thermodynamic stability and average and local structures were investigated. From X-ray diffraction and ICP measurements, it was found that the pristine LiNi_0.5Mn_0.5O₂ had a single phase of the layered rock-salt structure although the Ni content was slightly rich compared with the nominal one. These characteristics were kept even after the heat-treatments. Charge–discharge cycle tests clarified that the cycle performance of LiNi_0.5Mn_0.5O₂ was improved by both the reducing and oxidizing treatments. From neutron diffraction and X-ray absorption fine structure measurements, the local distortion around the transition metal, especially Ni, was supposed to be one of the important factors to determine the cathode properties. It was also found that the sample with higher thermodynamic stability exhibited better capacity retention in the discharge–charge cycle tests.     

Optical and adhesive properties of composite silica-impregnated Ca-α-SiAlON:Eu2+ phosphor films prepared on silica glass substrates

The compaction of a Eu-doped Ca-α-SiAlON phosphor powder was performed by electrophoretic deposition (EPD). The effect on the adhesion and optical properties of the silica precursor as both a binder of the powder and a filler of the air voids were evaluated. The adhesion of the silica impregnated composite film to the silica glass substrate was characterized by the tape test. The improvement of the external quantum efficiency was confirmed from the PL spectra measurement after the silica impregnation. The temperature dependence of the external quantum efficiency was also investigated in order to discuss the advantage of using the silica precursor as a binder for high-brightness LED applications.     

Preparation and characterization of stable dispersions of carbon black and nanodiamond in culture medium for in vitro toxicity assessment

Stable dispersions of carbon black and nanodiamond in culture medium were prepared by adding a pre-mixed dispersion of commercial carbon black or nanodiamond in aqueous bovine serum albumin (BSA) solution to culture medium. Dynamic light scattering revealed that carbon black and nanodiamond dispersions prepared in both NaCl solution and culture medium were highly stable. From DLVO theory and the results of zeta potential measurements, the theoretical effect of the electrostatic interactions between adsorbed BSA molecules was found to be minimal. The asymmetric flow field-flow fractionation measurements revealed that 0.05 or 0.56 mg/mL of BSA molecules were adsorbed on 0.11 or 1.09 mg/mL of carbon black, respectively, indicating 1:2 complexation of BSA with the colloidal particles. In the case of nanodiamond, 0.06 or 0.60 mg/mL of BSA molecules were adsorbed on 0.10 or 1.05 mg/mL of nanodiamond, respectively, indicating 1:2 complexation of BSA, which is the same ratio as in the case of carbon black. The adsorbed BSA molecules served as an effective stabilizing agent for the carbon black and nanodiamond, ensuring dispersion stability for at least 1 week. The preparation of the dispersions can be easily carried out by other researchers for toxicity studies.     

Particle morphology, electrical conductivity, crystal and electronic structures of hydrothermally synthesized (Ce,Sr)PO4

We focused on Sr-substituted CePO₄—i. e., (Ce,Sr)PO₄—with the monazite structure and synthesized the orthophosphates hydrothermally. As for the obtained products, we investigated the particle morphologies by SEM and electrical conduction properties by conductivity measurements. In order to estimate the crystal and electronic structures, neutron and synchrotron X-ray diffraction measurements were also carried out. As a result, it was found that (Ce,Sr)PO₄ with a single phase of the monazite structure was successfully prepared by the hydrothermal method and the substitution amount of Sr was almost equal to the nominal one. It was also demonstrated that a powder morphology of the (Ce,Sr)PO₄ depended on the synthetic conditions; i.e, concentrations of cation sources and pH of aqueous solution in the hydrothermal process. The Sr-substituted sample showed much higher conductivities than the unsubstituted one, in the same way as the (Ce,Sr)PO₄ synthesized by other methods reported previously.     

Microwave synthesis of Fe-doped β-rhombohedral boron

Iron-doped β-rhombohedral boron was synthesized by 28 GHz microwave irradiation on a powder mixture of iron and β-boron. β-Boron strongly absorbs 28 GHz microwaves, and this strong coupling with microwave energy can be used to promote a reaction with iron dopant. The powder mixture was heated to 1800°C within 2 min by microwave irradiation, resulting in the formation of β-rhombohedral boron interstitially doped with iron. The reaction proceeded rapidly without accompanying grain growth. The XRD analysis and the electrical conductivity measurements revealed successful incorporation of iron into two doping sites of β-boron.     

Reconstitution of hepatic tissue architectures from fetal liver cells obtained from a three-dimensional culture with a rotating wall vessel bioreactor

Reconstitution of tissue architecture in vitro is important because it enables researchers to investigate the interactions and mutual relationships between cells and cellular signals involved in the three-dimensional (3D) construction of tissues. To date, in vitro methods for producing tissues with highly ordered structure and high levels of function have met with limited success although a variety of 3D culture systems have been investigated. In this study, we reconstituted functional hepatic tissue including mature hepatocyte and blood vessel-like structures accompanied with bile duct-like structures from E15.5 fetal liver cells, which contained more hepatic stem/progenitor cells comparing with neonatal liver cells. The culture was performed in a simulated microgravity environment produced by a rotating wall vessel (RWV) bioreactor. The hepatocytes in the reconstituted 3D tissue were found to be capable of producing albumin and storing glycogen. Additionally, bile canaliculi between hepatocytes, characteristics of adult hepatocyte in vivo were also formed. Apart from this, bile duct structure secreting mucin was shown to form complicated tubular branches. Furthermore, gene expression analysis by semi-quantitative RT-PCR revealed the elevated levels of mature hepatocyte markers as well as genes with the hepatic function. With RWV culture system, we could produce functionally reconstituted liver tissue and this might be useful in pharmaceutical industry including drug screening and testing and other applications such as an alternative approach to experimental animals.     

Benzobisthiazole as Weak Donor for Improved Photovoltaic Performance: Microwave Conductivity Technique Assisted Molecular Engineering

New donor–acceptor‐type copolymers comprised of benzobisthiazole (BBTz) as a weak donor rather than acceptor are proposed. This approach can simultaneously lead to deepening the HOMO and LUMO of the polymers with moderate energy offset against fullerene derivatives in bulk heterojunction organic photovoltaics. As a proof‐of‐concept, BBTz‐based random copolymers conjugated with typical electron acceptors: thienopyrroledione (TPD) and benzothiadiazole (BT) based on density functional theory calculations are synthesized. Laser‐flash and Xe‐flash time‐resolved microwave conductivity (TRMC) evaluations of polymer:[6,6]‐phenyl C₆₁ butyric acid methyl ester (PCBM) blends are conducted to screen the feasibility of the copolymers, leading to optimization of processing conditions for photovoltaic device application. According to the TMRC results, alternating BBTz‐BT copolymers are designed, exhibiting extended photoabsorption up to ca. 750 nm, deep HOMO (–5.5 to –5.7 eV), good miscibility with PCBM, and inherent crystalline nature. Moreover, the maximized PCE of 3.8%, the top‐class among BBTz‐based polymers reported so far, is realized in an inverted cell using TiO_x and MoO_x as the buffer layers. This study opens up opportunities to create low‐bandgap polymers with deep HOMO, and shows how the device‐less TRMC evaluation is of help for decision‐making on judicious molecular design.