An energy trading system with consideration of CO2 emissions

Abatement of CO₂ emission is one of the most important issues in the 21st century regarding preservation of the earth environment. This paper addresses a utility operations planning problem for distributed energy management systems (DEMSs), where we are to obtain optimal plans that minimize both costs and CO₂ emissions. A DEMS consists of multiple entities that seek their own economic profits. In this paper, we give a mathematical formulation of the utility operations planning problem for each entity, and propose an energy trading market, which utlizes a multi‐attribute auction protocol in order to deal with both a price and a CO₂ emission rate. Experimental results show that collaboration among entities through the market provides a more profitable plan for each entity and abatement of CO₂ emission is also achieved. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 162(4): 54–63, 2008; Published online in Wiley InterScience ( www.interscience.wiley. com ). DOI 10.1002/eej.20418     

AC side harmonic and phenomena accompanying DC-injection of utility-interactive PV system

The experiments investigated phenomena related to direct contact between the DC output of a PV array and the AC power from the utility grid. The results show that the DC power flows through the distribution transformers (DC-injection) saturating their magnetic circuits. The saturation of magnetic circuits makes peak currents, incorporating a large portion of even harmonics, flow through the high-voltage side of the distribution transformer, adding the level of harmonic distortion of its exciting current. With the increase of injecting DC-current to the utility grid, peak currents at the primary side of distribution transformer increases the most, and even among the same effective (rms) values, the increase of primary side current is larger than that of the secondary side current.     

Integrated-Circuit and Packet-Switching Applications to a Loop System for Local Area Networks

The Universal Link System belongs to the "loop subsystem" of a local area network (LAN). This system has circuit-switching facilities and packet-switching facilities, and uses a local area network as an integrated switching system. The Universal Link System is well suited for a very wide range of uses, with the merits of both circuit switching and packet switching. The Outline of this system is described below.     

Parallel processing of network calculations in order to speed up transient stability analysis

Power systems have become very large, and in addition the forthcoming open electricity market will make power system operation more complex. Therefore, power system operation must become more efficient and flexible. Very fast power system simulation is a means of achieving more sophisticated power system on‐line monitoring and control, and parallel computing is a key technology for very fast power system simulation. This paper proposes an efficient and fast parallel network calculation algorithm that will contribute to the development of fast power system simulation programs. Numerical examples show that the proposed method using six processors is about 4.0 times as fast as the usual serial algorithm when applied to a large‐scale radial power system and about 3.2 times as fast when applied to a large‐scale loop power system. © 2001 Scripta Technica, Electr Eng Jpn, 135(3): 26–36, 2001     

Increase of stress intensity near interface edge of elastic-creep Bi-material under a sustained load

The transition from small-scale creep to large-scale creep ahead of a crack tip or an interface edge with strong elastic stress singularity at the loading instant causes stress relaxation and the decrease of stress intensity in general. However, this study shows that the stress near the interface edge of bi-material with no or weak elastic stress singularity increases after the loading instant and brings about the stress concentration during the transition. In addition, the creep strain distribution of this bi-material after the loading instant is different from that occurred in the transition of an interface edge with strong elastic stress singularity or a crack tip (notch root). The criterion for the increase or decrease of stress intensity near the interface edge proved by the finite element method is proposed in this study. The stress intensity near the interface edge increases when the elastic stress singularity is lower than the creep stress singularity (λ^el < λ^cr) and vice versa.     

Relation between Mechanical Twinning and Cracking in Stoichiometric Lithium Niobate Single Crystals

The relationships between cracking and mechanical twinning, and between ferroelectric polarization and mechanical twinning, in stoichiometric LiNbO₃ were investigated in the present study. Three sets of mechanical twins crossed one another, and the crossed points of those twins provided preferred sites for the nucleation of cracks. Mechanical twins of LiNbO₃ revealed a head-to-tail arrangement of ferroelectric polarization, and complicated polarization states were observed at the crossed points. Some possible mechanisms of crack nucleation and propagation are proposed in this paper.     

2.5 Gb/s CPFSK coherent multichannel transmission experiment forhigh capacity trunk line system

A 2.5-Gb/s CPFSK four-channel FDM transmission experiment has been conducted with a 150-km-long nondispersion-shifted fiber. This system employed a wideband channel space controller, a common polarization control, and a channel identification function. These were indispensable for realizing a high-capacity, coherent FDM trunk line system. The results of the experiment confirm the feasibility of trunk line systems with over 160-Gb/s capacity     

Effect of friction,strain hardening,and strain rate hardening on the metal flow in rod extrusion

The metal flow in a rod extrusion is theoretically discussed in relation to a frictional condition, strain hardening and strain rate hardening. An existing rigid plastic FEM-program was modified in order to take a rate sensitivity of a material into consideration through a constitutive equation of the form. An interfatial friction was incorporated by a constant Coulomb-frictional coefficient. When the frictional coefficient is smaller than 0.1, a large effect of the friction does not appear. The larger the n-value is, the stronger the distortion of the grid in a billet becomes even under small frictional resistance. The effect of the m-value is similar qualitatively to that of the n-value. When the rate sensitive material is extruded at very low punch speed under large frictional resistance, the material is strained very irregularly all over the billet at an early stage.     

Quantum-Mechanical Properties of Protons in Solid Molecular Hydrogen at Megabar Pressures

Quantum distributions of protons in three high-pressure phases of solid molecular hydrogen are investigated by the first-principles path integral molecular dynamics (FP-PIMD) method, in which interatomic forces are calculated precisely based on the density functional theory. The distributions have entirely different symmetries from those predicted by conventional simulation with classical treatment of protons. Especially in phase II, we found that molecular rotation is hindered by quantum fluctuation of protons, having a strong resemblance to a quantum distribution of impurity muonium in crystalline silicon. The mechanism of this “quantum localization” is clarified by a detailed study of the potential energy surface for the molecular rotation.     

1.5 mu m band travelling-wave semiconductor optical amplifiers with window facet structure

1.5 mu m band travelling-wave semiconductor optical amplifiers (TWAs), characterised by their window facet structure and symmetrised active waveguide, have been developed. 1.5 dB spectral gain ripple and 1.3 dB TE-TM mode gain difference at 22 dB signal gain were achieved simultaneously. An average facet reflectivity as low as 0.06% was estimated.<>