Prediction of sand mass and organic matter distribution via in situ measured wet sediment bulk density profile

The objective of the study is to develop a spatial prediction model of sand mass and organic matter distribution in an urban stormwater holding pond using in situ measured wet sediment bulk density profile data to spatially distinguish the most likely contaminated sediment deposit areas. The wet bulk density profiles of deposited sediment at 25 locations in the Berembang (Malaysia) stormwater holding pond were measured using a single-probe nuclear density gauge. The sand and organic matter compositions of the surface sediment sample, 5 cm thickness from the bed surface, were determined. Discriminant analysis (DA) was conducted to generate two Fisher’s linear discriminant functions for the prediction of sand mass and organic matter composition areas, respectively. The linear discriminant functions generated better area classifications of surface organic matter composition compared to the sand mass distribution using wet sediment bulk density data measured at more than 15 cm depth levels.     

Flexural response of hybrid carbon fiber thin cement composites

It is evident that the carbon-fiber-reinforced cementitious composites are being used in the structural and construction works owing to the synergetic action from two components viz. fiber and mortar matrix. Incorporation of a very nominal percentage of carbon fibers into a mortar mixture produces a strong and durable composite that leads the product of smart material properties. Flexural behavior of cement-based matrices carrying carbon fibers reinforcement of different percentage and size is studied in this paper. Influence of fiber content and length of the fiber is quantified using load–deflection curves. Specimens containing fiber of 0.0, 0.5, 1.0 and 1.5% with 3 mm (0.12 in.), 6 mm (0.36 in.), and their combination are prepared and tested. It is demonstrated that combination of 3 mm (0.12 in.) and 6 mm (0.36 in.) fibers enhances the bearing capacity to crack- and ultimate-stresses as well as the Young’s modulus of the fiber reinforced cement composites. The paper emphasizes the desired performances after the initiation of cracks and discusses the pre- and post-cracking load–deflection characteristics of the composites.     

Synthesis of mesoporous titania nanoparticles with anatase frameworks and investigation of their photocatalytic performance

In this research paper, we synthesize various types of mesoporous titania nanoparticles (MTNs) with suitable surface area and pore size while creating anatase frameworks by applying hydrothermal treatment or calcination at different temperatures. Wide-angle XRD patterns and N2 adsorption-desorption isotherms reveal that the MTNs with crystallized anatase frameworks can be synthesized after an optimized hydrothermal treatment. In contrast, calcination of MTNs at high temperature caused the collapse of mesoporous structure, resulted in drastic reduction of the surface area of the MTNs. In addition, we investigate the photocatalytic activity of the prepared MTNs by measuring the degradation of methylene blue (MB). The results show that the reaction rates of the photocatalytic MB decomposition strongly depend on the degree of crystallinity in the MTNs frameworks and on the surface area of MTNs.     

Case Study: Flood Mitigation of the Muda River, Malaysia

The 2003 flood of the Muda River reached 1,340?m3/s at Ladang Victoria and adversely impacted 45,000 people in Malaysia. A flood control remediation plan proposed a levee height based on a 50-year discharge of 1,815?m3/s obtained from hydrologic models. This design discharge falls outside the 95% confidence intervals of the flood frequency analysis based on field measurements. Instream sand and gravel mining operations also caused excessive riverbed degradation, which largely off sets apparent benefits for flood control. Pumping stations have been systematically required at irrigation canal intakes. Several bridge piers have also been severely undermined and emergency abutment protection works were needed in several places. Instream sand and gravel mining activities should be replaced with offstream mining in the future.     

Effect of V2O5–TeO2 Glass Addition on Dielectric Properties of CaCu3Ti4O12 Ceramics Prepared by Solid State Method

CaCu₃Ti₄O₁₂ (CCTO) is well known to have colossal dielectric constant in the range of 10⁵. However, CCTO has considerably high dielectric loss values (tanδ > 0.1) at room temperature and 1 kHz. In this work, addition of glass to CCTO was suggested in order to improve its dielectric properties. The effect of V₂O₅–TeO₂ (VT) glass addition on microstructure and dielectric properties of CCTO ceramics were investigated. Dielectric measurements were carried out for (1 ? x) CCTO-(x) V₂O₅–TeO₂ (x = 0, 0.03, 0.05, 0.10) samples in the frequency range of 10²–10⁶ Hz using impedance spectrometer. Electron micrographs showed that low melting VT glass addition facilitated the grain growth of CCTO. As VT glass amount increased, dielectric constant decreased. The drop, though within reasonable values (~10⁵), may related to the presence of grain boundary glassy phase which itself has low dielectric constant. However, the dielectric loss of the composite has decreased after VT glass addition. The low melting V₂O₅–TeO₂ glass aided in liquid phase sintering and improved the grain boundary resistance which resulted in decreased leakage currents.     

Fatty acid and amino acid composition of three local Malaysian Channa spp. fish

The objective of this current study was to analyze the biochemical compositions of three Malaysian Channa spp. fish. The proximate analysis revealed that the protein content of Channa lucius, Channa micropeltes and Channa striatus was 19.9%, 22.1%, 23.0% (% of dry weight), respectively. The total lipid content was generally high, ranging from 5.7% to 11.9% and crude ash ranged from 1.0% to 1.8%. The major amino acids were glutamic acid, aspartic acid and lysine, ranging from 9.7% to 21.7%, and the most abundant fatty acid in Channa spp. was C16:0, ranging from 25.6% to 30.4%. The other major fatty acids detected were C22:6, C18:1 and C18:0. The level of arachidonic acid (C20:4) was unusually high in C. striatus (19.02%). The levels of DHA in these fish would also explain the use of Channa spp., especially C. striatus, which has been used for centuries for reducing pain, inflammation and promote wound healing in Malaysia.     

A rapid, sensitive and economic method for the detection, quantification and confirmation of aflatoxins.

A rapid, sensitive and economic method for the detection, quantification and confirmation of aflatoxins is described. Aflatoxins B1, B2, G1, and G2, are extracted by methanol/water (85 + 15) and partitioned into methylene dichloride. The methylene dichloride solution is cleaned up on a polypropylene column, filled with 0.5 g silica gel 60. The aflatoxins are eluted with chloroform-acetone (90:10) and are detected using bidirectional thin-layer chromatography (TLC) with aluminium silica gel foil. The mean recovery of aflatoxins B1, B2, G1, and G2 in corn samples was 73, 78, 80, and 64%, respectively; the limit of detection was 0.5 micrograms/kg. The results can also be confirmed by derivative formation using trifluoroacetic acid on the TLC plate. The method has been applied to a wide range of foods with good results.     

Gel,thermal, and X‐ray diffraction characterization of virgin,scrapped polyethylene and its blends

The characterizations of virgin and scrapped polyethylene samples (VPE and SPE) and VPE/SPE blends were studied using different analytical techniques. The obtained data regarding crosslink density demonstrated that the radiation‐induced crosslinking of VPE, SPE, and VPE/SPE samples increased as a result of increasing irradiation dose, blending VPE with SPE, and loading the VPE/SPE blend with trimethylol propane triacrylate (TMPTA). The use of differential scanning calorimetry technique was aimed at revealing the effect of sample composition (VPE, SPE, and VPE/SPE) and also the effect and type of irradiation on the melting temperature (T_m) and the heat of transformation (ΔH_f). The melting temperature and heat of transformation increased with increasing either irradiation dose or loading the polymeric samples with TMPTA. In addition, the application of thermogravimetric analysis (TGA) was used to study the degradation characteristics of the polymeric samples in terms of onset temperature (T_i), temperature at maximum weight loss (T_s), and activation energy (E_a). The TGA results showed that the irradiation (EB and γ‐rays) and loading of polymeric samples with TMPTA led to a thermally stable polymeric matrix with higher T_i, T_s, and E_a values. The blank SPE sample or those blend rich in SPE matrix were highly thermally stable than that blank VPE one. The X‐ray diffraction investigation illustrated that VPE samples undergoes phase transformation between orthorhombic, monomclinic, and/or hexagonal as a result of irradiation. POLYM. COMPOS. 27:709–717, 2006. © 2006 Society of Plastics Engineers     

Nitrogen dioxide effect in the reduction of nitric oxide by propane in oxidizing atmosphere

The role of nitrogen dioxide in the selective reduction of NO by propane over a Cu-MFI zeolite is investigated. NO₂ and NO reductions were carried out under similar conditions of reaction. In the presence of oxygen, the reduction of NO by C₃H₈ does not differ significantly from that of NO₂. In the absence of oxygen, the reduction of NO₂ by propane occurs with a partial decomposition of the nitric dioxide molecule. Such a decomposition leads to the formation of oxygen, which is responsible for the increase in catalytic activity by comparison with the same reaction performed with NO. NO₂ formed and released in the gas phase during the reduction of NO by propane in the presence of oxygen does not play a predominant role in the catalytic process.