Biofiltration of xylene emissions: bioreactor response to variations in the pollutant inlet concentration and gas flow rate

In order to remove xylene vapors from an air stream, an upflow laboratory scale biofilter was operated for a period of 2 months. The experimental study consisted of two different phases: in the first phase, the biofilter was operated at various gas flow rates and the xylene inlet concentration was maintained at 1.39 g m⁻³. In the second phase, various inlet concentrations of the contaminant were tested at a constant gas flow rate of 0.4 m³ h⁻¹ corresponding to an empty bed residence time of 150 s. The biofilter response to steep and abrupt variations in the xylene inlet concentration and gas flow rate was examined. The results obtained revealed that the removal efficiency of the biofilter regained its high values (above 96%) in less than 24 h following the change to low concentrations and gas flow rate. Temperature measurements showed that the biofilter temperature strongly depends on the intensity of the microbial activity in the filter bed. The experimental mass ratio of carbon dioxide produced to the xylene removed was equal to 2.72 indicating that the contaminant was eliminated exclusively by aerobic biodegradation. These findings suggest that a follow up of the amount of carbon dioxide produced in the filter bed can be very helpful in monitoring the performance of the biofilter. For relatively small inlet loads of xylene, the contributions of the different sections of the biofilter to the removal efficiency of the contaminant and the carbon dioxide production were unevenly balanced but became more uniformly distributed for relatively high inlet loads.     

CFD as an approach to understand flammable dust 20 L standard test: Effect of the ignition time on the fluid flow

A computational study based on the Euler–Lagrange approach was developed for the characterization of flammable dusts in the 20 L sphere standard test. The aim of the study was to analyze some parameters that might affect the experimental data (e.g., cold turbulence and particle size). The turbulence of a wheat starch cloud was described with the Detached Eddy Simulation model. Both the pressure of the system and the RMS velocity were compared with the flow patterns established with a particle image velocimetry analysis. It was concluded that the rebound nozzle forms a cloud that is composed by clumps. This fact implies dissimilarities between the local concentrations and the nominal value. Finally, a granulometric analysis established that the mean diameter of the particle size distribution (PSD) decreased by 69% during the dispersion. Thus, it is suggested to consider the PSD at the ignition zone rather than the PSD of the sample. © 2017 American Institute of Chemical Engineers AIChE J, 63: 42–54, 2018     

Modeling heterogeneous photocatalytic inactivation of E. coli using suspended and immobilized TiO2 reactors

A study was carried out to develop a kinetic model of the photocatalytic inactivation of Escherichia coli using different TiO₂ catalysts. The model developed is based on a reaction scheme that involves effectively coupling mass‐transfer fluxes between bacteria and catalyst surface on one hand and bacterial degradation reaction on the other. The photocatalytic results were derived from experiments led in a batch reactor under both dark and Ultra Violet (UV) irradiation conditions. Using a reference catalyst, the robustness of the developed model was tested under solar conditions. The experimental data validated the model as successfully able to reproduce evolutions in the viable bacteria concentration in the range of parameters studied without any further adjustment of the kinetic parameters. The model was used to simulate the bacterial degradation kinetics under different working conditions to describe the partitioning of both bacterial adhesion and photocatalytic reaction in the solution to be treated © 2015 American Institute of Chemical Engineers AIChE J, 61: 2532–2542, 2015     

Induction of Oxidative Stress and Antioxidative Mechanisms in Arabidopsis thaliana after Uranium Exposure at pH 7.5

To evaluate the environmental impact of uranium (U) contamination, it is important to investigate the effects of U at ecologically relevant conditions. Since U speciation, and hence its toxicity, strongly depends on environmental pH, the present study aimed to investigate dose-dependent effects of U at pH 7.5. Arabidopsis thaliana plants (Mouse-ear Cress) were exposed for three days to different U concentrations at pH 7.5. In the roots, the increased capacities of ascorbate peroxidase and glutathione reductase indicate an important role for the ascorbate-glutathione cycle during U-induced stress. However, a significant decrease in the ascorbate redox state was observed after exposure to 75 and 100 µM U, indicating that those roots are severely stressed. In accordance with the roots, the ascorbate-glutathione cycle plays an important role in the antioxidative defence systems in A. thaliana leaves exposed to U at pH 7.5 as the ascorbate and glutathione biosynthesis were upregulated. In addition, small inductions of enzymes of the antioxidative defence system were observed at lower U concentrations to counteract the U-induced stress. However, at higher U concentrations it seems that the antioxidative defence system of the leaves collapses as reductions in enzyme activities and gene expression levels were observed.     

Dynamic methods and new reactors for liquid phase molecular catalysis

Kinetic data acquisition and screening of transition metal complexes for homogeneous liquid phase catalysis calls for numerous testing in multiphase G/L, L/L and G/L/L systems. It is shown first, with an example in asymmetric hydrogenation, why detailed kinetics must be performed. Then, new reactors leading to fast experimental techniques are proposed. A liquid–liquid centrifugal partition chromatography is evaluated for determining rate constants and partition isotherms by combining frontal analysis and elution chromatography, the catalyst being maintained in a stationary aqueous phase. Two microreactors offering short residence time have also been tested and compared with a fast test reaction (t_R ca. 5–20 s). The combination of reacting pulses, carrier liquids and micromixer is proposed as a general high throughput tool for the investigation of G/L, L/L and G/L/L catalytic systems in a fast sequential way.     

Synthesis and in Vitro Characterisation of Ifenprodil‐Based Fluorescein Conjugates as GluN1/GluN2B N‐Methyl‐D‐aspartate Receptor Antagonists

GluN2B‐containing NMDA receptors are involved in many important physiological functions and play a pivotal role in mediating pain as well as in several neurodegenerative disorders. We aimed to develop fluorescent probes to target the GluN2B subunit selectively in order to allow better understanding of the relationships between receptor localisation and physiological importance. Ifenprodil, known as the GluNR2B antagonist of reference, was chosen as the template for the elaboration of probes. We had previously reported a fluorescein conjugate that was shown (by confocal microscopy imaging of DS‐red‐labelled cortical neurons) to bind specifically to GluN2B. To elaborate this probe, we explored the influence of both the nature and the attachment point of the spacer between the fluorophore and the parent compound, ifenprodil. We performed chemical modifications of ifenprodil at the benzylic position and on the phenol ring by introducing secondary amine or amide functions and evaluated alkyl chains from two to 20 bonds either including or not including secondary amide functions as spacers. The previously developed probe was found to display the greatest activity in the inhibition of NMDA‐induced Ca²⁺ influx by calcium imaging experiments on HEK293 cells transfected with the cDNA encoding for GluN1‐1A and GluN2B. Further investigations revealed that this probe had a neuroprotective effect equivalent to that of ifenprodil in a standard test for neurotoxicity. Despite effects of lesser amplitude with these probes relative to ifenprodil, we demonstrated that they displaced [³H]ifenprodil in mouse brain slices in a similar manner.     

Reversibly crosslinked self‐healing PCL‐based networks

Poly(ε‐caprolactone) (PCL)‐based thermoreversible networks with self‐healing properties were prepared through Diels–Alder (DA) and retro‐DA reactions. Bis‐ or Tris‐maleimide compounds and a series of copolymer(caprolactone‐diene) PCL_XF_Y (X: degree of polymerization and Y: furan‐average functionality) with Y between 2.4 and 4.9 were used. The successive sequences of formation and dissociation of polycaprolactone networks via DA and retro‐DA reactions were observed repeatedly by dynamic mechanical analyses (DMA) and their gel‐temperatures determined. The cross‐linking densities, thermal properties, and thermal reversibility of the PCL_XF_Y/multimaleimide polymers have been modulated by the structure and functionalities of the used diene and dienophile moieties. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013