Effect of dispersity on the Tll (>Tg) transition in polystyrene

The presence of a high temperature (>T_g) relaxation in amorphous polystyrene has been investigated further. In the previous work,¹ the techniques of differential thermal analysis (DTA) and torsional braid analysis (TBA) were employed to study polystyrene as a function of “monodisperse” molecular weight. The occurrence of the T_ll transition appeared to be associated with the attainment of a critical viscosity level with also corresponded with a free volume level. An entanglement network developed at a critical value of molecular weight, M_c, giving a break in the T_ll-versus-M plots. The present work deals with the influence of dispersity on the T_ll transition, below and above M_c. A series of binary blends of “monodisperse” anionically polymerized polystyrenes with systematic changes in M?_n and heterogeneity index (M?_w/M?_n) was tested by TBA. The results show that when both components have molecular weights below M_c, single and average values of T_g and T_ll are observed which are linearly related to M?_n^?1, as predicted by free volume arguments. Although a single T_g is observed when one component has a molecular weight above and the other has a molecular weight below M_c, the components appear to undergo the T_ll relaxation independently. The results indicate that both the glass transition and the T_ll transition are basically governed by the same type of molecular motion but at different length ranges.     

Combined effect of high pressure treatment and anti-microbial bio-sourced materials on microorganisms' growth in model food during storage

Antimicrobial bio-sourced films based on poly(lactic acid) containing either carvacrol or allyl isothiocyanate (AITC) were prepared and their antimicrobial properties were assessed on Botrytis cinerea during storage and after a high pressure (HP) “pasteurisation-like” treatment (up to 800 MPa at ambient temperature). A dry process (extrusion + thermomoulding) was used to shape the material. The high temperature encountered during film processing dramatically decreased the carvacrol and AITC content in the film, leading to a less efficient antimicrobial activity. The use of β-cyclodextrin (β-CD) to encapsulate the active compounds before film processing proved to be efficient to protect the AITC against thermal degradation and to control its release from the films during its use. PLA-based films containing either AITC or β-CD encapsulated AITC showed a significant activity against B. cinerea. An effective combination between the antimicrobial activity of AITC-based films and the high pressure treatment was observed on a model food system (PDA) inoculated with N × 10⁴ (N ~ 1–9) conidia of B. cinerea. An HP treatment of only 300 MPa associated with an antimicrobial PLA/β-CD system providing an initial quantity of active agents equivalent to 4 mg of AITC/L of air (i.e. almost 2 folds lower than the minimal inhibition concentration of the active packaging used alone, which was determined to be equal to 10 mg/L of air in the same conditions) was found more efficient (total inhibition of B. cinerea growth during 10 days) than an 800 MPa HP treatment used alone (increase of the lag phase growth of 3.3 days).

Industrial relevance

The consumer demand for “fresh like” product containing reduced amount of preservatives without compromising human and environmental safety needs the development of new preservation strategies. As a consequence, the concept of “hurdle technologies” has risen up. The combined effect of HP treatment and volatile antimicrobial packaging allowed the use of lower individual treatment intensities to inhibit B. cinerea growth. Combining such “hurdles” is of relevance in the context of development of low-cost and eco-friendly food technologies.     

Synthesis and in Vitro Characterisation of Ifenprodil‐Based Fluorescein Conjugates as GluN1/GluN2B N‐Methyl‐D‐aspartate Receptor Antagonists

GluN2B‐containing NMDA receptors are involved in many important physiological functions and play a pivotal role in mediating pain as well as in several neurodegenerative disorders. We aimed to develop fluorescent probes to target the GluN2B subunit selectively in order to allow better understanding of the relationships between receptor localisation and physiological importance. Ifenprodil, known as the GluNR2B antagonist of reference, was chosen as the template for the elaboration of probes. We had previously reported a fluorescein conjugate that was shown (by confocal microscopy imaging of DS‐red‐labelled cortical neurons) to bind specifically to GluN2B. To elaborate this probe, we explored the influence of both the nature and the attachment point of the spacer between the fluorophore and the parent compound, ifenprodil. We performed chemical modifications of ifenprodil at the benzylic position and on the phenol ring by introducing secondary amine or amide functions and evaluated alkyl chains from two to 20 bonds either including or not including secondary amide functions as spacers. The previously developed probe was found to display the greatest activity in the inhibition of NMDA‐induced Ca²⁺ influx by calcium imaging experiments on HEK293 cells transfected with the cDNA encoding for GluN1‐1A and GluN2B. Further investigations revealed that this probe had a neuroprotective effect equivalent to that of ifenprodil in a standard test for neurotoxicity. Despite effects of lesser amplitude with these probes relative to ifenprodil, we demonstrated that they displaced [³H]ifenprodil in mouse brain slices in a similar manner.     

Modeling heterogeneous photocatalytic inactivation of E. coli using suspended and immobilized TiO2 reactors

A study was carried out to develop a kinetic model of the photocatalytic inactivation of Escherichia coli using different TiO₂ catalysts. The model developed is based on a reaction scheme that involves effectively coupling mass‐transfer fluxes between bacteria and catalyst surface on one hand and bacterial degradation reaction on the other. The photocatalytic results were derived from experiments led in a batch reactor under both dark and Ultra Violet (UV) irradiation conditions. Using a reference catalyst, the robustness of the developed model was tested under solar conditions. The experimental data validated the model as successfully able to reproduce evolutions in the viable bacteria concentration in the range of parameters studied without any further adjustment of the kinetic parameters. The model was used to simulate the bacterial degradation kinetics under different working conditions to describe the partitioning of both bacterial adhesion and photocatalytic reaction in the solution to be treated © 2015 American Institute of Chemical Engineers AIChE J, 61: 2532–2542, 2015     

Processing–formulation–performance relationships of polypropylene/short flax fiber composites

This work is a comprehensive study of the effect of extrusion process parameters and formulation on the properties of polypropylene (PP)/short flax fiber composites. The parameters that were varied during the twin‐screw extrusion process were screw configuration, revolutions per minute (rpm), extrusion temperature, and flow rate. The effect of the feeding zone location of cellulosic fiber was also considered. This study investigates the effect of the formulation, cellulosic fiber content, the presence of a coupling agent, and of a reactive additive on composite performance. The composites were characterized in terms of morphology and microstructure, fiber length, rheological, thermal, and mechanical properties. Sensibility to humidity and recyclability were also considered. When compared with as‐received PP, the tensile strength of injection‐molded parts increased with cellulosic content by up to 40 vol %, and the tensile modulus increased 3.5 times when a combination of coupling and reactive agents was used. Exposed to controlled humidity of 50% during 1 year, these composites exhibited a very low level of humidity uptake around 0.85 wt %. The processability of these materials using a cast film line and the mechanical properties of extruded sheets are also presented. Furthermore, these materials demonstrate a good recyclability using injection molding by keeping the integrality of their mechanical properties after five reprocessing cycles. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41528.     

Synthesis, Autoorganization and Reactivity of Amphiphilic Derivatives of 1-Aminoisoindole in Water and Formamide

In this work, we present the synthesis of cationic surfactants based on 1-aminoisoindole. The physico-chemical properties were studied by conductometry, tensiometry, dynamic light scattering and transmission electron microscopy in water and in formamide. The reactivity of these novel surfactants has been studied at concentrations below and above critical aggregation concentrations (CAC) and it was found that reactions can proceed in structured media without the addition of other catalysts.     

Wheat gluten-coated papers for bio-based food packaging: Structure,surface and transfer properties

The objective of the present work was to understand how the structural, surface, water vapour and gas barrier properties of wheat gluten (WG) coated paper could be influenced by the features of paper. For this purpose, a surface treated paper (TP) and an untreated paper (UTP) were compared. Penetration of WG-coating into the bulk of paper was more pronounced in UTP than TP. This led to the formation of a significant junction zone resulting in an interpenetrated structure for WG–UTP, suggesting a composite-like structure, while a bi-layer one was obtained for WG–TP. Differences in WG penetration were related to the hydrophilicity, roughness and porosity of the paper used. Even though the extent of penetration did not greatly affect the surface properties (water and oil resistance), the transfer properties (water vapour, O₂ and CO₂) of WG-coated papers were significantly improved when WG-coating highly penetrated: while the WG–TP behaved as a micro-perforated material, the WG–UTP behaved as WG-film.     

Attributes, characteristics, and applications of titanium and its alloys

It is well known that titanium has properties attractive to the aerospace and other industries, and that its applications are limited due to its high cost. This overview will provide those not directly involved with titanium an explanation of why titanium is an attractive material, with aerospace being a primary focus. A brief summary of titanium applications and some of its unique properties will also be discussed.     

Error evaluation on experimental stress–strain curve obtained from tube bulging test

To get precise material data for advanced numerical modelling of tube hydroforming process, the tube bulging test is recommended. Stresses and strains in the tube cannot be evaluated easily and several approaches have been proposed. A review is proposed and points out their advantages and drawbacks.     

Acoustic emissions simulation of tumbling mills using charge dynamics

Knowledge of the internal variables of a mill is of importance in design and performance optimization of the mill, notwithstanding the difficulty in measuring these variables within the harsh mill environment. To overcome this problem, the research has focused on measuring the internal parameters through non-invasive measurement methods such as the use of the vibration/acoustic signal obtained from the mill. Alternatively, virtual instruments, such as discrete element methods (DEM), are employed. Here, a methodology is developed to simulate on-the-shell acoustic signal emitted from tumbling mills using the information extracted from a DEM simulator. The transfer function which links the forces exerted on the internal surface of the mill and the acoustic signal measured on the outer surface is measured experimentally. Given this transfer function and the force distribution obtained from the DEM simulation, and assuming a linear time-invariant response, the on-the-shell acoustic of a laboratory scale ball mill has been simulated. Comparison of this simulated signal with the signal measured experimentally can be used as a criterion to judge the validity of the DEM simulations, and as a tool for enhancing our understanding of both DEM simulations and the use of acoustics within the context of mineral processing. The results derived from preliminary experiments on a laboratory scale mill shows satisfactory agreement between the actual measurement and the simulated acoustic signal.