A Stable Voltage-Programmed Pixel Circuit for a-Si:H AMOLED Displays

Hydrogenated amorphous silicon (a-Si:H) active matrix organic light-emitting diode (AMOLED) displays are attractive given the potentially low manufacturing cost and ultimately low-temperature fabrication enabling using flexible substrates. Although the conventional two thin-film transistor (2-TFT) AMOLED voltage-programmed pixel circuit (VPPC) can provide high resolution and high yield, the 2-TFT VPPC is prone to image retention over time due to shift in the threshold voltage (V_T-shift) of a-Si:H TFTs. This paper presents a new driving scheme that not only preserves the simplicity of the 2-TFT VPPC, but also demonstrates high uniformity. Experimental results indicate that the current drop in the new driving scheme is less than 11% after 15 days of operation whereas it is over 50% for the conventional driving scheme. Moreover, the new driving scheme is less sensitive to temperature variations due to an internal feedback mechanism. After a 70% change in the temperature, the current in the conventional driving scheme increases by as much as 300%. However, the current in the driving scheme presented here is approximately constant     

Frames of Reference in Mobile Augmented Reality Displays.

In 3 experiments, the authors investigated spatial updating in augmented reality environments. Participants learned locations of virtual objects on the physical floor. They were turned to appropriate facing directions while blindfolded before making pointing judgments (e.g., "Imagine you are facing X. Point to Y"). Experiments manipulated the angular difference between the learning heading and the imagined heading and between the actual heading and the imagined heading. The effect of actual-imagined on pointing latency was observed for naive users but not for users with brief training or instructions concerning the fact that objects can move with body movements. The results indicated that naive users used an environment-stabilized reference frame to access information arrays, but with experience and instruction the nature of the representation changed from an environment stabilized to a body stabilized reference frame. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Solar building—European Union Research and Development Programmes

The European Commission's (EC) energy R&D programmes have completed two decades of progress. In the building sector special attention has been given to technology transfer and research dissemination, because of the particular problems which arise given the characteristics of the European construction industry, its diversity and fractured structure, and rather conservative nature.Projects such as the earlier Project MONITOR and BUILDING 2000, and the more recent INNOBUILD and SOLINFO projects and the Solar House programme together represent an unusual, if not unparalleled, effort aimed at bringing about technical change in building design and providing the necessary design and evaluation support and tools to professional architects and students and, to a lesser extent, to engineers. These projects are complemented by (and draw heavily from) an ambitious but clearly-targeted series of research projects investigating major energy-related issues concerning the heating, cooling and daylighting of buildings and deficiencies in knowledge of climate and human comfort, and building performance; activities such as the construction of passive solar test centres in ten EU Member States, each typically with four identical test cells equipped with interchangeable south walls, identical heating and cooling systems, sensors, and data acquisition systems. There is now in Europe considerable emphasis on the challenges of building in warmer climates, and on advancing daylighting design and performance and developing new materials.     

Improved alcohol-fixed smears of fine-needle aspirates for cytology of breast and other palpable lesions

The application of fine-needle aspiration cytology for the diagnosis of solid lesions is well-established. Its sensitivity as a diagnostic tool for both benign and malignant lesions can vary significantly, however, and depends on the quality of the smears submitted. In particular, air-drying artifact can render wet alcohol-fixed smears unsatisfactory for diagnosis. This study examines the basic cause of air-drying artifacts, which is directly related to the moisture of the aspirate that varies among tissues and specimens from any tumor type. A simple modification to the standard smearing technique incorporating precoated slides that introduces moisture into the aspirate is recommended. The technique is applicable to aspirates from all sites without compromising accepted diagnostic cytologic criteria, and offers excellent cytologic clarity with routine stains as well as being flexible enough for other investigative staining methods.     

The influence of breast size on late radiation effects and association with radiotherapy dose inhomogeneity

A prospective assessment of late changes in breast appearance in 559 patients after tumour excision and radiotherapy for early breast cancer noted a strong association with breast size. Only 3/48 (6%) patients with small breasts developed moderate or severe late changes compared with 94/423 (22%) with medium sized breasts and 34/88 (39%) patients with large breasts (p < 0.001). One possibility is that greater radiation changes are related to greater dose inhomogeneity in women with large breasts. To explore this hypothesis, radiation dose distributions were assessed in a separate group of 37 women in whom three-level transverse computer tomographic images of the breast in the treatment position were available. A significant correlation was found between breast size and dose inhomogeneity which may account for the marked changes in breast appearance reported in women with large breasts.     

Exit of the pre-TCR from the ER/cis-Golgi is necessary for signaling differentiation, proliferation, and allelic exclusion in immature thymocytes

A major issue is whether surface expression of the pre-TCR is necessary for signaling the development of immature thymocytes. To address this question, we generated transgenic mice expressing a TCRbeta chain that had a strong endoplasmic reticulum (ER) retrieval signal (TCRbetaER) and that was expressed intracellularly but failed to reach the cell surface. In TCRbetaER transgenic mice, there was a failure of allelic exclusion. Also, the transgene failed to rescue the developmental defects observed in TCRbeta-null mice. In contrast, TCRbeta transgenes with a mutant ER retrieval sequence or lacking this sequence signaled efficient allelic exclusion and suppressed the TCRbeta-/- defect. These data show that exit of the pre-TCR from the ER/cis-Golgi is required for progression through the double-negative thymocyte checkpoint.     

An ergonomic evaluation of nursing assistants' job in a nursing home.

Thirty-eight nursing assistants (NAs) in a nursing home ranked and rated 16 different patient handling tasks for perceived stresses to the low back. The nursing assistants were observed for 79 4 h shifts and were videotaped for 14 4 h shifts to describe a typical workday and to determine the number of patient-handling tasks performed per shift, the use of assistive devices, and biomechanical stresses to the low back. In addition, data were collected on nursing assistants' and patients' characteristics. The top eight ranked tasks included transferring patient from toilet to wheelchair (WC), WC to toilet, WC to bed, bed to WC, bathtub to WC, chairlift to WC, weighing patients and lifting patients up in bed. The mean ratings of perceived exertion for these tasks were between 'somewhat hard' and 'hard'. The estimated compressive force on L5/S1 disc for the 50th percentile patient weight ranged from 3.7 to 4.9 KN. Nursing assistants worked in teams of two and performed 24 patient transfers per 8 h shift by manually lifting and carrying patients. Assistive devices (a hydraulic lift and gait belt) were used less than 2% of the time. Patient safety and comfort, lack of accessibility, physical stresses associated with the devices, lack of skill, increased transfer time, and lack of staffing were some of the reasons for not using these assistive devices. Environmental barriers (such as confined workplaces, an uneven floor surface, lack of adjustability of beds, stationary railings around the toilet, etc.) made the job more difficult. Nursing assistants had a high prevalence of low-back pain and 51% of nursing assistants visited a health care provider in the last three years for work related low-back pain.     

A sensing strategy for the reverse engineering of machined parts

The reverse engineering of machined parts requires sensing an existing part and producing a design (and perhaps a manufacturing process) for it. We have developed a reverse engineering system that has proven effective with a set of machined parts. This paper describes the system, presents some results, and discusses strategy for a new system.This work was supported by ARPA under ARO grant number DAAH04-93-G-0420, DARPA grant N00014-91-J-4123, NSF grant CDA 9024721, and a University of Utah Research Committee grant. All opinions, findings, conclusions or recommendations expressed in this document are those of the authors and do not necessarily reflect the views of the sponsoring agencies.     

Computer simulations of time-dependent suppression of EOF by polymer coatings

We use molecular dynamics simulations in order to investigate the time evolution of the effect of adsorbed polymer coatings on the electro-osmotic flow (EOF) in a capillary. Weakly adsorbed coatings show no time-dependent performance, but they do not strongly reduce the EOF. On the other hand, strongly adsorbed coatings made of longer polymer chains are often quenched in non-equilibrium conformations that can strongly reduce the EOF over extremely long periods of time. For intermediate adsorption strengths, we observe that the EOF increases as a function of time due to the relaxation of the coating layer. The concentration of polymers in solution and the length of the polymer chains also affect the time-dependence of the EOF. These results show that the quality of electrophoretic separations can depend on the waiting time between the formation of the coating and the beginning of the separation. We conclude by suggesting experimental tests of our predictions.