Proton Conductivity of SPEEK Membranes

Novel sulfonated poly(ether ether ketone) (PEEK) copolymers were prepared using a low-viscosity grade PEEK powder. The TGA studies indicated that SPEEK membranes with up to 75% DS have enough thermal stability. The highest conductivity of 2.176 × 10^?2 S cm^?1 has been observed at 100°C for SP96 (DS = 72%). Compared to Nafion-15, SP72 exhibits much higher conductivity at all the temperatures considered. The water sorption experiments indicated that the maximum water uptake was 3.92% for SP24 and it was 60% for SP120. It was observed that the increase in the water content in a membrane caused a decrease in the diffusion coefficient.     

Effect of Iron Ore Pellet Size on its Properties and Microstructure

The properties of the pellets and their microstructure mainly depend on the raw material mix proportion, raw material chemical composition and the physicochemical conditions like the temperature and oxygen partial pressure within the induration machine. The pelletising plant products are in the size range of 8 to 16 mm. With increasing pellet size, the sintering intensity, thermo‐chemical conditions and formation of different phases vary across its cross section. The time required for varies reactions within the pellet is directly proportional to the pellet size. Because of differences in pellet size, the reduction and oxidation process takes place under different conditions resulting in different phases and microstructures. In this work, detailed studies were carried out on pellets of different size (8 to 16 mm) produced from a 4.2 Mtpa pellet plant for their physical, metallurgical and microstructural properties. It was observed that the pellets in the size range of +8 to ‐12 mm showed good strength and lower RDI. It was observed that the amount of hematite, magnetite, porosity, pore density, pore size and slag phase play a significant role on pellet strength and RDI.     

Hydraulic Conductivity of MSW in Landfills

This paper presents a laboratory investigation of hydraulic conductivity of municipal solid waste (MSW) in landfills and provides a comparative assessment of measured hydraulic conductivity values with those reported in the literature based on laboratory and field studies. A series of laboratory tests was conducted using shredded fresh and landfilled MSW from the Orchard Hills landfill (Illinois, United States) using two different small-scale and large-scale rigid-wall permeameters and a small-scale triaxial permeameter. Fresh waste was collected from the working phase, while the landfilled waste was exhumed from a borehole in a landfill cell subjected to leachate recirculation for approximately 1.5 years. The hydraulic conductivity tests conducted on fresh MSW using small-scale rigid-wall permeameter resulted in a range of hydraulic conductivity 2.8×10?3–11.8×10?3?cm/s with dry unit weight varied in a narrow range between 3.9–5.1?kN/m3. The landfilled MSW tested using the same permeameter produced results between 0.6×10?3–3.0×10?3?cm/s for 4.5–5.5?kN/m3 dry unit weights. The hydraulic conductivity obtained from large-scale rigid-wall permeameter tests decreased with the increase in normal stress for both fresh and landfilled waste. The hydraulic conductivity for fresh MSW ranged from 0.2 cm/s for 4.1?kN/m3 dry unit weight (under zero vertical stress) and then decreased to 4.9×10?5?cm/s for 13.3?kN/m3 dry unit weight (under the maximum applied normal stress of 276 kPa). The hydraulic conductivity of the landfilled MSW decreased from 0.2 cm/s to 7.8×10?5?cm/s when the dry unit weight increased from 3.2 to 9.6?kN/m3. The results clearly demonstrated that the hydraulic conductivity of MSW can be significantly influenced by vertical stress and it is mainly attributed to the increase in density leading to low void ratio. In small-scale triaxial permeameter, when the confining pressure was increased from 69 to 276 kPa the hydraulic conductivity decreased from approximately 10?4?to?10?6?cm/s, which is much lower than those determined from rigid-wall permeameter tests. The published field MSW hydraulic conductivities are found to be higher than the laboratory results. Landfilled MSW possesses lower hydraulic conductivity than fresh MSW due to increased finer particles resulting from degradation. The decreasing hydraulic conductivity with increasing dry unit weight is expressed by an exponential decay function.     

Antioxidant and Antibacterial Effects of Potential Probiotics Isolated from Korean Fermented Foods

A total of sixteen bacterial strains were isolated and identified from the fourteen types of Korean fermented foods that were evaluated for their in vitro probiotic potentials. The results showed the highest survivability for Bacillus sp. compared to Lactobacillus sp. in simulated gastric pH, and it was found to be maximum for B. inaquosorum KNUAS016 (8.25 ± 0.08 log10 CFU/mL) and minimum for L. sakei KNUAS019 (0.8 ± 0.02 log10 CFU/mL) at 3 h of incubation. Furthermore, B. inaquosorum KNUAS016 and L. brevis KNUAS017 also had the highest survival rates of 6.86 ± 0.02 and 5.37 ± 0.01 log10 CFU/mL, respectively, in a simulated intestinal fluid condition at 4 h of incubation. The percentage of autoaggregation at 6 h for L. sakei KNUAS019 (66.55 ± 0.33%), B. tequilensis KNUAS015 (64.56 ± 0.14%), and B. inaquosorum KNUAS016 (61.63 ± 0.19%) was >60%, whereas it was lower for L. brevis KNUAS017 (29.98 ± 0.09%). Additionally, B. subtilis KNUAS003 showed higher coaggregation at 63.84 ± 0.19% while B. proteolyticus KNUAS001 found at 30.02 ± 0.33%. Among them, Lactobacillus sp. showed the best non-hemolytic activity. The highest DPPH and ABTS radical scavenging activity was observed in L. sakei KNUAS019 (58.25% and 71.88%). The cell-free supernatant of Lactobacillus sp. considerably inhibited pathogenic growth, while the cell-free supernatant of Bacillus sp. was moderately inhibited when incubated for 24 h. However, the overall results found that B. subtilis KNUAS003, B. proteolyticus KNUAS012, L. brevis KNUAS017, L. graminis KNUAS018, and L. sakei KNUAS019 were recognized as potential probiotics through different functional and toxicity assessments.     

Impact of activation energy and gyrotactic microorganisms on flow of Casson hybrid nanofluid over a rotating moving disk

Many models of various non-Newtonian fluid flows for different geometries are available for analyzing the mass and heat transfer. Nevertheless, for researchers, it is challenging to choose the most suitable model for a specific geometry. Here, we have adopted a modified Buongiorno model to explore the impact of activation energy on the Casson hybrid nanofluid flow over an upward/downward-moving rotating disk filled with the gyrotactic microorganisms. Moreover, the external magnetic field can establish the magnetic effect, which normalizes the features of heat, mass transfer, and fluid flow. Here, we used silver and copper as nanoparticles suspended in human blood as the carrier fluid. The modeled partial differential equations are converted to ordinary differential equations by opting suitable similarity variables. The numerical solutions of these reduced equations are attained by means of Runge–Kutta–Fehlberg fourth-fifth-order method by adopting a shooting scheme. An investigation of the attained outcomes reveals that the flow field is affected appreciably by the activation energy, bioconvection, and magnetic effect. Peclet and concentration difference numbers diminish the microorganism's profile. A rise in values of the Brownian motion parameter leads to an increase in the rate of heat transfer.     

Catalyst design for maximizing C5+ yields during Fischer-Tropsch synthesis

Fischer-Tropsch (FT) process has great potential to accomplish energy security but also for utilizing greenhouse gases to address the energy problem. Different kinds of feedstocks like coal, biomass (via gasification), CO₂, methane (via reforming), and nonconventional energy sources are used to obtain the syn-gas (CO and H₂). The formation of hydrocarbons in the FT process follows ASF distribution over the majority of the catalysts. It can be overcome by the application of a suitable catalyst, controlling the active metal interaction with the support and interaction of formed hydrocarbon with the support. The ratio of syn-gas is important to maintain the desired conversion and to have more selectivity towards C₅+ products. Increase in the H₂: CO ratios in the feed increases C₅+ products and methane decreases. Whereas with the decrease in the ratios increases undesirable reactions and methane formation. In this article, we have discussed the recent literature from the viewpoint of increasing the C₅+ selectivity. Support has a profound influence on product distribution. With the application of suitable support and controlling the interaction of the active sites yields the good CO conversion with fewer lighters and higher C₅+ hydrocarbons.     

Transient free convective hydromagnetic flow in an infinite vertical cylinder with Hall current and heat source/sink

The analysis of hydromagnetic flow has been a concern of consideration for research scientists and engineers. In this treatise, the unsteady hydromagnetic free convective flow of an incompressible, viscous, and electrically conducting fluid and heat transfer in a vertical cylinder with Hall effects and transverse magnetic field, in the presence of heat source and sink, is studied. Exact solutions of dimensionless unsteady governing equations are obtained by using the Laplace transform technique. Transient fluid velocity and temperature field are depicted by graphs, whereas heat transfer rate, mass flux, and skin-friction are computed in a tabular form for different physical parametric values, such as the source/sink parameter, Hall current parameter, Prandtl number, and Hartmann number. The valuable result from the investigation is that the Hall parameter slightly accelerates the fluid velocity and it provides resistance to the skin friction at the cylindrical surface. Moreover, it is noticeable that temperature as well as velocity enhances and finally gets to its steady state with time. To be noted, the Hall effects have been widely applied in numerous experimental engineering applications, such as constrictions of turbines, Hall accelerators, Hall sensors.     

Effect of Ce3+ Substitution on Sr2+; Structural and Magnetic Properties of Nanocrystalline SrFe12O19 Hexaferrites Prepared by Self-Propagation Method Using Mixed Fuels

Journal of Superconductivity and Novel Magnetism - The nanocrystalline Sr(1?x)CexFe12O19 (x?=?0.00?<?x?<?0.09) strontium M-type hexaferrites...     

A filter based bit allocation scheme for subband compression ofHDTV

The authors compare the subband compression capabilities of eight filter sets (consisting of linear-phase quadrature mirror filters (QMFs), perfect reconstruction filters, and nonlinear phase wavelets) at different bit rates, using-a filter-based bit allocation procedure. Using DPCM and PCM in HDTV subband coding, it is found that QMFs have an edge over the rest.     

Design of band-notched antenna with DG-CEBG

Ultra-wideband (UWB) disc monopole antenna with crescent shaped slot for double band-notched features is presented. Planned antenna discards worldwide interoperability for microwave access (WiMAX) band (3.3–3.6 GHz) and wireless local area network (WLAN) band (5–6 GHz). Defected ground compact electromagnetic band gap (DG-CEBG) designs are used to accomplish band notches in WiMAX and WLAN bands. Defected ground planes are utilised to achieve compactness in electromagnetic band gap (EBG) structures. The proposed WiMAX and WLAN DG-CEBG designs show a compactness of around 46% and 50%, respectively, over mushroom EBG structures. Parametric analyses of DG-CEBG design factors are carried out to control the notched frequencies. Stepwise notch transition from upper to lower frequencies is presented with incremental inductance augmentation. The proposed antenna is made-up on low-cost FR-4 substrate of complete extents as (42 × 50 × 1.6) mm³.Fabricated sample antenna shows excellent consistency in simulated and measured outcomes.