Plant-derived antimicrobials reduce Listeria monocytogenes virulence factors in vitro, and down-regulate expression of virulence genes

Listeria monocytogenes (LM) is a major foodborne pathogen causing septicemia, meningitis and death in humans. LM infection is preceded by its attachment to and invasion of human intestinal epithelium followed by systemic spread. The major virulence factors in LM include motility, hemolysin and lecithinase production. Reducing LM attachment to and invasion of host tissue and production of virulence factors could potentially control listeriosis in humans. This study investigated the efficacy of sub-inhibitory concentrations (SICs, concentrations not inhibiting bacterial growth) of three, generally regarded as safe (GRAS)-status, plant-derived antimicrobial compounds in reducing LM attachment to and invasion of human colon adenocarcinoma (Caco-2) and human brain microvascular endothelial cells (HBMEC). Additionally, the effect of these compounds on the aforementioned LM virulence factors was studied. The compounds and their respective SICs used relative to their MICs were trans-cinnamaldehyde (TC 0.50mM, 0.75mM with the MIC of 0.90mM), carvacrol (CR 0.50mM, 0.65mM with the MIC of 0.75mM), and thymol (TY 0.33mM, 0.50mM with the MIC of 0.60mM). All three-plant antimicrobials reduced LM adhesion to and invasion of Caco-2 and HBMEC (p<0.05). The compounds also decreased LM motility, hemolysin production and lecithinase activity (p<0.05). Real-time PCR data revealed that TC, CR, and TY down-regulated the expression of LM virulence genes by >3.0 folds compared to controls (p<0.05). Results suggest that TC, CR, and TY could potentially be used to control LM infection; however, in vivo studies are necessary to validate these results.     

Classification of Sunflower Oil Blends Stabilized by Oleoresin Rosemary (Rosmarinus officinalis L.) Using Multivariate Kinetic Approach

The sunflower oil–oleoresin rosemary (Rosmarinus officinalis L.) blends (SORB) at 9 different concentrations (200 to 2000 mg/kg), sunflower oil–tertiary butyl hydroquinone (SO_TBHQ) at 200 mg/kg and control (without preservatives) (SO_control) were oxidized using Rancimat (temperature: 100 to 130 °C; airflow rate: 20 L/h). The oxidative stability of blends was expressed using induction period (IP), oil stability index and photochemiluminescence assay. The linear regression models were generated by plotting ln IP with temperature to estimate the shelf life at 20 °C (SL₂₀; R² > 0.90). Principal component analysis (PCA) and hierarchical cluster analysis (HCA) was used to classify the oil blends depending upon the oxidative stability and kinetic parameters. The Arrhenius equation adequately described the temperature‐dependent kinetics (R² > 0.90, P < 0.05) and kinetic parameters viz. activation energies, activation enthalpies, and entropies were calculated in the range of 92.07 to 100.50 kJ/mol, 88.85 to 97.28 kJ/mol, ?33.33 to ?1.13 J/mol K, respectively. Using PCA, a satisfactory discrimination was noted among SORB, SO_TBHQ, and SO_control samples. HCA classified the oil blends into 3 different clusters (I, II, and III) where SORB₁₂₀₀ and SORB₁₅₀₀ were grouped together in close proximity with SO_TBHQ indicating the comparable oxidative stability. The SL₂₀ was estimated to be 3790, 6974, and 4179 h for SO_control, SO_TBHQ, and SORB₁₅₀₀, respectively. The multivariate kinetic approach effectively screened SORB₁₅₀₀ as the best blend conferring the highest oxidative stability to sunflower oil. This approach can be adopted for quick and reliable estimation of the oxidative stability of oil samples.     

Online embedded integrated scanning system for identifying failed fuel sub assemblies in fast reactor

The physical integrity of the fuel in fast reactor is of utmost concern for the healthiness of the reactor and operating people. Hence details of the failed fuel location in the core shall be determined at the earliest, to minimize reactor down time and radiation exposure. In the present reactor under construction, i.e., 500 MWe Prototype Fast Breeder Reactor (PFBR), a system for failed fuel identification, was proposed. The system follows a novel scheme to locate the failed fuel using failed fuel location module along with necessary instrumentation and control. This paper details out the scheme followed.     

A multicenter community study on the efficacy of double-fortified salt

BACKGROUND: Iron and iodine deficiencies affect more than 30% of the world's population. Typical Indian diets contain adequate amounts of iron, but the bioavailability is poor. This serious limiting factor is caused by low intake of meat products rich in heme iron and intake of phytates in staple foods in the Indian diet, which inhibits iron absorption. OBJECTIVE: To test the stability of double-fortified salt (DFS) during storage and to assess its efficacy in improving the iron and iodine status of the communities. METHODS: The stability of both iodized salt and DFS during storage for a 2-year period was determined. The bioefficacy of DFS was assessed in communities covering three states of the country for a period of 1 year. This was a multicenter, single-blind trial covering seven clusters. The experimental group used DFS and the control group used iodized salt. The salts were used in all meals prepared for family members, but determination of hemoglobin by the cyanmethemoglobin method was performed in only two or three members per family, and not in children under 10 years of age (n = 393 and 436 in the experimental and control groups, respectively). The family size was usually four or five, with a male: female ratio of 1:1, consisting of two parents with two or three children. Hemoglobin was measured at baseline, 6 months (midpoint), and 12 months (endpoint). Urinary iodine was measured in only one cluster at baseline and endpoint. All the participants were dewormed at baseline, 6 months, and 12 months. RESULTS: The iron and iodine in the DFS were stable during storage for 2 years. Over a period of 1 year, there was an increase of 1.98 g/dL of hemoglobin in the experimental group and 0.77 g/dL of hemoglobin in the control group; the latter increase may have been due to deworming. The median urinary iodine changed from 200 microg/dL at baseline to 205 microg/dL at the end of the study in the experimental group and from 225 microg/dL to 220 microg/dL in the control group. There was a statistically significant (p < .05) improvement in the median urinary iodine status of subjects who were iodine deficient (urinary iodine < 100 microg/L) in both the experimental and the control groups, a result showing that DFS was as efficient as iodized salt in increasing urinary iodine from a deficient to sufficient status. There was a statistically significant increase (p < .05) in hemoglobin in all seven clusters in the experimental group compared with the control. CONCLUSIONS: The iron and iodine in the DFS are stable in storage for 2 years. The DFS has proved beneficial in the delivery of bioavailable iron and iodine.     

Dielectric relaxation, conductivity behaviour and magnetic properties of Mg substituted Ni-Li ferrites

The dielectric properties of Mg substituted Ni-Li spinel ferrites synthesized by sol-gel auto combustion process have been studied using impedance measurements in the frequency range from 10 Hz to 10 MHz and in the temperature range from 310 K to 473 K. The effect of frequency, temperature and composition on dielectric constant (?′), dielectric loss (tan δ) and conductivity (σ) has been discussed in terms of hopping of charge carriers between Fe²⁺ and Fe³⁺ ions. The electrical modulus formulism has been employed to study the relaxation dynamics of charge carriers and the results indicate the presence of non-Debye type of relaxation in the present ferrites. Similar values of activation energies for dc conduction (E_dc) and for conductivity relaxation (E_M″) reveal that the mechanisms of electrical conduction and dielectric polarization are same in these ferrites. A single ‘master curve’ for normalized plots of all the modulus isotherms observed for a given composition indicates the temperature independence of dynamical process for charge carriers. The saturation magnetization and coercivity have been calculated from the hysteresis loop measurements and show striking dependence on the composition.     

Viscometric and Wear Performance of Methacrylate-based Lubricants

Methacrylate based lube oil additive of three different kinds viz, one homopolymer (polyhexadecyl methacrylate [PHDMA]) and two of its copolymers (HDMA-1-decene and HDMA-styrene) have been synthesized, characterized and investigated for their viscosity modifier (VM), antiwear (AW), and thickening performance at different concentrations in two different base oils. The VM properties in terms of viscosity index (VI), the AW properties through determination of wear scar diameter (WSD) using a four ball wear tester and thickening (i.e., rise in oil viscosity due to added polymer at a given polymer concentration was studied). The polymers studied have been found to show VM and AW properties under the experimental conditions. At a given polymer concentration thickening was found to increase in the order PHDMA-styrene > PHDMA-1-decene > PHDMA. The intrinsic viscosity, a measure of polymers hydrodynamic volume, showed a higher value in lower viscosity base stock, as compared to the higher viscosity oil in the case of homopolymer and PHDMA-1-decene copolymers. The decrease in viscosity with temperature followed the order PHDMA > PHDMA-1-decene > PHDMA-styrene; indicating a better viscosity index for the styrene copolymer (PHDMA-styrene).     

Nitro Derivatives of 1,3,5-Triazepine as Potential High-Energy Materials

Structure optimization and frequency calculation of six nitro derivatives of 1,3,5-triazepine were performed using a MP2(FULL)/6-311G(d,p) method. In order to obtain reliable energy data, single-point energy and subsequently thermodynamic properties of the species considered were calculated at a fairly high level of theory, CCSD(T)/6-311G(d,p). Solid-phase heats of formation and crystal density were determined using an electrostatic potential (ESP) method utilizing wave function analysis-surface analysis suite (WFA-SAS) code. The result shows that all nitro derivatives possess high positive heats of formation that increase with an increase in the number of nitro groups attached to the ring moiety. The crystal density was found to be in the range of 1.67–1.90 g/cm³. Detonation properties of the compounds were estimated using the Kamlet-Jacobs equation. The results showed that detonation velocity (D) and detonation pressure (P) increased with an increase in the number of nitro groups attached at the ring moiety. It was found that all six nitro derivatives of the title compound had better or comparable performance characteristics than the most widely used commercial explosives, such as TNT, research and development explosives (RDX), and 1,3,5,7-tetranitro-1,3,5,7-tetrazocane (HMX). The trinitro derivative (1,3,5-trinitro-1,3,5-triazepine, F) yielded detonation pressure (P) and detonation velocity (D) of 45.5 GPa and 9.23 km/s, respectively, at a loading density of 1.90 g/cm³, which are superior to the most powerful available explosive HMX (P = 39.00 GPa and D = 9.11 km/s). The results obtained during the present study show that the title compounds can be used as promising futuristic high-energy-density materials (HEDMs).     

Evaluating the fabric performance and antibacterial properties of 3-D piezoelectric spacer fabric

The increasing need of on-demand power for enabling portable low-power devices and sensors has necessitated work in novel energy harvesting materials and devices. In a recent work, we demonstrated the production and suitability of three-dimensional (3-D) spacer all fibre piezoelectric textiles for converting mechanical energy into electrical energy for wearable and technical applications. The current work investigates the textile performance properties of these 3-D piezoelectric fabrics including porosity, air permeability, water vapour transmission and bursting strength. Furthermore, as these textiles are intended for wearable applications, we have assessed their wear abrasion and consequently provide surface resistance measurements which can affect the lifetime and efficiency of charge collection in the piezoelectric textile structures. The results show that the novel smart fabric with a measured porosity of 68% had good air (1855 l/m²/s) and water vapour permeability (1.34 g/m²/day) values, good wear abrasion resistance over 60,000 rotations applied by a load of 12 kPa and bursting strength higher than 2400 kPa. Moreover, the antibacterial activity of 3-D piezoelectric fabrics revealed that owing to the use of Ag/PA66 yarns, the textiles exhibit excellent antibacterial activity against not only Gram-negative bacteria E. coli but they are also capable of killing antibiotic methicillin-resistant bacteria S. aureus.     

Solid Particle Erosion Behavior of WC-CoCr Nanostructured Coating

In the present study, solid particle erosion resistance of high-velocity oxy-fuel (HVOF)-sprayed WC-CoCr coatings was evaluated. Erosion testing was conducted using alumina (Al₂O₃) powder as the erodent with three different impact angles (30, 60, and 90°) and impact velocity was kept constant. The coatings were deposited using two different powders; one was composed of conventional WC particles and second one contained nanoscale particles mixed with CoCr binder material. Erosion testing was carried out at room temperature using an air-jet erosion test setup. The effect of varying impact angles was studied and discussed with the help of scanning electron microscopy images of worn surfaces of coatings. The results showed that coating properties like microhardness and fracture toughness have a strong influence on the erosion behavior. During erosion testing, material was removed by fracturing and pullout of WC grains from the binder matrix. The morphology of the eroded surface also showed cutting, lip, and groove formation in the binder matrix caused by the repetitive impacts of erodent particles. It was observed that coating with nano-WC grains exhibited higher erosion resistance compared to conventional coating.