Development of a heart monitoring system with high-Tc DC-SQUID gradiometers

We investigated different types of high-T_c DC-SQUID gradiometers with the aim to develop an one-channel heart monitoring system for non-invasive measurements in unshielded environment. This system could be used to obtain information about the patients condition in serial examinations and in emergency cases fast and stable. Step-edge and bicrystal Josephson junctions were used to prepare planar galvanically coupled thin film gradiometers and magnetometers. These sensors were used to carry out measurements in well-shielded and non-shielded environment and we compared the different noise properties and field gradient resolutions. With different types and sizes of high-T_c DC-SQUID sensors magnetocardiograms were measured in a magnetically shielded room. The influence of antenna configurations, SQUID parameters, and cooling conditions on the measurement of magnetocardiograms will be discussed. We investigated possibilities to suppress the earth magnetic field (with pairs of Helmholtz coils) and for noise field compensation in unshielded environment.     

Analysis of lipid classes by solid-phase extraction and high-performance size-exclusion chromatography

An improved method to analyze lipid classes of edible oils and fats by solid-phase extraction (SPE) and high-performance size-exclusion chromatography (HPSEC) is presented. A mixture of lipid standards was fractionated by the solid-phase extraction procedure (NH₂ phase) into polar and nonpolar fractions; these were then submitted to analysis by HPSEC. The size-exclusion chromatographic columns were three styrene/divinylbenzene columns with pore sizes of 100 Å and 50 Å. Light-scattering was used for the detection system, and the parameters of the detector were optimized to minimize the difference between the responses of the compounds studied. With this procedure it was possible to separate the following lipid classes: triacylglycerols, diacylglycerols, monoacylglycerols and free fatty acids, sterols, sterol esters, tocopherols and carotenoids. Quantitative analysis was studied for a light-scattering detector with several lipid standards of different molecular weights and unsaturation levels.     

Space-time finite elements for a simplified thermo-metallurgical problem relevant to casting

The non-linear thermo-metallurgical problem, relevant for the cooling of a molten metal including the macro-segregation that occurs during the cooling process, is studied here. Due to the strong non-linearities involved in phase transformations, it is necessary to use a fine resolution in space-time in a finite element approximation in order to meet accuracy requirements. We derive space-time FE-methods based on the discontinuous and continuous Galerkin method in time for the energy equation. This formulation integrates the stored energy exactly for a given heat flux. When macro-segregation is incorporated into the model, the problem can be formulated in such a way that the phase-transition drives a flow of species. In addition, diffusion is possible throughout the domain. The model can be further rewritten using a potential approach. By this approach for modelling macro-segregation, we are able to obtain discretizations that guarantee that the balance equations are satisfied, and it is possible to solve the phase-transition problem either as a field problem or as a local problem (defined by a local evolution rule).     

Rapid thermal chemical vapor deposition of in-situ boron doped polycrystalline SIxGe1-x

In-situ doped polycrystalline Si_xGe_1-x (x = 0.7) alloys were deposited by rapid thermal chemical vapor deposition (RTCVD) using the reactive gases SiH₂Cl₂, GeH₄ and B₂H₆ in a H₂ carrier gas. The depositions were performed at a total pressure of 4.0 Torr and at temperatures 600° C, 650° C and 700° C and different B₂H₆ flow rates. The conditions were chosen to achieve high doping levels in the deposited films. Our results indicate negligible effect of B₂H₆ flow on the deposition rate. The depositions follow an Arrhenius type behavior with an activation energy of 25 kcal/mole. Boron incorporation in the films was found to follow a simple kinetic model with higher boron levels at lower deposition rates and higher B₂H₆ flow rates. As-deposited resistivities as low as 2 mΩ-cm were obtained. Rapid thermal annealing (RTA) in the temperature range 800-1000° C was found to reduce the resistivity only marginally due to the high levels of boron activation achieved during the deposition process. The results indicate that polycrystalline Si_xGe_1-x films can be deposited by RTCVD with resistivities comparable to those reported for in-situ doped polysilicon.     

Vergleich der Extrakte und des Lignins aus frischem und gelagertem Kiefernholz (Pinus sylvestris L.)

The degradation processes of the extractives of pine wood caused by aging are only noticeable in the heartwood. In seasoned sapwood the percentages of the water extracts and the cyclohexane-ethanol extract increase compared with the green sample; the alkali extracts, however, do not vary. The contents of acid lignin as well as the UV and IR spectra of MWL do not show differences. The amount of OCH₃/C₉ is in all samples 0.96, but the degree of oxidation is higher in the seasoned wood than in the green one.     

Computer-aided design in mechanisms

The man-machine dialog is very important for the design process. In this paper a program system, based on the minicomputer KRS 4201 (ROBOTRON), is demonstrated by using an interactive graphical screen. This program system provides the opportunity to analyze and synthesize mechanisms up to 16 links. The application is demonstrated by designing a front-loader-system for a truck. Real-time animation of seven-bar linkages and coupler curves, including velocity and acceleration, are shown.     

Structured document storage and refined declarative and navigational access mechanisms in HyperStorM

The combination of SGML and database technology allows to refine both declarative and navigational access mechanisms for structured document collection: with regard to declarative access, the user can formulate complex information needs without knowing a query language, the respective document type definition (DTD) or the underlying modelling. Navigational access is eased by hyperlink-rendition mechanisms going beyond plain link-integrity checking. With our approach, the database-internal representation of documents is configurable. It allows for an efficient implementation of operations, because DTD knowledge is not needed for document structure recognition. We show how the number of method invocations and the cost of parsing can be significantly reduced. Edited by Y.C. Tay. Received April 22, 1996 / Accepted March 16, 1997     

Initial Stages in the Metal-dusting Process on Alloy 800

The initial stages of the metal-dusting process on Alloy 800 at 620 °C were investigated by light optical microscopy, RAMAN spectroscopy, atomic-force microscopy, Auger electron spectroscopy, transmission-electron microscopy and electron back-scatter diffraction. As it turned out the incubation period for metal-dusting is characterized by simultaneous formation of a heterogeneously growing oxide scale and deposition of carbon. The material surface shows different tarnish colors depending on the substrate-grain orientation with different susceptibility to the beginning of metal-dusting attack. “Low-index” grains were not attacked within the times investigated while the other grain orientations showed pitting. Carbon is evidently incorporated into the oxide scale from the very beginning of exposure with different intensities depending on the underlying substrate-grain orientation leading to differences in the tarnish colors. As a consequence carbides are formed even underneath “dense” oxide layers. Evidently metal-dusting attack starts at positions of the oxide scale where “higher carbon concentrations” are present.     

Conditional associative learning is impaired in cerebellar disease in humans.

Eight patients with lesions restricted to the cerebellum were compared with a total of 25 age-matched controls on an reaction time (RT) task allowing the recording of simple and choice RTs as well as RTs to abstract visual patterns signifying the particular movement to be performed. In all conditions the actual movements required (either a left or a right button press) remained the same, but the cognitive requirements of the task varied. In the abstract patterns condition, the significance of the various patterns with regard to the required movement had to be learned by the Ss. The patients with cerebellar lesions were particularly impaired in this condition. It is concluded that the cerebellum is involved not just in the timing of movements but also in the decision process as to which movement should be performed under particular circumstances. (PsycINFO Database Record (c) 2010 APA, all rights reserved)