Simulating Ramsey-Type Fringes in a Pulsed Microwave-Driven Classical Josephson Junction

We present evidence for a close analogy between the nonlinear behaviour of a pulsed microwave-driven Josephson junction at low temperature and the experimentally observed behaviour of Josephson systems operated below the quantum transition temperature under similar conditions. We specifically address observations of Ramsey-type fringe oscillations, which can be understood in classical nonlinear dynamics as results of slow transient oscillations in a pulsed microwave environment. Simulations are conducted to mimic experimental measurements by recording the statistics of microwave-induced escape events from the anharmonic potential well of a zero-voltage state. Observations consistent with experimentally obtained Ramsey-type oscillations are found in the classical model. An erratum to this article can be found at     

The microbiology of mixed salad containing raw and cooked ingredients without dressing

Growth of aerobic mesophilic bacteria in mixed salad without dressing, containing cooked sweet corn and raw endive, was similar to that of raw endive alone. At 9°C, sweet corn permitted the growth of the lactic acid bacterium Leuconostoc mesenteroides , whenever the bacterium was present on raw endive, whereas no growth of lactic acid bacteria was recorded on raw endive alone. Listeria monocytogenes , artificially inoculated in the samples, grew more in the mixed salad than in the raw endive alone, for products stored at 6°C and 9°C. Acidification of sweet corn to pH 5.0 was proposed to reduce the development of L. monocytogenes in the mixed salad to a level similar to that recorded in the raw endive alone. Acidification with citric acid reduced spoilage of sweet corn, whereas acetic acid caused necrosis on the leaves of raw endive.     

Structure discovery in medical databases: a conceptual clustering approach

Clustering is an important data analysis tool for discovering structure in data sets. Although research on conceptual clustering has produced algorithms showing significant advantages over earlier numerical ones, existing methods still present some limitations regarding applicability to biomedical domains. In this paper we describe ADAGIO, a conceptual clustering algorithm combining a low-cost preordering process with a breadth-first incremental control strategy that incorporates merging and splitting operators. Experimental evaluation indicated that the algorithm achieves a good balance between structure discovery performance and computational efficiency, and demonstrated the comparative effectiveness of its missing information handling process. ADAGIO is able to handle qualitative, quantitative and mixed-type data. An application example to a cancer domain is given, where the algorithm was able to suggest interesting epidemiological interpretations.     

A multi-objective approach for the motion planning of redundant manipulators

Kinematic redundancy occurs when a manipulator possesses more degrees of freedom than those required to execute a given task. Several kinematic techniques for redundant manipulators control the gripper through the pseudo-inverse of the Jacobian, but lead to a kind of chaotic inner motion with unpredictable arm configurations. Such algorithms are not easy to adapt to optimization schemes and, moreover, often there are multiple optimization objectives that can conflict between them. Unlike single optimization, where one attempts to find the best solution, in multi-objective optimization there is no single solution that is optimum with respect to all indices. Therefore, trajectory planning of redundant robots remains an important area of research and more efficient optimization algorithms are needed. This paper presents a new technique to solve the inverse kinematics of redundant manipulators, using a multi-objective genetic algorithm. This scheme combines the closed-loop pseudo-inverse method with a multi-objective genetic algorithm to control the joint positions. Simulations for manipulators with three or four rotational joints, considering the optimization of two objectives in a workspace without and with obstacles are developed. The results reveal that it is possible to choose several solutions from the Pareto optimal front according to the importance of each individual objective.     

A random dipole model for spontaneous brain activity

The statistical properties of the EEG and the MEG are described mathematically as the result of randomly distributed dipoles. These dipoles represent the interactions of cortical neurons. For certain dipole distributions, the first- and second-order moments of the electric and magnetic fields are derived analytically. If the dipoles are in a spherical volume conductor and have no preference for any direction, the variance of a differentially measured EEG-signal is only a function of the electrode distance. In this paper, the theoretically derived variance function will be compared with EEG- and MEG-measurements. It is shown that a dipole with a fixed position and a randomly fluctuating amplitude is an adequate model for the alpha-rhythm. An expression for the covariance between the magnetic field and a differentially measured EEG-signal is derived. This covariance is considered as a function of the magnetometer position, and is compared with the measurements of Chapman et al. [23]. The theory can be used to obtain a (spatial) covariance matrix of the background noise, which occurs in evoked potential measurements. Such a covariance matrix can be used to obtain a maximum likelihood estimator of the dipole parameters in evoked potential studies, to evaluate the merits of the so-called "Laplacian derivation," and for the interpolation of electromagnetic data.     

Secondary Metabolic Profile as a Tool for Distinction and Characterization of Cultivars of Black Pepper (Piper nigrum L.) Cultivated in Pará State,Brazil

This study evaluated the chemical compositions of the leaves and fruits of eight black pepper cultivars cultivated in Pará State (Amazon, Brazil). Hydrodistillation and gas chromatography–mass spectrometry were employed to extract and analyze the volatile compounds, respectively. Sesquiterpene hydrocarbons were predominant (58.5–90.9%) in the cultivars “Cingapura”, “Equador”, “Guajarina”, “Iaçará”, and “Kottanadan”, and “Bragantina”, “Clonada”, and “Uthirankota” displayed oxygenated sesquiterpenoids (50.6–75.0%). The multivariate statistical analysis applied using volatile composition grouped the samples into four groups: γ-Elemene, curzerene, and δ-elemene (“Equador”/“Guajarina”, I); δ-elemene (“Iaçará”/“Kottanadan”/“Cingapura”, II); elemol (“Clonada”/“Uthirankota”, III) and α-muurolol, bicyclogermacrene, and cubebol (“Bragantina”, IV). The major compounds in all fruit samples were monoterpene hydrocarbons such as α-pinene, β-pinene, and limonene. Among the cultivar leaves, phenolics content (44.75–140.53 mg GAE·g⁻¹ FW), the enzymatic activity of phenylalanine-ammonia lyase (20.19–57.22 µU·mL⁻¹), and carotenoids (0.21–2.31 µg·mL⁻¹) displayed significant variations. Due to black pepper’s susceptibility to Fusarium infection, a molecular docking analysis was carried out on Fusarium protein targets using each cultivar’s volatile components. F. oxysporum endoglucanase was identified as the preferential protein target of the compounds. These results can be used to identify chemical markers related to the susceptibility degree of black pepper cultivars to plant diseases prevalent in Pará State.     

基于小波的实时烟雾检测*

传统的离子式、吸气式、光电式等烟雾检测器在大空间中检测烟雾时,会受到发射信号与接收信号之间的距离、平面角度、精确对准等限制,无法对整个空间的烟雾状况进行描述.新的方法通过监测区域的摄像机拍摄的视频图像序列,进行小波变换,分析图像帧在时域和空域的频率特性,来确定被监测区域是否有火灾烟雾的发生.实验证明该方法不受空间高度、热障、易爆、有毒等环境的限制,并且有灵敏度高、抗干扰力强、适用范围广等特点.     

Stress relaxation behavior of Ti-6Al-4V alloy

1　INTRODUCTIONTi 6Al 4VisoneofthemostimportantTial loys[1,2 ] .Butthisalloyhasbadformabilityforitshighelasticresilience .Therefore ,hotsizingisimpor tant[36 ] .Asthebaseofhotsizing ,thestudyofstressrelaxationhasimportanttheoreticalvalueandpracticalsignificance .Ontheotherhand ,Ti 6Al 4Visusedasfastenermaterialssometimes .Whenthefastenersworkatthetemperaturehigherthanroomtemperature ,stressrelaxationmayresultsinacci dents .Sohowtopreventthestressrelaxationisveryimportant[7] .Uptonow ,…     

Hydrogen-helium scattering cross-sections for transmission elastic recoil detection analysis

¹H(,p) ⁴He scattering cross-sections were determined for the 6.5–13 MeV (incident energy) range, thereby extending the energy range for such data beyond that available in the literature. These values are essential for the further development of hydrogen concentration profiling by the transmission elastic recoil detection technique, of particular interest in the design of surface-engineered hydrogen contamination barriers for steels.     

Biomimetic Polymer Nanostructures by Injection Molding

The nanometer scale topography of self‐assembling structural protein complexes in animals is believed to induce favorable cell responses. An important example of such nanostructured biological complexes is fibrillar collagen that possesses a cross‐striation structure with a periodicity of 69 nm and a peak‐to‐valley distance of 4–6 nm. Bovine collagen type I was assembled into fibrillar structures in vitro and sedimented onto solid supports. Their structural motif was transferred into a nickel replica by physical vapor deposition of a small‐grained metal layer followed by galvanic plating. The resulting inverted nickel structure was found to faithfully present most of the micrometer and nanometer scale topography of the biological original. This nickel replica was used as a die for the injection molding of a range of different thermoplastic polymers. Total injection molding cycle times were in the range of 30–45 seconds. One of the polymer materials investigated, polyethylene, displayed poor replication of the biological nanotopographical motif. However, the majority of the polymers showed very high replication fidelity as witnessed by their ability to replicate the cross‐striation features of less than 5 nm height difference. The latter group of materials includes poly(propylene), poly(methyl methacrylate), poly(L ‐lactic acid), polycaprolactone, and a copolymer of cyclic and linear olefins (COC). This work suggests that the current limiting factor for the injection molding of nanometer scale topography in thermoplastic polymers lies with the grain size of the initial metal coating of the mold rather than the polymers themselves.