Thermal Expansion of Alkaline‐Doped Lanthanum Ferrite Near the Néel Temperature

The thermal expansion and magnetic behaviors of divalent, alkaline‐doped lanthanum ferrites (La_0.9M_0.1FeO₃, M=Ca, Sr, Ba) were assessed using a combination of dilatometry, magnetometry, time‐of‐flight neutron diffraction, and high‐temperature X‐ray diffraction. Néel temperatures were determined through vibrating sample magnetometry and correlated well with changes in thermal expansion behavior observed during both dilatometry and X‐ray diffraction. The Néel temperatures observed for pure, Ca‐doped, Sr‐doped, and Ba‐doped lanthanum ferrites were 471°C, 351°C, 465°C, and 466°C, respectively. The effect of divalent substitutions on the magnetic behavior are attributed to charge compensation mechanisms and structural changes in the material.     

Tuning the Electronic Structure of Graphene through Collective Electrostatic Effects

Electrostatically designing materials opens a new avenue for realizing systems with user‐defined electronic properties. Here, an approach is presented for efficiently patterning the electronic structure of layered systems such as graphene by means of collective electrostatic effects. Using density‐functional theory simulations, it is found that lines of polar elements can strongly modify the energy landscape of this prototypical 2D material. This results in a confinement of electronic states in specific regions of the sample and, consequently, in a local energetic shift of the density of states. The latter is also directly reflected in the details of the band structure of the electrostatically patterned sample. Finally, it is shown that the approach can also be successfully applied to other 2D materials such as hexagonal boron nitride, where the effects are predicted to be even more pronounced than in graphene.     

Learning curve analysis of concentrated photovoltaic systems

Price declines and volume growth of concentrated photovoltaic (CPV) systems are analysed using the learning curve methodology and compared with other forms of solar electricity generation. Logarithmic regression analysis determines a learning rate of 18% for CPV systems with 90% confidence of that rate being between 14 and 22%, which is higher than the learning rates of other solar generation systems (11% for CSP and 12 to 14% for PV). Current CPV system prices are competitive with PV and CSP, which, when combined with the higher learning rate, indicates that CPV is likely to further improve its marketability. A target price of 1 $/W in 2020 could be achieved with a compound growth rate of 67% for the total deployed volume between 2014 and 2020, which would realize a cumulative deployed volume of 7900 MW. Other projections of deployment volumes from commercial sources are converted using the learning rate into future price scenarios, resulting in predicted prices in the range of 1.1 to 1.3 $/W in 2020. © 2014 The Authors. Progress in Photovoltaics: Research and Applications published by John Wiley & Sons Ltd.     

Effects of various ester groups in γ-radiation degradation of syndiotactic poly(methacrylate)s

The γ irradiation of poly(methacrylate)s with various ester groups at room temperature was investigated by gel permeation chromatography and NMR techniques. The G values for scission and crosslinking for each of the polymers were estimated from the changes in the molecular weights and molecular weight distributions. The new structures formed during γ irradiation were examined by ¹H-NMR spectroscopy. All of the investigated poly(alkanemethacrylate)s were found to produce the alkane formates during γ irradiation, and for poly(2-methyl heptyl methacrylate) G(S) was less than 4G(X), indicating gel formation in this polymer. In the investigation of poly(benzyl methacrylate), no formate ester was found, but some small molecule compounds formed from the benzyl radical were detected. The benzyl group was also found to stabilize the polymer against radiation damage. © 1996 John Wiley & Sons, Inc.     

The Influence of Ethanol on the Foaming Properties of Beer Protein Fractions: A Comparison of Rudin and Microconductivity Methods of Foam Assessment

The effect of ethanol on the foaming properties of beer protein fractions was studied using a microconductivity method and nitrogen gas to generate the foam. Increasing the ethanol concentration resulted in a decrease in foam stability. Interfacial studies including thin film drainage and dilational elasticity measurements indicated that ethanol reduced the rigidity of the adsorbed protein layer resulting in accelerated drainage from the foam lamellae and increased probability of film rupture. These results conflict with data from the Rudin method (using nitrogen gas to generate the foam) which indicate that, at low concentration, ethanol improves foam stability. These apparently conflicting results may be explained by the foam positive effects of a decline in bubble size and increase in bulk viscosity observed for the Rudin method, contrasted with the negative influence of a reduction in surface viscosity observed for the microconductivity foam assessment method.     

Mutational analysis of the gene for Schizosaccharomyces pombe RNase MRP RNA,mrp1, using plasmid shuffle by counterselection on canavanine

Reverse genetics in fission yeast is hindered by the lack of a versatile established plasmid shuffle system. In order to screen efficiently and accurately through plasmid-borne mutations in the essential gene for the RNA component of RNase MRP, mrp1, we have developed a system for plasmid shuffling in fission yeast using counterselection on canavanine. The system takes advantage of the ability of the Saccharomyces cerevisiae CAN1 gene to complement a Schizosaccharomyces pombe can1-1 mutation. Two general use plasmids were constructed that allow directional cloning and initial selection for histidine before counterselection by canavanine. The strain constructed for plasmid shuffling carries auxotrophic markers for ade6, leu1, ura4 and his3 along with the can1-1 mutation. Using this system we examined several partial deletions and point mutations in conserved nucleotides of Schizosaccharomyces pombe RNase MRP RNA for their ability to complement a chromosomal deletion of the mrp1 gene. The degree of background canavanine resistance as well as plasmid–plasmid recombination encountered in these experiments was sufficiently low to suggest that the system we have set up for counterselection by canavanine in fission yeast using multicopy plasmids will be widely useful.     

Effect of cure temperature on the structure and water absorption of epoxy/amine thermosets

Dielectric and rheological measurements are reported on the effect of cure temperature on the water absorption of tris[(2,3-epoxypropoxy)phenyl] methane cured with a 1 : 1 stoichiometric ratio of 4,4′-diaminodiphenylsulphone. Analysis of the water absorption characteristics of these materials using a combination of dielectric and gravimetric measurements has indicated that water molecules can be found in two distinctly different types of environments. There are water molecules which are strongly interacting with polar groups and water molecules clustered together into sub-micro-scale cavities within the matrix structure. Changes in the final cure temperature have the effect of changing both the extent and distribution of the types of water molecules present in the matrix. Validation of the diffusion coefficients obtained from the dielectric analysis is based on a comparison with gravimetric data and the implications are discussed. Differences observed between these two different types of measurement are related to peculiarity in the dielectric method and its extreme sensitivity to interfacial phenomena.     

Effect of lubricating oil contamination on evaporation in refrigerants R12 and R22

An investigation has been made into the effect of oil concentration on evaporation heat transfer coefficients in refrigerant-oil mixtures flowing in a horizontal tube. A new correlation is presented for heat transfer coefficients in convective evaporation of refrigerant-oil mixtures that predicts the results of the present study within approximately ±20%. The paper reports measurements of evaporation heat transfer coefficients in refrigerants R12 and R22, both oil-free and with two concentrations of Shell Clavus 32 oil. A 1·8 m long ⅜ in O/D copper tube (8·05 mm I/D) was used, at evaporation temperatures of −5°C, 0°C and +5°C. Heat flux and mixture mass velocity were kept constant at 2500 W m⁻² and 155 kg m⁻² s⁻¹, respectively, and measured coefficients were in the range of 1400 to 3900 W m⁻² K⁻¹. The results showed that, for a complete evaporator, 2% oil may be expected to increase the heat transfer coefficient by 12%, but 10% oil returns the coefficient to oil-free values.