Sulfur in wheat gluten: In situ analysis by X-ray absorption near edge structure (XANES) spectroscopy

The sulfur containing gluten proteins largely determine the baking quality of wheat. In order to probe the speciation of sulfur, gluten proteins [gliadin, high molecular weight (HMW) and low molecular weight (LMW) subunits of glutenin], stored glutenin subunits as well as flour were investigated in situ by S K-edge X-ray near edge absorption structure (XANES) spectroscopy. The spectra confirmed the existence of disulfide bonds in oxidised (oxygen stream) glutenin subunits, supporting their significance for the formation of gluten networks. Additionally, glutenin subunits, which were stored under ambient air and temperature conditions, predominantly contained sulfur of higher oxidation states (sulfoxide, sulfonic acid). The disulfide state and also sulfoxide and sulfonic acid states were detected after reoxidation of glutenin subunits with potassium bromate.     

Mechanisms and Kinetics of Liquid Silicon Oxidation During Industrial Refining

During oxidative ladle refining (OLR) of silicon, the metal surface is partly oxidized, resulting in the formation of a condensed silica fume (SiO₂). This fugitive emission of silica represents a potential health hazard to the workers in the silicon and ferrosilicon industry. In the current work, industrial measurement campaigns aimed at recording the fume generation during OLR were performed at the Elkem Salten plant in Norway. The measured amounts of silica produced were 2.5–5.1?kg/h, depending on the gas flow rate in the refining process. The rate of silica production correlates with the total flow rate and amount of air in the purge gas, and increases as the flow rate increases. The results of this work suggest that fume generation during OLR primarily results from oxidation of the exposed metal surface, with oxygen transport from the surrounding atmosphere to the metal surface being the limiting factor. Other identified mechanisms of SiO₂ formation were splashing of the metal and/or oxidation of SiO gas carried with the refining purge gas.     

Investigation on PEM water electrolysis cell design and components for a HyCon solar hydrogen generator

Hydrogen as a secondary energy carrier promises a large potential as a long term storage for fluctuating renewable energies. In this sense a highly efficient solar hydrogen generation is of great interest especially in southern countries having high solar irradiation. The patented Hydrogen Concentrator (HyCon) concept yields high efficiencies combining multi-junction solar cells with proton exchange (PEM) membrane water electrolysis. In this work, a special PEM electrolysis cell for the HyCon concept was developed and investigated. It is shown that the purpose-made PEM cell shows a high performance using a titanium hybrid fiber sinter function both as a porous transport layer and flow field. The electrolysis cell shows a high performance with 1.83 V at 1 A/cm² and 24 °C working under natural convection with a commercially available catalyst coated membrane. A theoretical examination predicts a total efficiency for the HyCon module from sunlight to hydrogen of approximately 19.5% according to the higher heating value.     

Laboratory-scale liquefiers for natural gas: A design and assessment study

Exact knowledge of natural gas composition is essential in custody transfer to determine the energy content of the delivery. However, for liquefied natural gas (LNG), a reliable composition determination is difficult. Here, we describe the design of a laboratory-scale reference liquefier that enables the validation and calibration of optical spectroscopy sensors by providing them with a sample of metrologically traceable composition. Hence, it is crucial to avoid fractionation of the sample during liquefaction. This is realized by supercritical liquefaction of a reference gas mixture in conjunction with a special vapor–liquid-equilibrium (VLE) cell. As this is a demanding high-pressure application, low-pressure condensation as liquefaction method was also assessed. Through experimental investigations and VLE calculations, preservation of the composition of the produced liquid sample during condensation was studied. We conclude that under optimized conditions, validation, and calibration measurements of optical sensors can be performed on condensed liquids, which, however, needs further confirmation.     

On higher structures

In this paper, we discuss various philosophical aspects of the hyperstructure concept extending networks and higher categories. By this discussion, we hope to pave the way for applications and further developments of the mathematical theory of hyperstructures.     

A simple frequency‐domain method for stress analysis of stall‐regulated wind turbines

A simple method, based in the frequency domain, was developed for calculating the dynamic response of a stall‐regulated wind turbine. Emphasis is placed on two aspects of the method, which are necessary in order to obtain a reasonable linearization of behavior when the blades are stalled. First, the tangential (in‐plane) component of turbulence is included, in addition to the axial component. Second, the linearized relationship between lift coefficient and angle‐of‐attack is adjusted to account for the effects of dynamic stall: separate linearizations are used for excitation and damping of vibration. A thorough comparison is made between linear and non‐linear dynamic‐stall methods, with the conclusion that the accuracy of the linear method depends upon the frequency and amplitude of oscillation. The linear dynamic‐stall method is accurate at blade vibrational frequencies, but it can be inaccurate at frequencies in the vicinity of 1P or below, when the angle‐of‐attack oscillates with an amplitude of 3° or more. Load spectra of a Nordtank 500 turbine, calculated using the frequency‐domain method, are compared with measurements. The frequency‐domain method provides estimates of load spectra and aerodynamic damping (stability) that are useful for preliminary design and optimization, but the method lacks sufficient accuracy and generality to be used for certification. Copyright © 2011 John Wiley & Sons, Ltd.     

Enhancement in crystallinity of poly(3-hexylthiophene) thin films prepared by low-temperature drop casting

Low-temperature casting of high molecular weight (HMW > 40 kDa) regioregular poly(3-hexylthiophene) (P3HT) is demonstrated to yield highly crystalline P3HT thin films with well defined and preferentially edge-on oriented [(100) contact plane] nanocrystallites on the pure and silanized Si/SiO₂ substrates. Transmission electron microscopy and X-ray diffraction provide evidence for the increase in preferential edge-on orientation of P3HT-conjugated backbone while decreasing the film preparation temperature below room temperature. The optimum growth temperature is about −12°C for the given concentration (2 mg/mL in CHCl₃). The reduced evaporation rate of the solvent results in a better selection of the thermodynamically stable orientation of nanocrystallites onto the substrate. The degree of preferential orientation and size of the crystallites can be further increased on n-octadecyltrichlorosilane-treated SiO₂ substrates as well as by annealing the films at 200°C for 1 h. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Eumelanin for nature‐inspired UV‐absorption enhancement of plastics

In the human body, the black‐brown biopigment eumelanin blocks harmful ultraviolet (UV) radiation. In the plastics industry, additives are often added to polymers to increase their UV‐absorption properties. We herein report an assessment of the biopigment eumelanin as a nature‐inspired additive for plastics to enhance their UV absorption. Since eumelanin is produced by natural sources and is nontoxic, it is an interesting candidate in the field of sustainable plastic additives. In this work, the eumelanin‐containing films of commercial ethylene–vinyl acetate copolymer, a plastic used for packaging applications, were obtained by melt compounding and compression molding. The biopigment dispersion in the films was improved by means of the melanin free acid treatment. It was observed that eumelanin amounts as low as 0.8 wt% caused an increase of the UV absorption, up to one order of magnitude in the UVA range. We also evaluated the effect of eumelanin on the thermal stability and photostability of the films: the biopigment proved to be double‐edged, working both as UV‐absorption enhancer and photo‐prooxidant, as thermogravimetric analysis and infrared spectroscopy revealed. © 2019 Society of Chemical Industry     

Aufbau einer Versuchsanlage zur katalytischen Spaltung des 9,10‐Dihydroxystearinsäuremethylesters mit Luftsauerstoff

The development of new catalysts for the oxidation of chemical compounds with oxygen as cheap and environmentally oxidant is an important topic of the current research. Due to the risk of the formation of potentially explosive gas mixtures aerobic oxidation reactions have to be performed with consideration of the explosion prevention. A safety concept for aerobic oxidation reactions and the construction of an experimental plant is presented. The oxidative cleavage of methyl 9,10‐dihydroxystearate to azelaic acid methyl ester and pelargonic acid was investigated as a model reaction.