Mechanical properties,stress‐relaxation,and orientation of double bubble biaxially oriented polyethylene films

Biaxially oriented linear low density polyethylene (LLDPE) films were produced using the double bubble process with different machine direction (MD) orientation levels and the same transverse direction (TD) blow‐up ratio. Their mechanical behavior was characterized in terms of the tensile strength and tear resistance. The viscoelastic behavior of oriented films was studied using dynamic‐mechanical thermal analysis (DMTA). The microstructure and orientation were characterized using microscopy, X‐ray diffraction pole figures, and birefringence. The results indicate that MD ultimate tensile strength increases and the TD one decreases with MD stretching ratio. Tear propagation resistance, in general, remained mainly constant in TD and decreased in MD, as the draw ratio was increased. The morphology analyses exhibit a typical biaxial lamellar structure for all samples with different lamellar dimensions. Orientation of c‐axis in crystalline phase, molecular chain in amorphous phase along MD increased with draw ratio. In most crystals, a‐axis was located in the normal direction (ND) and the b‐axis in the ND–TD plane. A good correlation was observed between c‐axis orientation factor and MD mechanical properties. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3545–3553, 2006     

Conjugates of unsaturated fatty acids with propylene glycol as potentially less-irritant skin penetration enhancers

Fatty acids (FA) are well known as efficient enhancers for transdermal delivery of drugs; however, their frequent dermal toxicity limits their regular use. In order to utilize the fatty acid as a safe enhancer devoid of its irritant effect, we have synthesized and evaluated a series of fatty acids conjugated to propylene glycol (FA-PG). Each one of the conjugates was prepared as a mono- or di- acyl ester derivative. The effects of the synthetic enhancers on the porcine skin permeability were evaluated in a diffusion cell system using lidocaine as the model drug. In addition, in vivo examinations in rabbits were preformed for skin toxicological evaluation. The results indicate that among the FA-PG conjugates, oleic acid (C18:1(n-9))-PG, linoleic acid (C18:2(n-6))-PG and alpha-linolenic acid (C18:3(n-3))-PG, mono- or di-esters, enhance the penetration of lidocaine relatively to the vehicle (without enhancer). The conjugates of oleic acid (C18:1(n-9)) and linoleic acid (C18:2(n-6)) with PG have demonstrated a similar enhancing effect as the corresponding free fatty acids. Interestingly, although the mono- or the di- conjugates of alpha-linolenic acid (C18:3(n-3)) with PG enhanced the lidocaine flux as the other two fatty acid conjugates, they resulted in a reduced permeability as compared to the action of their free acid. In addition, the mono-conjugates of alpha-linolenic acid (C18:3(n-3)) with PG exhibited elevated skin irritation in rabbits (relative to the fatty acid alone) compared to the significantly reduced irritation of oleate-PG and linoeate-PG mono-conjugates. In conclusion, except saturated FA-PG and alpha-linolenic acid (C18:3(n-3)) - PG mono-conjugates, unsaturated fatty acids (e.g., oleic and linoleic acids) after conjugation to PG may be safe and effective enhancers for delivering topical drugs.     

Unraveling the Physics of Vertical Organic Field Effect Transistors through Nanoscale Engineering of a Self-Assembled Transparent Electrode

While organic transistors' performances are continually pushed to achieve lower power consumption, higher working frequencies, and higher current densities, a new type of organic transistors characterized by a vertical architecture offers a radically different design approach to outperform its traditional counterparts. Naturally, the distinct vertical architecture gives way to different governing physical ground rules and structural key features such as the need for an embedded transparent electrode. In this paper, we make use of a zero-frequency electric field-transparent patterned electrode produced through block-copolymer self-assembly based lithography to control the performances of the vertical organic field effect transistor (VOFET) and to study its governing physical mechanisms. Unlike other VOFET structures, this design, involving well-defined electrode architecture, is fully tractable, allowing for detailed modeling, analysis, and optimization. We provide for the first time a complete account of the physics underpinning the VOFET operation, considering two complementary mechanisms: the virtual contact formation (Schottky barrier lowering) and the induced potential barrier (solid-state triode-like shielding). We demonstrate how each mechanism, separately, accounts for the link between controllable nanoscale structural modifications in the patterned electrode and the VOFET performances. For example, the ON/OFF current ratio increases by up to 2 orders of magnitude when the perforations aspect ratio (height/width) decreases from ～0.2 to ～0.1. The patterned electrode is demonstrated to be not only penetrable to zero-frequency electric fields but also transparent in the visible spectrum, featuring uniformity, spike-free structure, material diversity, amenability with flexible surfaces, low sheet resistance (20-2000 Ω sq(-1)) and high transparency (60-90%). The excellent layer transparency of the patterned electrode and the VOFET's exceptional electrical performances make them both promising elements for future transparent and/or efficient organic electronics.     

Modal dynamics in multimode fibers

The dynamics of modes and their states of polarizations in multimode fibers as a function of time, space, and wavelength are experimentally and theoretically investigated. The results reveal that the states of polarizations are displaced in Poincaré sphere representation when varying the angular orientations of the polarization at the incident light. Such displacements, which complicate the interpretation of the results, are overcome by resorting to modified Poincaré sphere representation. With such modification it should be possible to predict the output modes and their state of polarization when the input mode and state of polarization are known.     

Evaluation of peak picking quality in LC-MS metabolomics data

The output of LC-MS metabolomics experiments consists of mass-peak intensities identified through a peak-picking/alignment procedure. Besides imperfections in biological samples and instrumentation, data accuracy is highly dependent on the applied algorithms and their parameters. Consequently, quality control (QC) is essential for further data analysis. Here, we present a QC approach that is based on discrepancies between replicate samples. First, the quantile normalization of per-sample log-signal distributions is applied to each group of biologically homogeneous samples. Next, the overall quality of each replicate group is characterized by the Z-transformed correlation coefficients between samples. This general QC allows a tuning of the procedure's parameters which minimizes the inter-replicate discrepancies in the generated output. Subsequently, an in-depth QC measure detects local neighborhoods on a template of aligned chromatograms that are enriched by divergences between intensity profiles of replicate samples. These neighborhoods are determined through a segmentation algorithm. The retention time (RT)-m/z positions of the neighborhoods with local divergences are indicative of either: incorrect alignment of chromatographic features, technical problems in the chromatograms, or to a true biological discrepancy between replicates for particular metabolites. We expect this method to aid in the accurate analysis of metabolomics data and in the development of new peak-picking/alignment procedures.     

Viscous flow through a bed of settled aggregates: Evolution of tubes void of particles

Observations show that, when a viscous fluid flows vertically through a bed of settled flocculated aggregates, particles are emerged from locations on the upper surface of the bed, as a volcano process, and hollow tubes are created in the bed though the latter remains basically stable. A theoretical model is presented to explain this odd phenomenon from the onset of particle motion to the development of the tubular cavities and the particles' deposits around them. Analytical and numerical calculations are performed to show fluid streamlines and particle trajectories.     

Water remediation by micelle-clay system: case study for tetracycline and sulfonamide antibiotics

Removal of tetracycline and sulfonamide antibiotics from water by micelles pre-adsorbed on montmorillonite was studied. Micelles of benzyldimethylhexadecylammonium (BDMHDA) were used. Batch experiments demonstrated that the micelle-clay complexes (1% w/w) removed 96-99.9% of antibiotics from their water solutions containing from 5 to 50 mg/L of pharmaceuticals. Column filters (25 cm) made of a mixture of quartz sand and BDMHDA micelle-clay complex at 100:1 w/w ratio removed 94-99.9% of above pharmaceuticals from initial solutions containing 10mg/L and 89% of sulfamethizole from an initial solution containing 10 microg/L of this antibiotic. These filters were also very efficient in the removal of antibiotics in the presence of dissolved soil organic matter removing 89-99% of tetracycline and sulfamethizol from initial solutions containing 10 mg/L of antibiotic in the presence of 8 mg/L of humic acid, or 9 mg/L of fulvic acid. These data indicate that micelle-clay complexes are very efficient for water purification from tetracycline and sulfonamide antibiotics.     

Alcohol-mediated haemolysis in yeast

Although yeast are generally non-haemolytic, we have found that addition of alcohol vapour confers haemolytic properties on many strains of yeast and other fungi. We have called this phenomenon 'microbial alcohol-conferred haemolysis' (MACH). MACH is species- and strain-specific: whereas all six Candida tropicalis strains tested were haemolytic in the presence of ethanol, none among 10 C. glabrata strains tested exhibited this phenomenon. Among 27 C. albicans strains and 11 Saccharomyces cerevisiae strains tested, ethanol-mediated haemolysis was observed in 11 and 4 strains, respectively. Haemolysis is also dependent on the alcohol moiety: n-butanol and n-pentanol could also confer haemolysis, whereas methanol and 2-propanol did not. Haemolysis was found to be dependent on initial oxidation of the alcohol. Reduced haemolysis was observed in specific alcohol dehydrogenase mutants of both Aspergillus nidulans and S. cerevisiae. MACH was not observed during anaerobic growth, and was reduced in the presence of pararosaniline, an aldehyde scavenger. Results suggest that initial oxidation of the alcohol to the corresponding aldehyde is an essential step in the observed phenomenon.