神经网络在聚合过程中的应用

介绍了神经网络在聚合反应过程中的建模，预测、优化，控制和故障诊断及模式识别方面的应用，讨论了其优点和局限性，并分析今后神经网络的发展趋势。     

Phase evolution and thermophysical properties of high-entropy RE2(Y0.2Yb0.2Nb0.2Ta0.2Ce0.2)2O7 oxides

Pursuing novel thermal barrier–coating materials with lower thermal conductivity and high-temperature stability can simultaneously improve the working efficiency and service temperature of a gas turbine. In this study, a series of high-entropy RE₂(Y_0.2Yb_0.2Nb_0.2Ta_0.2Ce_0.2)₂O₇ (RE = La, Nd, Sm, Gd, Dy, and Er) oxides were prepared though solid-state reaction. Through tuning the rare-earth cations, an order–disorder transition occurs from certain partially ordered weberite structure (C222₁) to disordered defective fluorite structure (Fm$\overline{3}$m). All the high-entropy RE₂(Y_0.2Yb_0.2Nb_0.2Ta_0.2Ce_0.2)₂O₇ oxides possess low thermal conductivity in the range of 0.91–1.34 W m⁻¹ K⁻¹ at room temperature, which can be attributed to increased lattice anharmonicity and disorder, resulting in additional phonon scattering. Herein, we proved that the incorporation of heterovalent cations at B-sites in high-entropy A₂B₂O₇ crystals is an effective strategy to reduce the thermal conductivity without compromising the decrease of oxygen vacancy. Moreover, the high-entropy RE₂(Y_0.2Yb_0.2Nb_0.2Ta_0.2Ce_0.2)₂O₇ oxides show the relatively higher thermal expansion coefficients of 10.3–10.7 × 10⁻⁶°C⁻¹ and excellent phase stability at elevated temperatures.     

水流掺气对明流泄洪洞及挑坎水力特性的影响

水流充分掺气可以避免高流速泄洪设施发生空蚀,但也会改变相关水力特性。通过对某大坝泄洪洞掺气设施水力模型试验及关于水流表面自掺气发生条件的相关分析,提出了在全程流速超过38 m/s,长度达550 m的明流洞内仅布置一级掺气设施的建议,较通常情况减少了两级;并针对泄洪洞出流方向与河道流向交角达60°的特点,研究提出了一种大差动异型鼻坎消能工。水工模型试验成果表明,其挑流水舌沿河道纵向扩散良好,水舌外缘与河道对岸保持了30 m以上的安全距离。该泄洪洞建成后经历了高水头、较长时间的泄洪运行,明流洞和鼻坎消能工均无空蚀发生,但挑坎水舌却冲刷到对岸边坡。     

A hybrid recommendation algorithm adapted in e-learning environments

With the rapid development of online learning technology, a huge amount of e-learning materials have been generated which are highly heterogeneous and in various media formats. Besides, e-learning environments are highly dynamic with the ever increasing number of learning resources that are naturally distributed over the network. On the other hand, in the online learning scenario, it is very difficult for users without sufficient background knowledge to choose suitable resources for their learning. In this paper, a hybrid recommender system is proposed to recommend learning items in users’ learning processes. The proposed method consists of two steps: (1) discovering content-related item sets using item-based collaborative filtering (CF), and (2) applying the item sets to sequential pattern mining (SPM) algorithm to filter items according to common learning sequences. The two approaches are combined to recommend potentially useful learning items to guide users in their current learning processes. We also apply the proposed approach to a peer-to-peer learning environment for resource pre-fetching where a central directory of learning items is not available. Experiments are conducted in a centralized and a P2P online learning systems for the evaluation of the proposed method and the results show good performance of it.     

The effect of sputter etching on the surface characteristics of dyed aramid fabrics

Three kinds of aramid fabrics, Technora (modified p-aramid), Conex (m-aramid) and Kevlar (p-aramid), were subjected to sputter etching and argon low-temperature plasma treatments after dyeing in black with disperse dyes. The depth of shade increased considerably on Technora and Kevlar with the sputter etching treatment, but not on Conex fabrics. Argon low-temperature plasma treatment had virtually no effect on the depth of shade on the aramid fabrics.     

Synthesis of superabsorbent resin by ultraviolet photopolymerization

Synthesis of superabsorbent resin (SAR) was achieved by a new method, that of direct UV photopolymerization, and in particular the synthesis of a SAR of acrylic acid–potassium acrylate copolymer by UV photopolymerization was investigated. Influences of ratio (mol) of acrylate monomer to acrylic acid monomer, photoinitiators, crosslinking agents, and exposure time of UV light on the water‐absorbent properties were investigated. The results showed that the water absorbency (Q) of SAR based on Irgacure 1700 or Irgacure 1800 was 545–530 mL/g, but under the same conditions Q was 450 mL/g for the SAR based on Irgacure 651. N,N′‐Methylene bisacrylamide, hydroethyl acrylate, and glycerol were used as crosslinking agents, of which N,N′‐methylene bisacrylamide was the most effective. It crosslinked the molecular chains through attending the copolymerization with acrylic acid (AA) and potassium acrylate. When the exposure time was 5 min, the value of Q was 1368 mL/g (the content of N,N′‐methylene bisacrylamide was 100 ppm). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1618–1624, 2004     

新疆加甫沙尔苏地区中酸性小岩体型矿化蚀变遥感异常提取与找矿

中酸性小岩体的内部及附近的围岩中常形成与岩浆岩体有关的大型、超大型矿床,已成为找矿工作的一个重点方向。由于地质工作程度的限制,中酸性小岩体易被遗漏,严重制约了该类型矿化的发现。在新疆西准噶尔达尔布特断裂带下盘加甫沙尔苏地区找矿工作中,通过综合分析,提出了以遥感手段为主导的中酸性小岩体型矿化找矿模型:利用ASTER数据,通过图像增强处理、图像解译识别中酸性小岩体并提取蚀变遥感异常,结合地质、化探信息综合分析后确定重点检查区域。野外检查发现了加甫沙尔苏斑岩型钼矿化点,证实了该方法的有效性。该方法可以为西部地区中酸性小岩体型矿产资源勘查提供借鉴。     

案例教学法在《计算机基础》教学中的应用研究

随着时代的发展,科技信息的进步对人才的所具备的信息处理的能力提出了很高的要求,计算机基础课程在各类院校都是一门非常重要的公共基础课程,为了更好的让学生掌握好这门课程,计算机教学方法是非常有必要创新的,本文主要介绍案例教学法在计算机基础教学中的优势及其存在的问题等进行研究.     

裂解汽油加氢装置二段反应器缺陷分析

对中国石油吉林石化公司300 kt/a乙烯装置汽油加氢二段反应器接管与筒体焊接接头的缺陷进行详细分析。阐明了缺陷的产生是由于在焊接过程中焊缝熔合区内形成马氏体、增碳层并伴有δ-铁素体的分解而使熔合区内及焊缝处的材质脆化。由于选用焊接材料的错误,产生较高的焊接残余应力致使焊缝开裂。分析了焊缝马氏体、增碳层及δ-铁素体分解的原因。