A three-dimensional,clothed human thermal model

We have developed a three-dimensional clothed human thermal model for predicting physiological responses to temperature and humidity within clothing by considering the thermal properties of fabrics, clothing ensembles, and their designs. The model is a coupled simulation system of a human thermal model and a clothing thermal model. The model performance was investigated by comparing its predictions with experimental data. The following results were obtained. (1) The model predictions of skin temperature distributions and the micro-climate within clothing basically agreed with experimental data. (2) The skin temperatures of clothed body parts were higher than the corresponding body parts in the nude condition, and the skin temperatures of the hand and foot were higher than those in the nude condition, both in the model predictions and in the experimental data. (3) The model prediction of total moisture transfer was almost the same as obtained from the experimental data. 1998 Scripta Technica, Heat Trans Jpn Res, 26(8): 554–566, 1997     

Study of molecular behavior in oxidation of insulating oil using terahertz spectroscopy

The stock of aged power equipment is increasing and it is important to clarify the characteristics of deteriorated insulating oil. This paper describes a basic study of molecular behavior in the oxidation of insulating oil by terahertz spectroscopy. The oxidation of insulating oil was modeled by using various compositions of dodecane and 2‐octanol. The terahertz measurements indicated that signi?cant absorption related to hydroxyl groups (‐OH) occurred between 6 and 7 THz. The absorption band was also observed in accelerated aging alkylbenzene, which is used in power equipment as insulating oil and is sensitive to hydrogen bonds. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 183(1): 9–15, 2013; Published online in Wiley Online Library (wileyonlinelibrary.com). DOI 10.1002/eej.22335     

基于4次线性微分方程的雷电冲击试验波形分析

当冲击试验电压高时,冲击试验电压的波形叠加过冲和振荡。这是由于冲击试验回路的残余电感、被试设备的大杂散电容或二者共同作用产生的。文章用4次微分方程式对振荡冲击试验的等值回路进行了分析,结果表明,波形可分为非振荡波头、振荡波头、非极性反转波尾、非振荡的极性反转波尾和振荡极性反转波尾5个部分。非振荡的极性反转波尾和振荡极性反转波尾的产生原理是不同的。波形的高频分量定义为振荡波形,非振荡波形是不含振荡波形成份的波形。文章的研究结果是后者的产生原因和等值电阻、等值电感的关系以及4次方程的根有关。文章给出了它们之间的关系。     

Development of µGC (micro gas chromatography) with high performance micromachined chip column

A micro gas chromatography (µGC) instrument applying a high performance chip column fabricated on a silicon wafer was developed. Experimental results of the chip column and protyping of a µGC instrument are described. Approximately 35 000 theoretical plates were generated with the chip column coated liquid phase (5% phenyl-/95% dimethyl-polysiloxane). The theoretical plates of the chip column were close to those of the capillary column. Experimental minimum height equivalent to a theoretical plate (HETP, H_min) of the chip column was 1.2 times higher than the calculated H_min. A prototype µGC applying the chip column was developed. The µGC generated approximately 35 000 theoretical plates, similar to the theoretical plates obtained by a commercial GC instrument. Copyright © 2009 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Effects of cononsolvency on gelation of poly(vinyl alcohol) in mixed solvents of dimethyl sulfoxide and water

We studied the rates of gelation and phase separation of poly(vinyl alcohol) (PVA) solutions in mixtures of dimethyl sulfoxide (DMSO) and water at 25 °C and found that both the rates show a maximum at a volume fraction of DMSO φ_DMSO=0.60 while gelation was not observed either in pure DMSO or pure water, suggesting that water-DMSO is a cononsolvent system for PVA. On the basis of the data by Cowie [Can J Chem 36 (1961) 2240] we concluded that the 1:2 stable complex between one DMSO molecule and two water molecules is the main cause of this cononsolvency.     

Design of moving magnet type pickup actuator using inserted coil

Recently, the demand of the information storage devices with large storage capacity such as Blu-ray Disc and high-definition television is increased. In keeping with this trend, the optical storage devices are also required to have high data transfer rate and large storage capacity. To satisfy these requirements, the actuator for optical disc drive should have a high servo bandwidth to compensate the vibration of optical disc. The servo bandwidth is limited by some flexible modes of the actuator, thus it is essential to make these frequencies of flexible modes to high frequency region. The frequency of flexible mode depends on materials and shape. Stiff materials and simple shape is useful to increase the frequency of flexible mode. In this paper, we suggested a moving magnet type actuator having flexible modes which are happened at high frequency region. Generally, the moving magnet type actuator has an advantage to increase the frequency of flexible mode because the moving magnet type actuator has simple structure and the Young’s modulus of magnet is high. However, large moving mass and inefficiency of Electromagnetic (EM) circuit cut down driving sensitivities of actuator. To improve driving sensitivities, we designed the model with the closed EM circuit for tracking actuation. The design of experiments (DOE) procedure is applied to get proper design parameters and the variable metric method (VMM) which is a technique of optimization is used to improve driving sensitivity. The lens holder is also improved based on the optimization result of EM circuit. And to make up for the low efficiency of EM circuit, the thermal stability is checked on condition that the input current is very high. At last, the final design of moving magnet type actuator is suggested and it is verified that the driving performance and the structural stiffness of the final design is sufficient.     

Rough ideals in semigroups

We shall introduce the notion of a rough left [right, two-sided, bi-] ideal in a semigroup, which is an extended notion of a left [right, two-sided, bi-] ideal in a semigroup, and give some properties of such ideals.     

Ultraviolet bonding of perfluoropolyethers to carbon surfaces investigated using quantum chemical methods

For improving the tribological performance of hard disk drives, nanometer-thick perfluoropolyether (PFPE) lubricant films are generally treated with ultraviolet (UV) irradiation to bond them to the carbon overcoats of the disks. By modeling UV irradiation as an electron emission and attachment process, we investigate the UV bonding of nonfunctional PFPE Z and functional PFPE Zdol to hydrogenated and nitrogenated carbon surfaces with quantum chemical methods. Our calculation results show that, upon electron attachment, Z dissociates at its main chain to two fragments terminated by CF₂CF₂ and CF₂O groups, whereas Zdol dissociates to a hydrogen fluoride and a fragment. The perfluoromethoxy oxygen in one of the Z fragments and the carbon radical and the hydrogen-truncated end group in the Zdol fragment interact strongly with sp² and oxidized sites on carbon surfaces. Imine moieties on the CNx surface also contribute considerably to the UV bonding of Zdol.