Effects of species and moisture content on penetration of liquid in laser incised lumber by the passive impregnation method

Penetration of liquid by passive impregnation method for Douglas-fir (Pseudotsuga menziesii Franco), sugi (Cryptomeria japonica D. Don) and Japanese larch (Larix leptolepis Gordon) was studied. Effects of initial moisture content of sugi (16, 43 and 70% moisture content) on liquid penetration were also studied. Dried Douglas-fir (mc=14%) and sugi (mc=16%), and green Japanese larch (mc=45%) and sugi (mc=70%) were treated by passive impregnation method for penetration analysis. It was observed that dried sugi had the highest level of liquid penetration both in length (170 mm) and width (8 mm) for all measured sections followed by green sugi, green Japanese larch and dried Douglas-fir. In case of different initial moisture content, the highest absorption (624 kg/m³) and penetration (maximum 87 and 96% at cross and longitudinal surfaces, respectively) was observed for sugi having the lowest initial moisture content under the same passive impregnation conditions. Absorption and penetration decreased with the increase of initial moisture content for sugi. These results could help in designing incising pattern and density, as well as solving the problems related to high initial moisture content of wood for passive impregnation.     

Visualization of spherical data by Yin-Yang grid

Visualization in the spherical geometry is ubiquitous in geophysical data processing. For the spherical visualization, the commonly used spherical polar coordinate system is not ideal due to its grid convergence nature near the poles. We propose to use a spherical overset grid system called Yin-Yang grid as the base grid system of the spherical visualization. The convergence-free nature of the Yin-Yang grid leads to a balanced data distribution and effective visualization processing in a sphere. The Yin-Yang grid is already used in various geophysical simulations including the geodynamo and mantle convection in the spherical geometry. Data produced by the Yin-Yang grid can be, and should be, visualized directly on the same Yin-Yang grid system without any data remapping. Since the component grid of the Yin-Yang grid is a part of (or low latitude region of) the standard spherical polar coordinate system, it is straightforward to convert an existing spherical visualization tool based on the spherical polar coordinates into a tool based on the Yin-Yang grid.     

New cleavable surfactants derived from glucono-1,5-lactone

New amido nonionic cleavable surfactants were synthesized in good yields by the acetalization of glucono-1,5-lactone with octanal, 2-octanone or 2-undecanone, followed by amidation with monoethanolamine, diethanolamine or morpholine. These compounds possessed good water solubilities. The compounds derived from 2-octanone showed higher critical micelle concentrations than the compounds from octanal. For the same hydrophobic chain, both the micelle-forming property and the ability to lower surface tension increased with the change in the terminal amide group in the order diethanolamide<morpholide<monoethanolamide. Interestingly, in spite of their relatively short hydrophobic chains, these compounds showed greater ability to lower surface tension than conventional nonionic surfactants, such as alcohol ethoxylates. Furthermore, their acid-decomposition properties were determined. Their decomposition rates were also compared with that of the corresponding carboxylate type of compound derived from glucono-1,5-lactone.     

Mmic technology for communication systems

MMIC technology is recently progressing at a rapid rate and is now being applied in communications systems. However, there remain few practical applications. This is mainly due to the high cost of conventional mmics because of the small market size and specialized needs. This paper introduces three new technical approaches that overcome the problems: uniplanar mmic, line unified fet^lufet), and multilayer mmic. Concepts and several examples of these technologies are described. It is shown that these technologies are effective not only for cost reduction but also for increased performance. In addition, one example of system application is described.     

Fracture toughness of impact-modified polymers based on the J-integral

The fracture toughness characterization of four impact-modified polymers based on the J-integral concept was studied. We have discovered that the use of the “crack blunting line” concept needs revision. Direct measurements of the crack growth can be made (as opposed to indirect readings from the fracture surface) that test the applicability of the crack blunting concept. Our results indicate that for rubber-toughened polymers the use of the blunting line fails to specify properly the critical J-integral value for crack initiation.     

Optical properties of C60/a-C superlattice structures for solar cell applications

C₆₀/amorphous carbon superlattice structures were fabricated by shutter-controlled molecular beam deposition. The periodic structure of resulted films was confirmed by X-ray diffraction measurements. From the UV–vis reflectance/transmittance measurements, the energy shift of absorption edge was observed in the superlattice structures as a function of their well width. The carbon-based superlattice structure is the useful technique to control the band gap energy of carbon materials.     

Tetrahydropyranyl- and furanyl-protected polyhydroxystyrene in chemical amplification systems

Tetrahydropyranyl- (THP) and furanyl- (THF) protected polyhydroxystyrene (PHS) polymers have been investigated for their potential use in conjunction with onium salt acid precursors to yield high-sensitivity resist systems. The synthesized polymers have high transmittance at 248 nm (the wavelength used in next-generation excimer laser, KrF exposure tools). At 248 nm the transmittance for a 1-μm thick film is ～ 80% (Abs = 0.097 μm^?1). The acid sensitivity of the acetal functionality at room temperature is high, requiring careful handling of all materials to prevent any premature deprotection of the hydroxy group. The highest lithographic sensitivities obtained so far with a system consisting of poly(p-tetrahydropyranyl-oxy-styrene) base resin and 1 mol % of bis (p-tert-butyl phenyl) iodinium triflate (TBIT) was ～ 2 mJ / cm². High-resolution line and space patterns (0.35 μm) were obtained with a system comprising PHS-p-THP and an acid precursor, using an excimer laser step and repeat exposure at 248 nm.     

Evaluation of vibration in many positions by SOM

We propose a method of evaluating the vibration of motor-operated electric tools (MOETs) by using a self-organizing feature map (SOM). The vibration spectrum is used to evaluate the MOET vibration. These vibration spectra are derived from 18 vibration data obtained by measurements on three different positions of a MOET. The spectra are then sent to the SOM network for the calculations. The vibration spectra are classified by the SOM, and calculations give the Euclidean distance from the weight vector in order to develop a quantitative evaluation. A statistic analysis of the Euclidean distance allows a quantitative evaluation of a MOET with respect to vibration stress and other relevant parameters.This work was presented, in part, at the 9th International Symposium on Artificial Life and Robotics, Oita, Japan, January 28–30, 2004     

Drift velocity of electron swarm in configuration space

In 1977, Tagashira and colleagues reported that the center‐of‐mass drift velocity W_r of an electron swarm defined in time of flight (TOF) takes a larger value than the drift velocity W_v defined in pulsed Townsend (PT) when ionization collisions take place. At the same time, they explained that the larger values of W_r are caused by the ionization generation of electrons at the front side of extending swarm due to higher mean energy. In this paper, a new definition of virtual drift velocity in configuration space W′_r defined in PT is proposed, and calculated data of drift velocities and related quantities such as ionization coefficients and ionization frequencies in Ar in a high E/N range are discussed relative to Tagashira's data. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 155(2): 1–7, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20131