Simple Method for Measuring the Peroxide Value in a Colored Lipid

We developed a simple method for quantification of the peroxide value (PV) in colored lipids on the basis of the reaction between triphenylphosphine (TPP) and oxidized oil to afford triphenylphosphineoxide (TPPO). Diphenylphosphineoxide (DPPO) was employed as internal standard. The formed TPPO was analyzed by high-pressure liquid chromatography–UV spectroscopy with absorption at 260 nm. The conditions that gave the highest correlative calibration curve between the peak area on the chromatogram and peroxide value were identified: the optimum TPP–oxidized oil mix ratio, reaction temperature, and reaction time were found to be 2:1, 40 °C, and 30 min, respectively. Linear calibration curves, passing through the origin, were obtained for PV versus TPPO and TPPO versus DPPO. The quantification limit for this method was 2.01 pmol hydroperoxyl group, which corresponds to a PV value of 0.2 meq/kg in a 10-mg oil sample. This method was used to measure the PV in colored fats and oils or lipids extracted from dark meat and processed food containing a coloring agent. Though the official method could not measure the PVs in the colored lipids, the method proposed here, which uses an inexpensive chemical reagent and machine, could. The developed method could play an important role for food quality control.     

Characterization on the Conformation of Glucoamylase from Rhizopus niveus and Rhizopus delemar

Using the pH-jump (neutral to above 11) for Tyr-OH ionization as a probe, two glucoamylases from Rhizopus niveus and Rhizopus delemar were found to be caused the change in conformation, which is in a kinetically single step. The pH titration at pHs below 12 was carried out on a multidimensional correlation spectrophotometer. Correlations among the spectrophotometric properties: fluorescence, absorption and circular dichroism are almost identical for the two enzymes. These results suggest that conformational characteristics of the niveus enzyme is almost the same as that of the delemar one.     

Short communication: estimation of plasma osmolality from plasma electrolytes, glucose, and urea in calves

Plasma osmolality estimated from plasma concentrations of Na+, Cl-, K+, glucose, and urea was compared with measured osmolality in preweaned Holstein calves. When calves (n = 5) were fed only milk replacer after fasting for 24 h, measured osmolality fluctuated almost in parallel with estimated osmolality during the 8-h period after feeding, although estimated values were about 90% of measured values. When calves (n = 5) were fed only calf starter after fasting for more than 16 h, measured osmolality did not parallel the estimated osmolality during the 8-h period after feeding. Some factors depressed measured osmolality in the first 2 h.     

Detail analysis of fusion neutronics benchmark experiment for iron

In order to specify the best nuclear data on iron, the fusion neutronics benchmark experiment on iron at Japan Atomic Energy Agency (JAEA)/Fusion Neutronics Source (FNS) was analyzed in detail with MCNP-4C and the latest nuclear data libraries, JENDL-3.3, FENDL-2.1, JEFF-3.1 and ENDF/B-VII.0. As a result, totally the calculation result with ENDF/B-VII.0 agreed with the measurement best, except that it underestimated the measured neutron flux above 10 MeV with the depth. It was noted that the calculation result with JENDL-3.3 overestimated the measured neutrons below a few keV. Through the DORT calculations based on the iron data in ENDF/B-VII.0, it was found out that the first inelastic scattering cross-section data of ⁵⁷Fe in JENDL-3.3 caused the overestimation.     

Effect of nonproportional loading on creep-fatigue properties of 304 stainless steel at low strain ranges near the elastic region

The effect of nonproportional strain path on fatigue/creep-fatigue properties was investigated with 304 stainless steel at 550°C under strain controlled biaxial conditions. The fatigue/creep-fatigue life reduction due to nonproportional strain path occurred even at the lowest strain range investigated, that is, 0.2% for fatigue loading and 0.3% for creep-fatigue loading. The Mises-type path-dependent equivalent strain range was employed in order to evaluate the fatigue/creep-fatigue strength under nonproportional loading conditions. Stress relaxation behavior under nonproportional loading was examined. It was shown that stress relaxes proportionally toward the origin of stress plane even under nonproportional loading. Fatigue damage and creep damage were calculated based on the linear damage summation rule. Life prediction was shown to be possible within an accuracy of a factor of about 2 for nonproportional loading along with other waveforms including pure axial loading, pure torsional loading and combined proportional loading.     

Effects of water chemistry and potential distribution on electrochemical corrosion potential measurements in 553 K pure water

The effects of water chemistry distribution on the potential of a reference electrode and of the potential distribution on the measured potential should be known qualitatively to obtain accurate electrochemical corrosion potential (ECP) data in BWRs. First, the effects of oxygen on a platinum reference electrode were studied in 553 K pure water containing dissolved hydrogen (DH) concentration of 26–105 μg kg^?1 (ppb). The platinum electrode worked in the same way as the theoretical hydrogen electrode under the condition that the molar ratio of DH to dissolved oxygen (DO) was more than 10 and that DO was less than 100 ppb. Second, the effects of potential distribution on the measured potential were studied by using the ECP measurement part without platinum deposition on the surfaces connected to another ECP measurement part with platinum deposition on the surfaces in 553 K pure water containing 100–130 ppb of DH or 100–130 ppb of DH plus 400 ppb of hydrogen peroxide. Measured potentials for each ECP measurement part were in good agreement with literature data for each surface condition. The lead wire connecting point did not affect the measured potential. Potential should be measured at the nearest point from the reference electrode in which case it will be not affected by either the potential distribution or the connection point of the lead wire in pure water.     

Occurrence of multiple ethyl 4-chloro-3-oxobutanoate-reducing enzymes in Candida magnoliae

Multiple ethyl 4-chloro-3-oxobutanoate (COBE)-reducing enzymes were isolated from a cell-free extract of Candida magnoliae. A NADPH-dependent COBE-reducing enzyme, distinct from the carbonyl reductase and aldehyde reductase previously reported, was purified to homogeneity using five steps, including polyethylene glycol treatment. The relative molecular mass of the enzyme was estimated to be 86,000 on high performance gel-permeation chromatography and 29,000 on sodium dodecyl sulfate polyacrylamide gel electrophoresis. The enzyme catalyzed the reduction of COBE to the corresponding (S)-alcohol with a 51% enantiomeric excess. The substrate specificity of the enzyme was different from those of the other COBE-reducing enzymes of the same strain. The partial amino acid sequences of the enzyme showed that it belongs to the short chain alcohol dehydrogenase/reductase (SDR) family. This is the first report of multiple COBE-reducing enzymes with various stereoselectivities occurring in the same strain but belonging to different (super)families.     

A comparative study of microbubble generation by mechanical agitation and sonication

As focus on the potential applications of microbubbles increases, information about the efficiency of generation methods and their effects on the properties and stability of microbubbles is crucial in the selection of an appropriate method to generate microbubbles with the desired properties. This paper evaluates the generation efficiencies of two commonly used methods, mechanical agitation and sonication, in two surfactant systems. The results demonstrated that sonication was more effective than mechanical agitation in the generation of microbubbles in terms of higher gas hold-up, smaller bubble size, and larger interfacial area. Analysis of the changes in bubble size over time revealed that the existence of a critical diameter for the shrinkage of microbubbles. The behavior of microbubbles and the critical diameter depended on the generation method employed and the surfactant used.

Industrial relevance

Microbubble technology has gradually become accepted as a cost-effective and environmentally friendly technology with great potential within almost every field of the food industry. Selection of a suitable method to generate microbubbles with the desired properties is crucial. Mechanical agitation and sonication are two commonly used methods for microbubble generation. However, systematic information on their generation efficiency and effects on the properties of microbubbles is not available. Thus, a comparative study was conducted in this paper.     

Nosocomial diarrhoea in the elderly due to enterotoxigenic Clostridium perfringens

Zinc is an important trace element for immune function. Here, we show that zinc addition in a serum- and lipopolysaccharide-free cell culture system leads to significantly enhanced levels of interleukin 1 beta (IL-1 beta) and tumour necrosis factor alpha (TNF-alpha) and to expression of the corresponding mRNA in human peripheral blood mononuclear cells (PBMC). Structurally related divalent cations like cobalt, nickel, and mercury also partially increase monokine secretion but to a much lower and thus insignificant extent. They fail to induce mRNA of TNF-alpha after 3 h of culture. Therefore, monokine induction is a zinc-specific effect influenced by the physicochemical properties of the ion. Confirmation of the unique significance of zinc for immune function provides a better understanding of the mechanisms of specific zinc-mediated immune modulation.