Numerical simulation and PIV measurement of the flow-field in optical disc drives

A system of numerical flow simulation with an automated mesh generator and parallelized solver was developed and applied to the flow-field inside an optical disc drive. In this simulation system, a uniformly spaced Cartesian grid is used to reduce time and automatically generate a mesh from CAD data for complicated geometries, such as optical disc drives. The simulation results of optical disc drives are validated by particle image velocimetry (PIV) and pressure-distribution measurements. The measured velocity distributions above a rotating disc and around a pick-up unit show quantitative agreement with the simulated distributions. For the pressure distributions on a top case of an optical disc drive, although there is an error of 10% between simulated and measured results, the position of the peaks and distribution of pressure show good agreement. Comparing both sets of measurements, the simulation results in a Cartesian grid system are sufficiently accurate to enable the flow-field to be quantitatively assessed. This numerical flow simulation is applied to investigate the detailed flow-field in a commercial optical disc drive.     

Isotropic photo-decomposition of spherical organic polymers on rutile TiO₂(110) surfaces

We observed the photo-decomposition process of polystyrene latex (PSL) spheres on a rutile TiO?(110) single crystal surface by using atomic force microscopy. During the decomposition process, both the height and width of the PSL spheres linearly decreased with the irradiation time in a similar way from the beginning, suggesting that the PSL spheres are isotropically decomposed. This indicates that the interface between the PSL spheres and the TiO? surface is not a dominant reaction site, as expected from normal photocatalytic reactions.     

Bubble behavior in vertical tube banks installed in a fluidized bed

Fluidized bed combustion is one of the advantageous technologies for coal and/or incineration firing especially with respect to the environmental protection of emissions, such as NO_x/SO_x. Bed material movement in such a fluidized bed has a prime importance in the heat transfer process. Thus, quantitative measurement of the bed material movement and the void fraction are indispensable for better understanding of the fluidized bed. In this investigation, neutron radiography is applied to visualize the bed material movement in a simulated fluidized bed heat exchanger installed with vertical tubes. Bubble behavior and void fraction profile are obtained by the image processing technique. Bubble movement is highly restrained by these vertical tubes, so that the bubbles rise up along the tube. The bubble diameter is well correlated by the modified Mori and Wen's correlation taking into account the pitch of the tube arrangement. The bubble rise velocity and void fraction are well correlated by applying the drift‐flux model. © 2003 Wiley Periodicals, Inc. Heat Trans Asian Res, 32(8): 727–739, 2003; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.10127     

Laser-induced shockwave chromatography: a separation and analysis method for nanometer-sized particles and molecules

A microscopic chromatography has been developed where nanometer-size molecules or particles are separated according to their size by the laser-induced shockwave in a water-filled capillary. As the shockwave passed through the mixture of molecules/particles in solution, they move to the direction of the propagation of the shockwave. The distance from the point of shockwave generation depends on the particle size or molecular weight. This technique has some advantages compared to conventional chromatography, in terms of quick analysis of molecular weight and applicability to sticky and adsorbing polymers. Experimental results obtained for proteins, their aggregates, and inorganic nanoparticles are presented.     

Effect of Carrier Gas Species on Ferroelectric Properties of PZT/Stainless-Steel Fabricated by CO2 Laser-Assisted Aerosol Deposition

Pb(Zr,Ti)O₃ (PZT) thick films were deposited onto stainless-steel substrates by aerosol deposition using different kinds of carrier gases and were irradiated by CO₂ laser both during and after deposition, for the recovery of ferroelectricity. The ferroelectric and dielectric properties of PZT films deposited using oxygen and nitrogen gases and irradiated by CO₂ laser were superior to those of films deposited using He gas and irradiated by the laser. Some kinds of defects within the film were relaxed by CO₂ laser irradiation during deposition, and grain growth in the film was promoted by post-annealing using laser irradiation.     

Complex autoregressive model for shape recognition

A complex autoregressive model for invariant feature extraction to recognize arbitrary shapes on a plane is presented. A fast algorithm to calculate complex autoregressive coefficients and complex PARCOR coefficients of the model is also shown. The coefficients are invariant to rotation around the origin and to choice of the starting point in tracing a boundary. It is possible to make them invariant to scale and translation. Experimental results that the complicated shapes like nonconvex boundaries can be recognized in high accuracy, even in the low-order model. It is seen that the complex PARCOR coefficients tend to provide more accurate classification than the complex AR coefficients     

Hormonal regulation of aldolase B gene expression in rat primary cultured hepatocytes

A high performance liquid chromatography method for the determination of N3-methyl-5'-deoxy-5-fluorouridine, a possible metabolic product of the anticancer pro-drug 5'-deoxy-5-fluorouridine, in human serum and urine is described. Sample treatment involved addition of internal standard (5-bromouracil) and protein precipitation with ammonium sulphate (serum samples) followed by liquid-liquid extraction with ethyl acetate-isopropanol (90:10, v/v). The average recovery at 0.5 mg ml-1 level was (80 +/- 4%). A linear response extending over two decades of concentration was observed. Detection limits of 50 and 100 ng ml-1 were obtained in serum and urine, respectively.     

The flow characteristics of an upward gas‐liquid two‐phase flow in a vertical tube with a wire coil: Part 1. Experimental results of flow pattern,void fraction,and pressure drop

Experiments were carried out to investigate the flow pattern, average void fraction, and pressure drop of an upward air‐water two‐phase flow in vertical tubes of 25‐mm inside diameter with wire coils of varying wire diameter, pitch, and number of coils in cross section. Five kinds of flow patterns—bubble, slug, churn, semiannular, and annular flow—were defined based on the observation of flow behavior in the experiments. At higher water flowrates, the bubble‐to‐slug transition occurred at lower air flowrates in tubes with wire coils than in smooth tubes. The average void fraction was found by using the drift flux model. Further, the experimental results of the friction pressure drop were compared with the Lockhart‐Martinelli correlation. As a result, a correlation with the constant C in Chisholm's equation was obtained as a function of the wire coil pitch‐to‐diameter ratio. © 2002 Wiley Periodicals, Inc. Heat Trans Asian Res, 31(8): 639–651, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.10066     

Living radical polymerization in homogeneous system with phenylazotriphenylmethane as a thermal iniferter

Summary Radical polymerization of methyl methacrylate (MMA) with phenylazotriphenylmethane (PAT) was found to give the polymer with a trityl group bonded at its -chain end which could further dissociate into propagating and trityl radicals. Therefore, it was confirmed that PAT served as a thermal iniferter for polymerization of MMA, which proceeded via a living radical mechanism, i.e. yield and molecular weight of the polymers increased with reaction time. When the polymer thus obtained was used as a polymeric iniferter for the polymerization of styrene (St), the block copolymer was obtained.