Cognitive workload analysis in rail signalling environments

When working in safety critical environments, such as railway signalling, technologies are often used to assist the operator in order to make safe decisions as well as to increase efficiency. Keeping mental workload at manageable levels is one of the most critical factors to ensure that tasks can be completed in a safe and effective manner. Numerous methods have been used to measure mental workload, but none of these have managed to show the use of distinct resource pools. This paper therefore measures the levels of usage of different cognitive processes when typical tasks are carried out in two railway signalling environments. To that end, the Multiple Resource Questionnaire is used. The aims of this paper are twofold: First, it establishes the value of the Multiple Resource Questionnaire as a technique in human factors. Second, it investigates and compares the cognitive resources required to carry out the railway signalling task in two different signalling environments.     

Reports for 1982 of the Regional Associations.

Reports for 1982 are listed for the following regional association meetings: Sixty-Second Annual Meeting of the Western Psychological Association; Fifty-Second Annual Meeting of the Rocky Mountain Psychological Association; Fifty-Fourth Annual Meeting of the Midwestern Psychological Association; Twenty-Eighth Annual Meeting of the Southeastern Psychological Association; Twenty-Eighth Annual Meeting of the Southwestern Psychological Association; Twenty-Second Annual Meeting of the New England Psychological Association; Fifty-Third Annual Meeting of the Eastern Psychological Association; and Seventy-Fourth Annual Meeting of the Southern Society for Philosophy and Psychology. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Awareness of coeliac disease and the gluten status of ‘gluten‐free’ food obtained on request in catering outlets in Ireland

The only current effective treatment for coeliac disease (CD) is a lifelong diet that is as free from gluten as possible. This study provides baseline evidence to inform future interventions of benefit to CD sufferers by examining awareness of CD issues by food servers and preparation staff, assessing their claims to provide gluten‐free foods by analysis of a meal concurrently sampled. While the majority of attempts to purchase a ‘gluten‐free’ meal on request in restaurants were successful, some 10% of all samples contained gluten, 2.7% between 21 and 100 mg kg^?1, and 7.7% >100 mg kg^?1 and two unsatisfactory samples were purchased from so‐called coeliac‐friendly restaurants. These findings were consistent with those obtained previously by Collin et al. [Alimentary Pharmacology & Therapeutics 19 (2004) 1277], Størsrud et al. [European Food Research & Technology 217 (2003) 481], Gélinas et al. [International Journal of Food Science & Technology 43 (2008) 1245] for cross contamination with gluten. Staff confidence, ‘gluten‐free’ notices, signs and menu choices were no guarantee of risk‐free dining for CD sufferers. Based on our findings we suggest the need for further training, specifically for chefs and managers.     

Vertical dynamics of the Maglev vehicle Transrapid

The Maglev vehicle Transrapid is levitated by magnetic forces which pull the vehicles levitation frames toward the guideway from below. The magnets possess poles with alternating fluxes which are part of the synchronous long stator linear motor. Although the Transrapid glides along its guideway without mechanical contact, this alternation as well as the loading and unloading of the guideway girders excite vibrations of the ground. In order to calculate the time behavior of the vibrational emissions, a simulation of the transfer of a Transrapid vehicle over several guideway girders is proposed. The equations of motion for the vehicle and the girders are calculated separately by the MBS software NEWEUL and assembled and numerically integrated in MATLAB/SIMULINK. The control law for the magnet forces is simplified by the characteristics of linear spring-damper elements. The controlled magnet forces travel along the guideway continuously and include the dynamic component due to the alternating fluxes and the geometry of the poles and stator. Results of a complete vehicle moving along a guideway consisting of several girders can be obtained within a few minutes of computation time. Therefore, the mechanism of excitations can be analyzed by numerical time integration in the full state space. The results are validated by measurements of the forces in the joints of the guideway girders. The vibrational emission along the Transrapid guideway differs from the vibrations of contact-afflicted vehicles as no impacts and fewer stochastic effects occur.     

Simultaneous degradation of atrazine and simazine by a binary culture of Stenotrophomonas maltophilia and Arthrobacter sp. in a two‐stage biofilm reactor

BACKGROUND: The impact of mixtures of chloro‐triazinic herbicides, such as atrazine and simazine, on aquatic ecosystems is of environmental concern. To study their biodegradation under various operational conditions, a binary community comprising Stenotrophomonas maltophilia and Arthrobacter sp. attached to the porous support of a packed bed reactor, was evaluated. RESULTS: The genetic analysis of the two atrazine‐degrading strains revealed that genes atzA, atzB, atzC are present in both bacteria, but only S. maltophilia possess atzD. Thus, by cultivating Arthrobacter sp. on these herbicides, cyanuric acid accumulation was observed. When the binary community was cultivated in the biofilm reactor, at all the loading rates probed, both herbicides were entirely removed. However, complete biodegradation of cyanuric acid was not achieved. CONCLUSIONS: Even with a two‐stage reactor, cyanuric acid was only partially removed. This fact could be attributed to the absence, in the second stage, of an easily degradable energy source, required by S. maltophilia for the uptake and cometabolic degradation of the recalcitrant heterocyclic ring. Responding to differences in nutritional conditions prevailing at each reactor stage, local differences in species' predominance were clearly detected by microbiological and molecular biology methods. Copyright © 2010 Society of Chemical Industry     

Phase decomposition upon alteration of radiation-damaged monazite-(ce) from moss, Østfold, norway

The internal textures of crystals of moderately radiation-damaged monazite-(Ce) from Moss, Norway, indicate heavy, secondary chemical alteration. In fact, the cm-sized specimens are no longer mono-mineral monazite but rather a composite consisting of monazite-(Ce) and apatite pervaded by several generations of fractures filled with sulphides and a phase rich in Th, Y, and Si. This composite is virtually a 'pseudomorph' after primary euhedral monazite crystals whose faces are still well preserved. The chemical alteration has resulted in major reworking and decomposition of the primary crystals, with potentially uncontrolled elemental changes, including extensive release of Th from the primary monazite and local redeposition of radionuclides in fracture fillings. This seems to question the general alteration-resistance of orthophosphate phases in a low-temperature, 'wet' environment, and hence their suitability as potential host ceramics for the long-term immobilisation of radioactive waste.     

High-Impact PLA in Compatibilized PLA/PCL Blends: Optimization of Blend Composition and Type and Content of Compatibilizer

In this work, the effectiveness of seven commercial compatibilizers is tested in polylactide (PLA)/poly(ε-caprolactone) (PCL) blends with different compositions to obtain a high-impact PLA. None of the compatibilizers is effective for 90/10 and 80/20 PLA/PCL compositions, as no improvement of the impact strength is observed. For the 70/30 composition, compatibilizers having glycidyl methacrylate (GMA) and acrylate groups in their structure are proved the most effective, as the morphological change towards co-continuity induced by them leads to significant impact strength improvements (of ≈345% and 90% with respect to the neat PLA and the noncompatibilized PLA/PCL 70/30 blend, respectively). The 70/30 PLA/PCL composition, as it shows the best balance of properties, and the best compatibilizer (ElvaloyPTW) are chosen to carry out the optimization of the compatibilizer content. It is found that adding 6 phr to the blend results in highly toughened and ductile blends while maintaining a high modulus and yield strength values. Larger compatibilizer contents lead to even higher impact strength values, but the low-strain mechanical properties are notably reduced. Thus, in this work, a simple and easily scalable method to produce high-impact PLA is shown, as it implies the compounding of three commercially available components without involving any toxic solvents.     

Effect of laser microcutting on thermo-mechanical properties of NiTiCu shape memory alloy

The machining of shape memory alloys (SMAs), such as NiTi based alloys, is a very interesting and relevant topic for several industrial applications in the biomedical, sensor and actuator fields. Laser technology is one of the most suitable methods for the manufacturing of products in the aforementioned fields, mainly when small and precise features have to be included. Due to the thermal nature of this process, study of its effect on the functional properties of these materials is needed. Except for binary NiTi, few results on the laser machining of NiTi based alloys are available in the literature. In this work, thin sheets of Ni40Ti50Cu10 (at.%) were processed by a fibre laser and the effect of process speed on the material properties was analysed. Scanning electronic microscopy was adopted for observation of the laser cut edges’ morphology. Chemical composition of the processed material was evaluated by energy dispersion spectroscopy and nanohardness measurements were used to estimate the heat affected zone. SMA functional properties were studied on both base and laser machined material. These characteristics are affected by laser machining for the presence of melted material; this effect can be minimised by increasing the laser process speed.     

Selective hydrogenation of styrene. II. Poisoning of Pd/Al2O3 by thiophene and pyridine

The poisoning of a commercial Pd/Al₂O₃ catalyst by pyridine and thiophene during the selective hydrogenation of styrene to ethylbenzene was studied. It was found that the Pd electronic state is the main factor controlling the interaction between the metal and the poisons. Pyridine added to the non-poisoned feed in a pulse produces a modification in the Pd electronic state and a decrease in conversion, but, within certain limits, inhibits the adsorption of more pyridine or thiophene molecules.     

Microscopical features in retrieved human Branemark implants: a report of 19 cases

The authors present a histologic analysis of 19 Branemark titanium implants retrieved for different causes: four implants were removed for abutment fracture, one for dental nerve dysesthesia, two for bone overheating, two for peri-implantitis, nine for mobility, one for unknown causes. In the implants removed for fracture a high bone-implant contact percentage was present (71.83 +/- 4.96%) with compact, mature bone at the interface. The picture of the failure due to bone overheating was characteristic with the presence of bone sequestra and of a gap between implant and bone filled by lymphocytes and plasma cells: many bacteria surrounded the necrotic bone and no newly regenerated bone was present. In peri-implantitis an inflammatory infiltrate was observed in the peri-implant tissues: a dense fibrous connective tissue was present around implants failed for mobility. The microscopical picture is certainly extremely important in identifying the causal determinants of an implant failure.