Simultaneous degradation of atrazine and simazine by a binary culture of Stenotrophomonas maltophilia and Arthrobacter sp. in a two‐stage biofilm reactor

BACKGROUND: The impact of mixtures of chloro‐triazinic herbicides, such as atrazine and simazine, on aquatic ecosystems is of environmental concern. To study their biodegradation under various operational conditions, a binary community comprising Stenotrophomonas maltophilia and Arthrobacter sp. attached to the porous support of a packed bed reactor, was evaluated. RESULTS: The genetic analysis of the two atrazine‐degrading strains revealed that genes atzA, atzB, atzC are present in both bacteria, but only S. maltophilia possess atzD. Thus, by cultivating Arthrobacter sp. on these herbicides, cyanuric acid accumulation was observed. When the binary community was cultivated in the biofilm reactor, at all the loading rates probed, both herbicides were entirely removed. However, complete biodegradation of cyanuric acid was not achieved. CONCLUSIONS: Even with a two‐stage reactor, cyanuric acid was only partially removed. This fact could be attributed to the absence, in the second stage, of an easily degradable energy source, required by S. maltophilia for the uptake and cometabolic degradation of the recalcitrant heterocyclic ring. Responding to differences in nutritional conditions prevailing at each reactor stage, local differences in species' predominance were clearly detected by microbiological and molecular biology methods. Copyright © 2010 Society of Chemical Industry     

The effectiveness of thermal treatment for development of conductive metalized aramid fiber using supercritical fluid carbon dioxide—Fiber-metal adhesive strength improvement

The effect of thermal treatment to improve the metal adhesion into poly-(p-phenylene terephthalamide) (PPTA), e.g. aramid fiber, has been investigated. After palladium(II)-hexafluoroacetylacetonate metal complex, Pd(hfac)₂, seeding into the fiber using supercritical fluid carbon dioxide, scCO₂, a post-thermal treatment was conducted. As a result, after carrying out electroless copper plating, the adhesive strength between polymer substrate and copper layer greatly increased. Also, in order to have a better comprehension on decomposition reactions of Pd(hfac)₂ under supercritical conditions, remains of metal complex were analyzed using electron ionization mass spectrometry technique (EI-MS). EI-MS mass spectra derived from Pd(hfac)₂ gave us useful information about its dissociation reactions and reaction temperature under supercritical conditions. Additionally, to verify the Pd particles seeding in the fiber surface, X-ray photoelectron spectrometry (XPS) analyses were performed. The results confirmed that post-thermal treatment induced Pd particles diffusion and deeper penetration of Pd complex and its fragments into the fiber.     

Effect of Chemisorption and Physisorption of Water on the Surface Structure and Stability of alpha-Alumina

Chemisorption and physisorption of water onto the {0001}, {1011}, {1120}, and {2243} surfaces of alpha-alumina have been studied via atomistic simulation techniques, using potentials that have been verified against the structures of hydrated ß-alumina and diaspore. Both physisorption and chemisorption of all surfaces are energetically favorable, especially the hydroxylation of dipolar oxygen-terminated planes. The equilibrium morphology is calculated, as a way to assess the change in surface energies, and the equilibrium morphologies agree with the experimentally observed crystal morphologies. The calculated energies of both physisorption and chemisorption agree well with experimentally obtained hydration energies.     

Effects of docosahexaenoic acid on retinal development: Cellular and molecular aspects

We have recently shown that docosahexaenoic acid (DHA) is necessary for survival and differentiation of rat retinal photoreceptors during development in vitro. In cultures lacking DHA, retinal neurons developed normally for 4 d; then photoreceptors selectively started an apoptotic pathway leading to extensive degeneration of these cells by day 11. DHA protected photoreceptors by delaying the onset of apoptosis; in addition, it advanced photoreceptor differentiation, promoting opsin expression and inducing apical differentiation in these neurons. DHA was the only fatty acid having these effects. Mitochondrial damage accompanied photoreceptor apoptosis and was markedly reduced upon DHA supplementation. This suggests that a possible mechanism of DHA-mediated photoreceptor protection might be the preservation of mitochondrial activity; a critical amount of DHA in mitochondrial phospholipids might be required for proper functioning of these organelles, which in turn might be essential to avoid cell death. Müller cells in culture appeared to be involved in DHA processing: they took up DHA, incorporated in into glial phospholipids, and channeled it to photoreceptors in coculture. Both Müller cells, when cocultured with neuronal cells, and the glial-derived neurotrophic factor (GDNF) protected photoreceptors from cell death. These results suggest that glial cells may play a central role in regulating photoreceptor survival during development through the provision of trophic factors. The multiple effects of DHA on photoreceptors suggest that in addition to its structural role, DHA might be one of the trophic factors required by these cells.     

Use of durum residue flour,a lower value product of durum milling,by incorporation into wheat flour dough without deterioration in baking quality

BACKGROUND: During the milling of durum wheat to semolina, about 10–15% of total products produced is residue flour, a lower value product than the semolina. This study investigated the potential for using the durum residue flour as an additive in bread‐making to improve its potential commercial value. RESULTS: Incorporation of residue durum flour from 102 breeding lines into a low protein flour and standard bakers' flour at 20% incorporation improved the bake loaf volume with minimal change in Mixograph dough mixing time and peak resistance in many of the lines tested. Loaf yellow b was always increased even with only a 10% incorporation. Baking flours can tolerate 20% incorporation with no deleterious affects on loaf volume and bake score. CONCLUSION: The results show a potential for using the lower value durum residue flour for baking bread of acceptable quality with a slightly higher yellow colour. This would improve the profitability for the miller and provide alternative ingredients to the baker for preparing specialty breads. Copyright © 2008 Crown in the Right of the State of New South Wales and Society of Chemical Industry     

Awareness of coeliac disease and the gluten status of ‘gluten‐free’ food obtained on request in catering outlets in Ireland

The only current effective treatment for coeliac disease (CD) is a lifelong diet that is as free from gluten as possible. This study provides baseline evidence to inform future interventions of benefit to CD sufferers by examining awareness of CD issues by food servers and preparation staff, assessing their claims to provide gluten‐free foods by analysis of a meal concurrently sampled. While the majority of attempts to purchase a ‘gluten‐free’ meal on request in restaurants were successful, some 10% of all samples contained gluten, 2.7% between 21 and 100 mg kg^?1, and 7.7% >100 mg kg^?1 and two unsatisfactory samples were purchased from so‐called coeliac‐friendly restaurants. These findings were consistent with those obtained previously by Collin et al. [Alimentary Pharmacology & Therapeutics 19 (2004) 1277], Størsrud et al. [European Food Research & Technology 217 (2003) 481], Gélinas et al. [International Journal of Food Science & Technology 43 (2008) 1245] for cross contamination with gluten. Staff confidence, ‘gluten‐free’ notices, signs and menu choices were no guarantee of risk‐free dining for CD sufferers. Based on our findings we suggest the need for further training, specifically for chefs and managers.     

Vertical dynamics of the Maglev vehicle Transrapid

The Maglev vehicle Transrapid is levitated by magnetic forces which pull the vehicles levitation frames toward the guideway from below. The magnets possess poles with alternating fluxes which are part of the synchronous long stator linear motor. Although the Transrapid glides along its guideway without mechanical contact, this alternation as well as the loading and unloading of the guideway girders excite vibrations of the ground. In order to calculate the time behavior of the vibrational emissions, a simulation of the transfer of a Transrapid vehicle over several guideway girders is proposed. The equations of motion for the vehicle and the girders are calculated separately by the MBS software NEWEUL and assembled and numerically integrated in MATLAB/SIMULINK. The control law for the magnet forces is simplified by the characteristics of linear spring-damper elements. The controlled magnet forces travel along the guideway continuously and include the dynamic component due to the alternating fluxes and the geometry of the poles and stator. Results of a complete vehicle moving along a guideway consisting of several girders can be obtained within a few minutes of computation time. Therefore, the mechanism of excitations can be analyzed by numerical time integration in the full state space. The results are validated by measurements of the forces in the joints of the guideway girders. The vibrational emission along the Transrapid guideway differs from the vibrations of contact-afflicted vehicles as no impacts and fewer stochastic effects occur.     

Phase decomposition upon alteration of radiation-damaged monazite-(ce) from moss, Østfold, norway

The internal textures of crystals of moderately radiation-damaged monazite-(Ce) from Moss, Norway, indicate heavy, secondary chemical alteration. In fact, the cm-sized specimens are no longer mono-mineral monazite but rather a composite consisting of monazite-(Ce) and apatite pervaded by several generations of fractures filled with sulphides and a phase rich in Th, Y, and Si. This composite is virtually a 'pseudomorph' after primary euhedral monazite crystals whose faces are still well preserved. The chemical alteration has resulted in major reworking and decomposition of the primary crystals, with potentially uncontrolled elemental changes, including extensive release of Th from the primary monazite and local redeposition of radionuclides in fracture fillings. This seems to question the general alteration-resistance of orthophosphate phases in a low-temperature, 'wet' environment, and hence their suitability as potential host ceramics for the long-term immobilisation of radioactive waste.     

Effect of laser microcutting on thermo-mechanical properties of NiTiCu shape memory alloy

The machining of shape memory alloys (SMAs), such as NiTi based alloys, is a very interesting and relevant topic for several industrial applications in the biomedical, sensor and actuator fields. Laser technology is one of the most suitable methods for the manufacturing of products in the aforementioned fields, mainly when small and precise features have to be included. Due to the thermal nature of this process, study of its effect on the functional properties of these materials is needed. Except for binary NiTi, few results on the laser machining of NiTi based alloys are available in the literature. In this work, thin sheets of Ni40Ti50Cu10 (at.%) were processed by a fibre laser and the effect of process speed on the material properties was analysed. Scanning electronic microscopy was adopted for observation of the laser cut edges’ morphology. Chemical composition of the processed material was evaluated by energy dispersion spectroscopy and nanohardness measurements were used to estimate the heat affected zone. SMA functional properties were studied on both base and laser machined material. These characteristics are affected by laser machining for the presence of melted material; this effect can be minimised by increasing the laser process speed.