New type of tin support for hydroprocessing catalyst

TiN supported molybdenum sulfide catalysts showed much higher activity for cleavage of C-C bonds than oxide supported molybdenum sulfide catalysts, indicating the possibility of a new generation of supports for hydroprocessing catalysts.     

Chaos in parametric resonance flow at water-mercury interface

In the electrochemical system with liquid-liquid interface, intense local convections by the resonance with potential pulses take place. Therefore, with laser beam scattering, temporal movement of the water-mercury interface was observed. As a result, the scattering efficiency showed non-linear oscillation.

Such non-linear response could be controlled by potential pulse height. As the potential height was increased, new scattering peaks in the oscillation emerged, which was expected of a kind of bifurcation phenomenon. From these results, phase portrait, Poincarè section, correlation dimension of the strange attractor and the largest Lyapunov exponent of the trajectories were obtained. Consequently, it was concluded that all the parameters indicate chaotic behavior of the resonance flow.     

Low-temperature selective reduction of NO with propene over alkaline-exchanged mordenites

Partially protonated alkaline mordenites showed higher activity per acid amount below 573 K than acidic zeolites for the selective reduction of NO with C₃H₆ in the presence of O₂, which can be related to a high concentration of NO₃ ^- species in the zeolite channels. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal decomposition of uranium peroxide hydrates

The thermal decomposition of uranium peroxide hydrates, UO₄·4H₂O and UO₄·2H₂O, has been investigated by thermal analyses, X-ray diffraction study and infrared spectroscopy. As a result, it is concluded that the thermal decomposition of uranium peroxide hydrates proceeds in the following sequence: where 3 ≤ x ≤ 3.5.     

Preparation of gelatinous aluminium hydroxide by urea from aqueous solutions containing chloride,nitrate and sulphate of aluminium

The preparation of gelatinous aluminium hydroxide from aqueous solutions containing a mixture of the chloride, nitrate or sulphate of aluminium and urea by heating at 95°C has been investigated under different conditions. The pH value of aqueous solutions, on heating for a given period of time, gradually increases, rises steeply at pH 4.0–7.5 and finally approaches a constant value. The precipitate appears at about pH 7 in the presence of chloride or nitrate ions and about pH 4 in the presence of sulphate ions. Although the gelatinous precipitates in the chloride and nitrate systems are apparently different from the granular, filterable one in the sulphate system, their compositions are not influenced by the species of aluminium salt. The fresh precipitates exist in an amorphous state, and go to pseudoboehmite by ageing. It seems that the amount of pseudoboehmite increases as the concentration of aluminium salt in aqueous solution decreases. However, the transformation from amorphous aluminium hydroxide to pseudoboehmite is reduced in the presence of sulphate ions. Furthermore, it is found that the X-ray diffraction peak for the (200) plane, as an orthorhombic structure, in the pseudoboehmite precipitated from chloride or nitrate solution is more intense than that from sulphate solution.     

Catalyst Design of Pt-Modified Ni/Al2O3 Catalyst with Flat Temperature Profile in Methane Reforming with CO2 and O2

Pt(0.3)/Ni(10)/Al₂O₃, prepared by a sequential impregnation method, exhibited a more excellent performance in methane reforming with CO₂ and O₂ in terms of the catalytic activity and the temperature profile of the catalyst bed than Pt(0.3) + Ni(10)/Al₂O₃ prepared by a coimpregnation method, Ni(10)/Al₂O₃, Pt(0.3)/Al₂O₃, and Pt(10)/Al₂O₃. It is thought that this is because the surface Pt atoms on Ni catalyst can contribute to the enhancement of the catalyst reducibility.     

Behavior Of Glyoxal During Granular Activated Carbon Treatment

Glyoxal, which was the strong mutagen formed by ozonation of humic substances, was treated with granular activated carbon (GAC) and the behavior of glyoxal was investigated. Glyoxal itself was adsorbed well on GAC at pH 5–7. But, glyoxal increased by GAC treatment of ozonated humic substances when the ozone dose was insufficient to decolorize the humic substances. The precursors of glyoxal may be among other ozonated products which may be changed to glyoxal on GAC.     

Application of the Solvothermal Process in the Synthesis of High-performance Ag/γ-Al_2O_3 Catalysts

1 INTRODUCTION Since Cu-ZSM-5 was reported as an effective catalyst for the selective catalytic reduction (SCR) of NO by hydrocarbons in the presence of excess oxygen, the SCR of NOx has received much attention as a kind of potential technology for cleaning NOx in various oxygen-rich exhausts of diesel engine, lean burning gasoline engine and gas engine. Although a number of catalysts have been tested, to date, it still seems to be difficult to find a catalyst that is completely suit…     

Gel polymer electrolyte based on poly(acrylonitrile-co-styrene) and a novel organic iodide salt for quasi-solid state dye-sensitized solar cell

A gel polymer electrolyte based on poly(acrylonitrile-co-styrene) as polymer matrix and N-methyl pyridine iodide salt as I⁻ source was prepared. Controlling the concentration of polymer matrix of poly(acrylonitrile-co-styrene) at 17.5 wt.%, mixing the binary organic solvents mixture ethylene carbonate and propylene carbonate with 6:4 (w/w), and the concentration of N-methyl pyridine iodide and iodine with 0.5 and 0.05 M, respectively, the gel polymer electrolyte attains the maximum ionic conductivity (at 30 °C) of 4.63 mS cm⁻¹. Based on the gel polymer electrolyte, a quasi-solid state dye-sensitized solar cell was fabricated and its overall energy conversion efficiency of light-to-electricity of 3.10% was achieved under irradiation of 100 mW cm⁻².     

Corrosion of silicon nitride ceramics under hydrothermal conditions

Corrosion behaviour of Si₃N₄ ceramics containing Y₂O₃, Al₂O₃ and AIN as sintering aids was investigated under hydrothermal conditions at 200–300 C and saturated vapour pressures of water for 1–10 days. Hydrothermal corrosion resulted in the dissolution of the Si₃N₄ matrix and the formation of a product layer consisting of the original grain-boundary phases and hydrated silica. The dissolution rate of Si₃N₄ ceramics decreased with decreasing crystallinity of the grain-boundary phase. The dissolution rate could be adequately described by a parabolic plot in the initial stage of the reaction. The apparent activation energies were 83.5–108 kJ mol^–1, and the bending strength of the corroded samples decreased from 600 to 400 MPa in the initial stage of the reaction upto a weight loss of 0.004 g cm^–2, and then was almost constant up to a weight loss of 0.012 g cm^–2.