Phase transformation and interface segregation behavior in Si3N4 ceramics sintered with La2O3–Lu2O3 mixed additive

Microstructure and mechanical property of silicon nitride (Si₃N₄) ceramic are strongly dependent on the selection of sintering additives. When rare‐earth (RE) oxide is used as the sintering additive, segregation of RE ions at interface between Si₃N₄ grain and intergranular glassy film (IGF) is believed to play a critical role. Although the ionic radius of RE ion is known to be an empirical parameter to modify the mechanical property, the correlation between the segregated ions and their ionic radii is still under controversy. In order to address this issue, (i) rate of α‐β phase transformation and (ii) segregation behavior at the interface were studied for Si₃N₄ ceramics sintered using mixture of La₂O₃ and Lu₂O₃ as additives in this study. Specimens of Lu content 30% and higher exhibited lower activation energies for the α‐β phase transformation as compared with those of Lu content 20% and lower. In terms of the segregation behavior, La was preferably segregated at one site and Lu at the other site along β‐Si₃N₄/IGF interface in the specimens of Lu content 30% and higher. It is understood from these results that Lu segregation site should be more closely related with grain growth.     

Active sites deterioration of MgCl2‐supported catalyst induced by the electron donor extraction by alkylaluminium

To investigate the role of the internal donor in a Ziegler–Natta catalyst, the nature and existing states of the internal donor were intentionally varied by alkylaluminium treatment before polymerization, and the catalytic properties during propene polymerization were accurately evaluated using the stopped‐flow method. A significant decrease in the amount of the remaining internal donor was observed during the initial stage of the extraction. The polymerization results show a gradual decrease in the polymer isotacticity with an increase in the extraction time. These different patterns, as a function of the extraction time, indicate that the amount of the remaining internal donor is not directly related to the isotacticity of the produced polymer. © 2002 Society of Chemical Industry     

Validation of Platelet Counting Accuracy With the Celltac F Automated Hematology Analyzer

Rapid and accurate analysis of platelet count plays an important role in evaluating hemorrhagic status. Therefore, we evaluated platelet counting performance of a hematology analyzer, Celltac F (MEK-8222, Nihon Kohden Corporation, Tokyo, Japan), that features easy use with low reagent consumption and high throughput while occupying minimal space in the clinical laboratory. All blood samples were anticoagulated with dipotassium ethylenediaminetetraacetic acid (EDTA-2K). The samples were stored at room temperature (18^{^}C–22^{^}C) and tested within 4 hours of phlebotomy. We evaluated the counting ability of the Celltac F hematology analyzer by comparing it with the platelet counts obtained by the flow cytometry method that ISLH and ICSH recommended, and also the manual visual method by Unopette (Becton Dickinson Vacutainer Systems). The ICSH/ISLH reference method is based on the fact that platelets can be stained with monoclonal antibodies to CD41 and/or CD61. The dilution ratio was optimized after the precision, coincidence events, and debris counts were confirmed by the reference method. Good correlation of platelet count between the Celltac F and the ICSH/ISLH reference method (r = 0.99, and the manual visual method (r= 0.93) were obtained. The regressions were y = 0.90 x+9.0 and y=1.11x+8.4, respectively. We conclude that the Celltac F hematology analyzer for platelet counting was well suited to the ICSH/ISLH reference method for rapidness and reliability.     

In situ X-ray diffraction of surface oxide on type 430 stainless steel in breakaway condition using synchrotron radiation

Changes in the crystal structure of type 430 stainless steel and the oxides on its surface were studied in situ at 1373 K using a high-intensity synchrotron X-ray source provided by SPring-8 in Japan. The surface of the steel was initially covered with Cr₂O₃, which was then converted to FeCr₂O₄, and finally Fe₃O₄ and Fe₂O₃ formed on it. These results indicated that the reason for the breakaway oxidation in type 430 stainless steel is Cr depletion beneath Cr₂O₃ layer and the subsequent ionisation of Fe, not the simple mechanical failure of Cr₂O₃.     

A novel hybrid adsorption heat pump water heater

A hybrid adsorption heat pump water heater has been studied for domestic use. It is a water heater with dual heat sources, and it combines the performances of adsorption heat pumps and conventional gas boilers. Moreover, functional adsorbent material‐zeolite (FAM‐Z02, Mitsubishi Chemicals) and water are a new adsorption pair for adsorption heat pumps. This article describes the operation, design, and performance analysis of one such water‐heating device. The experimental results showed that the hybrid water heater in the whole year has a stable COP even at low ambient temperature. The hybrid water heater can thus achieve high energy efficiency.     

Computational simulation of cold spray process assisted by electrostatic force

The integrated model of compressible thermofluid, splat formation and coating formation for the cold spray process has been established. In-flight behavior of nano-micro particles and the interaction between the shock wave and the particles in a supersonic jet flow impinging onto the substrate and further effect of electrostatic force on the particle acceleration are clarified in detail by carrying out a real-time computational simulation. The optimal particle diameters for an impinging particle velocity exceeding critical velocity exist. Particles with the diameter of submicron interact with shock wave and particles are decelerated prior to the impact. However, the particles can be accelerated considerably by utilizing electrostatic forces even in the presence of unavoidable shock waves. Finally, based on the integrated model, the coating thickness in an electrostatic assisted cold spray process is evaluated.     

The excellent water-solubility of N-[3-(dimethyl-amino)propyl] docosanamide chloride : the most eco-friendly cationic hair conditioning agent

A new hair-conditioning agent, N-[3-(dimethylamino)propyl]docosanamide (APA-22) hydrochloric acid salt (APA-22 HCl), has excellent solubility in water with a solubility limit over 10-times larger than that of other APA hydrochloric salts with shorter alkyl chain lengths. The physicochemical characteristics of APA-22 HCl were studied at 25 degrees C by using equilibrium surface tension (gamma), solubilization of an oil-soluble dye, steady-state fluorescence, and chloride ion selective electrode techniques. The APA-22 HCl salt is considered to form an aggregate at a concentration, C(1), which is about twice the concentration of the solubility limit of APAs with shorter alkyl chains. At a higher concentration, C(2), the aggregates of APA-22 HCl start forming another kind of aggregate, which is able to solubilize oil-soluble materials. That is, C(1) is considered to represent the critical aggregation concentration (cac) and C(2) a morphology transition. In the concentration region between C(1) and C(2) the solutions are seemingly transparent whereas at above C(2) they appear bluish or translucent. Since the Krafft point of APA-22 HCl is 55 degrees C, all the solutions, including the aggregates, are thought to exist in metastable states. Notably, however, these metastable solutions do not change significantly over a few months. The excellent solubility of APA-22 HCl in water is considered to be a result of this unique stepwise aggregation with increasing concentration.     

In-process measurement of topography change of grinding wheel by using hydrodynamic pressure

This paper deals with an in-process measurement method for topography change of a grinding wheel, which can apply to wet grinding. A pressure sensor is set beside a grinding wheel with a small gap. When grinding fluid is dragged into the gap, hydrodynamic pressure, which corresponds to the gap length and the topography, can be measured. This method is applied to a cylindrical grinding machine. No electromagnetic properties of a workpiece and a grinding wheel affect measured results. The pressure is decreased with the increase of the gap length when the grinding fluid is supplied in the tangential direction of the grinding wheel. Spectra of the pressure are measured with an FFT analyzer. Higher frequency components are increased with the progress of grinding because of turbulent flow. Loading and dulling of a grinding wheel can be detected by the proposed method as well as its wear.     

Preparation of Carbon-Doped TiO2 Nanopowder Synthesized by Droplet Injection of Solution Precursor in a DC-RF Hybrid Plasma Flow System

Carbon-doped titanium dioxide nanopowder has received much attention because of its higher photocatalytic performance, which is practically activated not only by UV, but also by visible light irradiation. In the present study, C-TiO₂ nanopowder was synthesized by droplet injection of solution precursor in a DC-RF hybrid plasma flow system, resulting in higher photocatalytic performance even under visible light irradiation. In-flight C-TiO₂ nanoparticles reacted with the high concentration of carbon in plasma flow and were then deposited on the surfaces of two quartz tubes in the upstream and downstream regions of this system. The collected C-TiO₂ nanopowder contained anatase-rutile mixed-phase TiO₂ and TiC, the contents of which depended on the location of the powder collection, the temperature, and the duration of plasma treatment. Highly functional C-TiO₂ nanopowder collected in the downstream region exhibited a higher degradation rate of methylene blue than that of single-phase anatase TiO₂, even under visible light irradiation, in spite of being TiC.     

IL-10 in Mast Cell-Mediated Immune Responses: Anti-Inflammatory and Proinflammatory Roles

Mast cells (MCs) play critical roles in Th2 immune responses, including the defense against parasitic infections and the initiation of type I allergic reactions. In addition, MCs are involved in several immune-related responses, including those in bacterial infections, autoimmune diseases, inflammatory bowel diseases, cancers, allograft rejections, and lifestyle diseases. Whereas antigen-specific IgE is a well-known activator of MCs, which express FcεRI on the cell surface, other receptors for cytokines, growth factors, pathogen-associated molecular patterns, and damage-associated molecular patterns also function as triggers of MC stimulation, resulting in the release of chemical mediators, eicosanoids, and various cytokines. In this review, we focus on the role of interleukin (IL)-10, an anti-inflammatory cytokine, in MC-mediated immune responses, in which MCs play roles not only as initiators of the immune response but also as suppressors of excessive inflammation. IL-10 exhibits diverse effects on the proliferation, differentiation, survival, and activation of MCs in vivo and in vitro. Furthermore, IL-10 derived from MCs exerts beneficial and detrimental effects on the maintenance of tissue homeostasis and in several immune-related diseases including contact hypersensitivity, auto-immune diseases, and infections. This review introduces the effects of IL-10 on various events in MCs, and the roles of MCs in IL-10-related immune responses and as a source of IL-10.