Continuous monitoring of the dynamic behavior of a high‐rise telecommunications tower

This article describes the experimental evaluation of the dynamic effects induced by wind on a high‐rise telecommunications tower based on a permanent monitoring system. Monte da Virgem telecommunications tower is located near the city of Porto (Portugal), and its structure consists in a reinforced concrete shaft and a steel mast, with a total height of 177 m. The monitoring system includes accelerometers, anemometers, and a meteorological station, allowing the characterization of the maximum accelerations of the structure and wind regimes during a period of 6 months. The analysis of the results enabled identifying specific events, denominated as critical events, for which the dynamic response of the tower under wind actions appears significantly amplified due to wind aeroelastic instability phenomena in the steel mast. The automatic identification of the critical events was based on the application to the acceleration's records of an autoregressive model and estimation of its optimal order number based on a singular value decomposition. The results proved the robustness and efficiency of the proposed technique in identifying the number, duration, and maximum amplitude of accelerations associated to the critical events, envisaging its potential integration in structural health monitoring systems.     

Copper‐Catalyzed Trifluoromethylation of Aliphatic N‐Arylhydrazones: A Concise Synthetic Entry to 2‐Trifluoromethylindoles from Simple Aldehydes

The copper‐catalyzed C(sp²) H trifluoromethylation of N,N‐disubstituted hydrazones using the Togni reagent is demonstrated to proceed efficiently for aliphatic aldehyde‐derived substrates. The success of the reactions relied on the choice of the N,N‐diphenylamino group as the terminal hydrazone amino group where N,N‐dialkylamino groups were preferred for (hetero)aromatic aldehyde‐derived substrates. In addition, the trifluoromethylated N‐arylhydrazones are shown to be ideal substrates for Fischer indole synthesis allowing a straightforward, three‐step access to 2‐trifluoromethylindole derivatives from simple aldehydes.

     

Recyclable,Flexible, Low‐Power Oxide Electronics

The ability to process and dimensionally scale field‐effect transistors with and on paper and to integrate them as a core component for low‐power‐consumption analog and digital circuits is demonstrated. Low‐temperature‐processed p‐ and n‐channel integrated oxide thin‐film transistors in the complementary metal oxide semiconductor (CMOS) inverter architecture are seamlessly layered on mechanically flexible, low‐cost, recyclable paper substrates. The possibility of building these circuits using low‐temperature processes opens the door to new applications ranging from smart labels and sensors on clothing and packaging to electronic displays printed on paper pages for use in newspapers, magazines, books, signs, and advertising billboards. Because the CMOS circuits reported constitute fundamental building blocks for analog and digital electronics, this development creates the potential to have flexible form factor computers seamlessly layered onto paper. The holistic approach of merging low‐power circuitry with a recyclable substrate is an important step towards greener electronics.     

Numerical Modelling of Thin-Walled Stainless Steel Structural Elements in Case of Fire

In this paper, the structural response of stainless steel thin-walled elements submitted to fire is analysed numerically by means of the geometrically and materially non-linear Finite Element program SAFIR, including imperfections. In order to make these simulations, two main changes in the program were made: (i) the code was changed in order to deal with the stainless steel 2D material constitutive law to be used with shell elements and (ii) the possibility of the program to take into account residual stresses with shell finite elements was introduced. The stainless steel stress–strain relationship at high temperatures was based on the one presented in part 1.2 of Eurocode 3. To model the strain hardening exhibited by the stainless steels, using the shell element formulation, an approximation to the Eurocode 3 constitutive law was needed. Local and global geometrical imperfections were considered in the simulations. The paper shows the influence of the residual stresses on the ultimate load-carrying capacity of thin-walled stainless steel structural elements in case of fire.     

Analysis of phenolic compounds in cork from Quercus suber L. by HPLC–DAD/ESI–MS

The aim of the present work was to identify the extractable phenolic compounds present in cork from Quercus suber L. The structures of thirty three compounds were tentatively identified by liquid chromatography coupled to electrospray ionisation mass spectrometry (HPLC–DAD/ESI–MS). The majority of those compounds were gallic acid derivatives, in the form of either galloyl esters of glucose (gallotannins), combinations of galloyl and hexahydroxydiphenoyl esters of glucose (ellagitannins), dehydrated tergallic-C-glucosides or ellagic acid derivatives. Others were found to correspond to low molecular weight phenolic compounds, like acids and aldehydes. Mongolicain, a flavanoellagitannin in which hydrolysable tannin and flavan-3-ol moieties are connected through a carbon–carbon linkage, was also detected in cork from Q. suber L. The results illustrate the rich array of phenolic compounds present in cork.     

On the use of the transmissibility concept for the evaluation of frequency response functions

The dynamic characteristics of a structure are often derived from a set of measured frequency response functions (FRFs). However, it may happen that the measurement of certain FRFs is impossible, as they are related to some points of interest that may become physically inaccessible in operational conditions. In this circumstance, it is useful to have some tools that can provide the prediction of such dynamic information. The transmissibility concept can play an important role to circumvent these situations. In fact, there are important properties associated to the transmissibility—the relationship between two sets of responses, for a given set of applied forces, extended to a general multiple degree-of-freedom system. In this paper, some important properties of the transmissibility matrix will be presented. Additionally, it will be shown that if a modification is operated on the original system - using both theoretical and experimental models - it is possible to estimate the FRFs associated to the unknown co-ordinates, without the necessity of measuring the responses on those co-ordinates.     

Methods for automatic and assisted image annotation

Personal memories composed of digital pictures are very popular at the moment. To retrieve these media items annotation is required. During the last years, several approaches have been proposed in order to overcome the image annotation problem. This paper presents our proposals to address this problem. Automatic and semi-automatic learning methods for semantic concepts are presented. The automatic method is based on semantic concepts estimated using visual content, context metadata and audio information. The semi-automatic method is based on results provided by a computer game. The paper describes our proposals and presents their evaluations.     

Olfactory coordinated area coverage

This paper proposes an olfaction based methodology to automatically cover an unknown area enabling the decoupled cooperation of a group of floor cleaning mobile robots. This method is based on the utilisation of low cost chemical sensors in cleaning mobile robots, in order to differentiate clean from dirty areas. The experimental results show that the use of olfactory capabilities allows to efficiently cover and clean a certain area, and demonstrate the possibility of coordinating several mobile robots without the need of expensive sensing capabilities, map building or complex algorithms for task scheduling.     

Low complexity Byzantine-resilient consensus

The application of the tolerance paradigm to security - intrusion tolerance - has been raising a reasonable amount of attention in the dependability and security communities. In this paper we present a novel approach to intrusion tolerance. The idea is to use privileged components - generically designated by wormholes - to support the execution of intrusion-tolerant protocols, often called Byzantine-resilient in the literature.The paper introduces the design of wormhole-aware intrusion-tolerant protocols using a classical distributed systems problem: consensus. The system where the consensus protocol runs is mostly asynchronous and can fail in an arbitrary way, except for the wormhole, which is secure and synchronous. Using the wormhole to execute a few critical steps, the protocol manages to have a low time complexity: in the best case, it runs in two rounds, even if some processes are malicious. The protocol also shows how often theoretical partial synchrony assumptions can be substantiated in practical distributed systems. The paper shows the significance of the TTCB as an engineering paradigm, since the protocol manages to be simple when compared with other protocols in the literature.Published online: 29 October 2004This work was partially supported by the EC, through project IST-1999-11583 (MAFTIA), and by the FCT, through the Large-Scale Informatic Systems Laboratory (LASIGE) and projects POSI/1999/CHS/33996 (DEFEATS) and POSI/CHS/39815/2001 (COPE).     

Shotgun protein sequencing by tandem mass spectra assembly

The analysis of mass spectrometry data is still largely based on identification of single MS/MS spectra and does not attempt to make use of the extra information available in multiple MS/MS spectra from partially or completely overlapping peptides. Analysis of MS/MS spectra from multiple overlapping peptides opens up the possibility of assembling MS/MS spectra into entire proteins, similarly to the assembly of overlapping DNA reads into entire genomes. In this paper, we present for the first time a way to detect, score, and interpret overlaps between uninterpreted MS/MS spectra in an attempt to sequence entire proteins rather than individual peptides. We show that this approach not only extends the length of reconstructed amino acid sequences but also dramatically improves the quality of de novo peptide sequencing, even for low mass accuracy MS/MS data.