Immunoscintigraphy of bone sarcomas--results in 5 patients

The feasibility of using the murine monoclonal antibody, TP-1, for clinical immunoscintigraphy was examined in a pilot study involving 5 patients with bone sarcomas. 131I-labelled F(ab')2 antibody fragments were injected in doses of 0.8-1.0 mg (90-130 MBq), and the accumulation of radioactivity was examined by scintigraphy, and assessed by direct measurements on biopsied tumour and normal tissue. One osteosarcoma patient had a primary tumour in the femur, whereas the other 4 had single lung metastases detected by other diagnostic methods. Immunoscintigraphy of the femoral primary was optimally visualised after 22 h. In 2 patients, the method failed to detect lung metastasis, in 1 of the cases possibly related to less than optimal methodological conditions. In 2 other patients, increased accumulation of radioactivity indicated one and three lung tumours, in addition to the single metastasis observed by X-ray and CT scanning, tumours that were later confirmed and removed surgically. The concentration of radioactivity in tumour and normal tissues 44-72 h after antibody injection could be measured in 4 patients. The tumour to blood ratios were in the range of 1.2-4.2, compared to 0.1-0.8 for various normal tissues. The results indicate that immunoscintigraphy with TP-1 antibody fragments have a potential for early detection of lung metastases in patients with bone sarcoma.     

Measurement of the relative reduction of strip on the 1200-model temper-rolling mills in flat-rolled products shop No. 3

The temper-rolling mills in flat-rolled products shop No. 3 at the MMK has been equipped with the Vytyazhka automated system to measure the elongation of strip (ASEMS) rolled on the mill. The elongation (relative elongation) of the strip is determined through a frequency-based method of measuring the speed of the strip before and after reduction. The system transmits and displays information on the temper-rolling of each coil. The information is shown as a diagram on the monitor of an industrial computer. The reliability of the system allows it to be in continuous use. Introduction of the automated elongation measurement system makes it possible to monitor the reductions being made during temperrolling, which in turn enables the shop to reduce the number of products having properties that do not meet customers’ requirements. __________ Translated from Metallurg, No. 1, pp. 62–63, January, 2007.     

Corrosion resistance of a bent plate from a high-nitrogen nonmagnetic 05Kh22AG15N8M2F steel in aggressive media

The corrosion resistance of the convex and concave sides of bent plates from a high-nitrogen non-magnetic steel has been studied in aqueous solutions of sulfuric and hydrochloric acids. Weighing and hydrogen methods are used to control the corrosion rate of bent-sample sides and to find a number of effects that complement the picture of the stress corrosion of iron alloys and support the existence of the mechanochemical deformation sign effect.     

Simulation and experimental analyses of electromagnetic transients behaviors of lightning surge on vertical conductors

Simulation of very fast surge phenomena in a three-dimensional (3-D) structure requires a method based on Maxwell's equations, such as the finite-difference time-domain (FDTD) method or the method of moments, because circuit-equation-based methods cannot handle the phenomena. This paper uses a method of thin-wire representation of the vertical conductor system for the FDTD method which is suitable for the 3-D surge simulation. The thin-wire representation is indispensable to simulate electromagnetic surges on wires or steel frames in which the radius is smaller than a discretized space step used in the FDTD simulation. In this paper, a general surge analysis program named the virtual surge test lab based on the Maxwell's equations formulated by the FDTD method, is used to simulate the surge phenomena of a vertical conductor, including the effects of horizontal wave incidence and vertical wave incidence. Experimental results on the reduced scale model have been presented in order to compare among the simulation results by the FDTD method and the results using numerical electromagnetic code based on the MoM.     

Principles of reference-aided decision making

A unified approach to decision making with extremal many-criteria models, expert estimates, and voting is developed on the basis of reference and distance concepts and taxonomy methods. It involves the solution of many-criteria problems with the Pareto optimum. Examples demonstrating the effectiveness and universality of the approach are given.     

Radiation demineralised bone enhanced osteoinductive capacity after transplantation

Using a mediating alkyne gas during the radiation treatment prevents the degradation of natural and synthetic polysaccharides and proteins. The product has higher viscosity and is more elastic than the original material and, therefore, gives enhanced functionality. Protein, within demineralised bone, too can be modified to give enhanced osteoinductive capacity after transplantation. Thus new functionalities can be achieved from the new products produced in food and medical products.     

All-optical phase-independent logic elements based on phase shiftinduced by coherent soliton collisions

We demonstrate, for the first time to our knowledge, that a fast coherent collision between two Kerr spatial solitons can give rise to a significant phase shift for both interacting beams. The maximal collision-induced phase shift ≈π rad takes place when the amplitudes of the solitons are equal (η₁=η₂) and the length of the interaction zone is comparable with a soliton phase period. Depending on the ratio η₂/η₁, and the collision angle between the solitons, the magnitude of the phase shift can be varied within a reasonable range, for example from 180° to 40°. The analysis of the effect performed by the finite-difference beam-propagation method has shown that it is insensitive to the initial phase difference between the incident beams (δ_i), even in the case when η ₁≠η₂. It has been demonstrated that the phenomenon can be used for all-optical three-soliton logic elements, which are capable of providing more than 3-dB signal amplification and possess bi -independent output characteristics     

Microwave beam imaging by recombination continuum from the positive column of gas discharge in a cesium vapor-xenon mixture

A new sensitive method for imaging of the spatial distribution of microwave intensity is proposed. The method is based on the imaging of the 6P-recombination continuum of cesium, emitted from a nonequilibrium plasma of the positive column of gas discharge in a cesium vapor-xenon mixture. It is demonstrated that the spatial distribution of intensity of 35-GHz microwave radiation measured by this method in a focal plane of a lens well coincides with the pattern obtained with the aid of a movable microwave detector. The time resolution of the proposed microwave imaging system reaches 1 ms.