Antibacterial modification of nylon-6 nanofibers: structure,properties and antibacterial activity.

Antibacterial nylon 6 (PA6) nanofibers have been prepared in one-step procedure using Nanospider technology. Chlorhexidine (CHX), 1-dodecyltrimethylamonium bromide (DTAB) and benzyltrimethylamonium bromide (BTAB) have been used as antibacterial agents. Samples were characterized by a series of analytical and testing methods to investigate the surface chemistry, zeta potential, structure, morphology, phase composition, mechanical properties and antibacterial activity. Experimental characterization has been combined with molecular modeling to analyze the interaction of nanofibers with modifying molecules for better understanding the effect of nanofibers modification on their properties. Antibacterial modification of PA6 led to significant changes of zeta potential (from -31 mV for PA 6 up to -49 mV for PA6/BTAB), changes in phase composition (decrease of alpha phase content and increase of gamma phase content for PA6/BTAB and PA6/CHX) and to significant increase of fiber diameter for PA6/BTAB. Antibacterial modification resulted in the straightening of nanofibers and to higher permeability of nanofiber textile for all investigated samples. Tensile tests showed the the increase of Young modulus for all the investigated samples. All the modified samples: PA6/DTAB, PA6/BTAB and PA6/CHX exhibit good antibacterial activity.     

Direct evidence of oxygen evolution from Li1+ x (Ni1/3Mn1/3Co1/3)1? x O2 at high potentials

Li_1+x (Ni_1/3Mn_1/3Co_1/3)_1−x O₂ (NMC) oxides are among the most promising positive electrode materials for future lithium–ion batteries. A voltage “plateau” was observed on the first galvanostatic charging curve of NMC in the extended voltage region positive to 4.5 V vs. Li/Li⁺ for compounds with x > 0 (overlithiated compounds). Differences were observed in the cycling stability of the overlithiated and stoichiometric (x = 0) NMC oxides in this potential region. A differential plot of the charge vs. potential profile in the first cycle revealed that, for the overlithiated compounds, a large irreversible oxidative peak arises positive to 4.5 V vs. Li/Li⁺, while in the same potential region only a small peak due to the electrolyte oxidation is detected for the stoichiometric material. Differential Electrochemical Mass Spectrometry (DEMS) was used to investigate the high voltage region for both compounds and experimental evidence for oxygen evolution was provided for the overlithiated compounds at potentials positive to 4.5 V vs. Li/Li⁺. No oxygen evolution was detected for the stoichiometric compound.     

The effect of microstructure on hydrogen permeability of high strength steels

Hydrogen diffusivity and trapping have been studied in two advanced high strength steel grades and model samples using electrochemical permeation test. Microstructures of CP1000 and DP1000 steels consist of ferrite, martensite and a small fraction of retained austenite. In addition, bainite is present in CP1000. Model phases with predominance of a particular phase have been prepared by specific heat treatment. DP1000 has shown the lowest diffusivity among all materials, while ferritic model sample has shown the highest. Differences in hydrogen diffusion coefficient values are linked to trapping microstructural characteristics and grain size.     

Naming and identification of tastes in aqueous solutions.

Several taste substances were tested in aqueous solutions; tannic and tartaric acids were found unsuitable as a standard substance for the taste identification. Monosodium glutamate, sodium hydrogen carbonate and potassium chloride were often identified as salty substances even when the subjects were able to distinguish between the tastes. They probably identified the taste as salty owing to the lack of proper terms, and unsufficient experience with tasting monosodium glutamate and sodium hydrogen carbonate as substances possessing defined tastes different from the salty taste.     

Model-based low-level control in flexible manufacturing systems

Low-level (supervisory) control of flexible manufacturing systems (FMS) assures conflict-free operation and enforces production requirements such as priorities. It forms a crucial link between medium and higher-level decision making, on the one hand, and the various machine-controllers and servomechanisms on the other. In the absence of a suitable control methodology, ad hoc development is the current practice and compromised results at high cost are far too common. Here we described a model-based framework for a new, systematic approach to supervisory control.     

Benzene physical and chemical organogels: Effect of network scaffolding on the thermodynamic behavior of entrapped solvent molecules

This paper presents a thermodynamic investigation of the benzene physical and chemical organogels, using differential scanning calorimetry (DSC) and intends to draw an appropriate relationship between the gel network structure and the properties. Physical gels, formed by an aluminium soap of fatty acid, and chemical gels, created by in situ cross‐linking of a siloxane copolymer are investigated. The effects of the type and quantity of the gelators and their corresponding network mesh size distribution in the gels on crystallization, melting, and their kinetics are examined. It appears that the kinetics of crystallization of the entrapped solvent is significantly affected by the quality of the gel network scaffolding and can be treated successfully by the Avrami equation of crystallization. From the melting behavior of the entrapped solvent crystallites, quantitative information about the number of solvent molecules bound per molecule of the gelator has been extracted. DSC proves to be a reliable technique to evaluate the population distribution of solvent molecules trapped in the physical and chemical organogel network scaffolding. The state of the solvent may be treated as a probe to understand the structure of the gels. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1253–1264, 2004     

Anisotropic Magnetoresistance of GaMnAs Ferromagnetic Semiconductors

The angular dependence of the magnetoresistance has been studied for two sets of samples: annealed and hydrogenated, respectively. Different behavior of magnetoresistance anisotropy has been discussed in terms of change of scattering rate and/or introduction of strain during treatment.