CONJUGATE HEAT AND MASS TRANSFER IN CONVECTIVE DRYING OF MULTIPARTICLE SYSTEMS. PART I: THEORETICAL CONSIDERATIONS

This is the first of two papers concerning conjugate transport in convective drying of multiparticle systems. In this study, a methodology for the solution of conjugate transport problems is proposed. The theoretical aspects and relevant assumptions are briefly discussed and the results for convective heat and mass transfer in assemblages of spheres are presented. It is shown that both heat and mass transfer rates for an assemblage of two spheres in tandem arragement are significantly different from those of a single sphere case, and that care should be taken when modeling multiparticle systems by means of single-particle analysis.     

光纤复合架空地线(OPGW)雷击试验及分析

就IEC 60794．4．1标准所描述的雷击试验要求，对不同OPGW光缆设计进行了研究，并分析了雷击对不同OPGW缆型的影响。提高连续电流——组成部分C(最具破坏性的部分)的电荷转移量，光缆的残余抗拉强度将随之降低。当电荷转移量大于100C时，光缆被损坏程度更多地取决于光缆的直径而不是外层绞线的直径。试验结果表明，为了设计出可靠并经济的OPGW光缆，我们必须综合考虑OPGW的机械性能和依据安装地的年雷暴日水平所必需的抗雷击性能。     

Detailed modeling of the video signal and optimal readout of charge-coupled devices

This article provides a practical design methodology to calculate an optimal filter for noise reduction in the readout of charge-coupled devices (CCDs) taking into account the charge transfer and feedthroughs due to capacitive coupling in the CCD. A detailed analysis of the dynamics of the video signal and charge transfer is presented, including the circuital modeling of the output stage of the CCD and the dynamics of the electronics in the video chain before the analog-to-digital (AD) converter. This model is used to compute an optimal filter that minimizes the variance of the pixel noise and uses the samples of the charge transfer, before the charge is fully settled. This is necessary to enhance the performance of previous results that also use optimal filters but do not use the transition samples, while also reducing the pixel readout time, resulting in faster readouts. As a proof of concept for the optimal filter, we present novel experimental results using a Skipper CCD, which has a floating sense node that allows to measure the charge packet an arbitrary number of times. However, this technique can be applied to any CCD that has a readout system that digitally samples the video signal.     

Analytical and numerical analysis of phase and amplitude errors in the performance of arrayed waveguide gratings

The closed expression of the mean power transfer function for an arrayed waveguide grating (AWG), taking into account fabrication errors, is presented. Comparison with numerical simulations using a previous Fourier optics modeling show good agreement. The procedure to predict the AWG floor level using the numerical modeling is presented and checked against the analytical derived expressions.     

A Secreted Chorismate Mutase from Xanthomonas arboricola pv. juglandis Attenuates Virulence and Walnut Blight Symptoms

Walnut blight is a significant above-ground disease of walnuts caused by Xanthomonas arboricola pv. juglandis (Xaj). The secreted form of chorismate mutase (CM), a key enzyme of the shikimate pathway regulating plant immunity, is highly conserved between plant-associated beta and gamma proteobacteria including phytopathogens belonging to the Xanthomonadaceae family. To define its role in walnut blight disease, a dysfunctional mutant of chorismate mutase was created in a copper resistant strain Xaj417 (XajCM). Infections of immature walnut Juglans regia (Jr) fruit with XajCM were hypervirulent compared with infections with the wildtype Xaj417 strain. The in vitro growth rate, size and cellular morphology were similar between the wild-type and XajCM mutant strains, however the quantification of bacterial cells by dPCR within walnut hull tissues showed a 27% increase in XajCM seven days post-infection. To define the mechanism of hypervirulence, proteome analysis was conducted to compare walnut hull tissues inoculated with the wild type to those inoculated with the XajCM mutant strain. Proteome analysis revealed 3296 Jr proteins (five decreased and ten increased with FDR ≤ 0.05) and 676 Xaj417 proteins (235 increased in XajCM with FDR ≤ 0.05). Interestingly, the most abundant protein in Xaj was a polygalacturonase, while in Jr it was a polygalacturonase inhibitor. These results suggest that this secreted chorismate mutase may be an important virulence suppressor gene that regulates Xaj417 virulence response, allowing for improved bacterial survival in the plant tissues.     

Sarcopenia: Etiology,Nutritional Approaches,and miRNAs

Sarcopenia, an age-related decline in skeletal muscle mass and function, dramatically affects the quality of life. Although there is a consensus that sarcopenia is a multifactorial syndrome, the etiology and underlying mechanisms are not yet delineated. Moreover, research about nutritional interventions to prevent the development of sarcopenia is mainly focused on the amount and quality of protein intake. The impact of several nutrition strategies that consider timing of food intake, anti-inflammatory nutrients, metabolic control, and the role of mitochondrial function on the progression of sarcopenia is not fully understood. This narrative review summarizes the metabolic background of this phenomenon and proposes an integral nutritional approach (including dietary supplements such as creatine monohydrate) to target potential molecular pathways that may affect reduce or ameliorate the adverse effects of sarcopenia. Lastly, miRNAs, in particular those produced by skeletal muscle (MyomiR), might represent a valid tool to evaluate sarcopenia progression as a potential rapid and early biomarker for diagnosis and characterization.     

Development of a Topical Insulin Polymeric Nanoformulation for Skin Burn Regeneration: An Experimental Approach

Insulin is a peptide hormone with many physiological functions, besides its use in diabetes treatment. An important role of insulin is related to the wound healing process—however, insulin itself is too sensitive to the external environment requiring the protective of a nanocarrier. Polymer-based nanoparticles can protect, deliver, and retain the protein in the target area. This study aims to produce and characterize a topical treatment for wound healing consisting of insulin-loaded poly-DL-lactide/glycolide (PLGA) nanoparticles. Insulin-loaded nanoparticles present a mean size of approximately 500 nm and neutral surface charge. Spherical shaped nanoparticles are observed by scanning electron microscopy and confirmed by atomic force microscopy. SDS-PAGE and circular dichroism analysis demonstrated that insulin preserved its integrity and secondary structure after the encapsulation process. In vitro release studies suggested a controlled release profile. Safety of the formulation was confirmed using cell lines, and cell viability was concentration and time-dependent. Preliminary safety in vivo assays also revealed promising results.     

Influence of annealing on the permeation properties of a thermoplastic elastomer

The use of plastic films with specific diffusion or permeation properties for industrial applications has grown at a considerable rate. Some useful applications are found in medical devices, bioreactors, and combustible fuel storage where polymer films function as separation membranes that allow permeation of different gases at different rates. In this work, the permeation and diffusion properties of a polyester‐based thermoplastic polyurethane (TPU) were investigated. TPU injected and extruded specimens were subjected to thermal treatment (annealing) at 100°C for 20 h. Injected samples were exposed to certain hygrothermal conditions and films were prepared to evaluate the influence of annealing on the permeation of gases. In order to achieve a complete analysis, tests such as differential scanning calorimetry, tensile tests, and Fourier transform infrared spectroscopy were conducted to examine the morphological changes. These were then correlated to the TPU permeation behavior after annealing. Water uptake by the polymer—measured as weight gain—likely indicates an increase in the free volume in the amorphous domains. Similarly, in permeation and water immersion tests, the diffusion rate of gases and H₂O through the TPU was higher for the annealed samples when compared to those without treatment, indicating that diffusion within the polymer is dependent on the postprocessing thermal treatment. POLYM. ENG. SCI., 59:1810–1817, 2019. © 2019 Society of Plastics Engineers     

Selective synthesis of alcohols from syngas and hydroformylation of ethylene over supported cluster-derived cobalt catalysts

Hydroformylation of ethylene and CO hydrogenation were studied over cobalt-based catalysts derived from reaction of Co₂(CO)₈ with ZnO, MgO and La₂O₃ supports. At 433 K a similar activity sequence was reached for both reactions: Co/ ZnO > Co/La₂O₃ > Co/MgO. This confirms the deep analogy between hydroformylation and CO hydrogenation into alcohols. In the CO hydrogenation the selectivity towards alcohol mixture (C₁-C₃) was found to be near 100% at 433 K for a conversion of 6% over the Co/ZnO catalyst; this catalyst showed oxo selectivity higher than 98% in the hydroformylation of ethylene. Magnetic experiments showed that no metallic cobalt particles were formed at 433 K. It is suggested that the active site for the step that is common to both reactions is related to the surface homonuclear Co²⁺/[Co(CO)₄]^– ion-pairing species.     

Ocular movements under taskload manipulations: Influence of geometry on saccades in air traffic control simulated tasks

Traffic geometry is a factor that contributes to cognitive complexity in air traffic control. In conflict‐detection tasks, geometry can affect the attentional effort necessary to correctly perceive and interpret the situation; online measures of situational workload are therefore highly desirable. In this study, we explored whether saccadic movements vary with changes in geometry. We created simple scenarios with two aircraft and simulated a conflict detection task. Independent variables were the conflict angle and the distance to convergence point. We hypothesized lower saccadic peak velocity (and longer duration) for increasing complexity, that is, for increasing conflict angles and for different distances to convergence point. Response times varied accordingly with task complexity. Concerning saccades, there was a decrease of peak velocity (and a related increase of duration) for increased geometry complexity for large saccades (>15°). The data therefore suggest that geometry is able to influence “reaching” saccades and not “fixation” saccades. © 2011 Wiley Periodicals, Inc.