Impacts of altimeter corrections on local linear sea level trends around Taiwan

Multi-mission altimeter measurements from TOPEX, Jason-1, and Jason-2 satellite altimetry over the 1993–2009 time span are used to characterize the local linear sea level trend (LSLT) around Taiwan. The results show that the long-term changes of default geophysical and range corrections, i.e. the inverted barometer correction, wet tropospheric correction, and sea state bias correction, have significant impacts on the determination of local LSLT. The trend of default corrections contribute more than 1.4 mm year^?1 along the coastline of China mainland and 2.1 mm year^?1 to local LSLT in the Taiwan Strait. The default-corrected altimetric data exhibit highest and lowest local LSLTs in the southeast and northwest of Taiwan, respectively. The regional LSLTs of 3.8 mm year^?1 and 4.6 mm year^?1 are estimated from the default-corrected and uncorrected altimetric data in the study area, respectively.     

Progress report from Denmark

Space heating is seen in Denmark as the area where there is greatest potential for saving in energy use; why and how is explained in this article from the Danish Building Research Institute. It summarises the new building code regulations for insulation, heating and ventilation as well as more recent rules for existing buildings. Further action planned for the future is also outlined and examples are given of the many R & D activities in the country.     

An investigation of governance frameworks for public projects in Norway and the UK

This paper describes four case studies which formed a key part of an investigation into public investment project governance frameworks in Norway and the UK. The studies looked at how the embedded governance principles worked out in practice, how they affected PM, and how consistent their effects were with their aims. Conclusion is made about the actual effects of the frameworks, and various areas for improvement or further study are highlighted.     

A constructive speed observer design for general Euler–Lagrange systems

Astolfi, Ortega, and Venkatraman (2010) recently proved the existence of a globally exponentially convergent speed observer for general Euler–Lagrange systems. Key to their result, is a function defined by certain integrals which cannot be solved a priori, and may not have explicit analytic solutions. In this paper, this obstacle to a constructive design is removed and equations that solve the speed observer problem are given in closed form. The design is further simplified by removing up to one third of the observer states used in Astolfi et al. (2010). With the significant reduction in complexity, the new observer is easily applied to estimate the angular velocities in a Furuta pendulum example.     

Supercritical wood impregnation

The use of supercritical fluids for delivering biocides into wood and wood composites is an attractive technique because of the high penetration capacity of these solvents compared to the liquids used in conventional treatment methods. During the past two decades supercritical wood impregnation has moved from lab scale to commercial scale.This review presents an overview of the main research efforts that has been carried out within the field of supercritical wood impregnation. Results and conclusions of research within four main categories, i.e. (1) effects of impregnation on physical properties of samples, (2) retention and distribution of biocide in impregnated samples, (3) biological performance of impregnated samples, and (4) mathematical modeling of supercritical impregnation are reviewed and discussed.     

Load and health monitoring in glass fibre reinforced composites with an electrically conductive nanocomposite epoxy matrix

Fibre reinforced polymers (FRPs) are an important group of materials in lightweight constructions. Most of the parts produced from FRPs, like aircraft wings or wind turbine rotor blades are designed for high load levels and a lifetime of 30 years or more, leading to an extremely high number of load cycles to sustain. Consequently, the fatigue life and the degradation of the mechanical properties are aspects to be considered. Therefore, in the last years condition monitoring of FRP-structures has gained importance and different types of sensors for load and damage sensing have been developed.

In this work a new approach for condition monitoring was investigated, which, unlike other attempts, does not require additional sensors, but instead is performed directly by the measurement of a material property of the FRP. An epoxy resin was modified with two different types of carbon nanotubes and with carbon black, in order to achieve an electrical conductivity. Glass fibre reinforced composites (GFRP) were produced with these modified epoxies by resin transfer moulding (RTM). Specimens were cut from the produced materials and tested by incremental tensile tests and fatigue tests and the interlaminar shear strength (ILSS) was measured. During the mechanical tests the electrical conductivity of all specimens was monitored simultaneously, to assess the potential for stress/strain and damage monitoring.

The results presented in this work, show a high potential for both, damage and load detection of FRP structures via electrical conductivity methods, involving a nanocomposite matrix.     

Study of sialated neoglycoconjugates by surface enhanced Raman scattering spectroscopy

Neoglycoconjugates based on polyacrylamide and sialic acid with N-acetylneuraminic acid or sialooligosaccharides as side chains were studied by surface-enhanced Raman scattering (SERS) spectroscopy. It had previously been found that these polymers can effectively inhibit influenza virus adhesion. This study revealed the possibility to evaluate, based on the intensity of SERS signals, the overall availability for interaction and the conformational freedom of sialic acid residues in glycoconjugates. The dependence of these two factors on the structure and density of sialylated side chains was studied. The uniformity of distribution of sialylated side chains in conjugates was shown. Comparison of the results of the SERS spectroscopic study of the conjugates and the data on their inhibitory effect on the adhesion of specific strains of influenza virus allowed the identification of the conjugates for which the availability and conformational freedom of sialic acid are the main factors determining their inhibitory properties. A conclusion was also reached about the predominance of one of the mechanisms (competitive inhibition or steric stabilization) in the inhibitory properties of the specific conjugates.     

A new spd tight-binding model of magnetism in transition metals

We present the extension of an efficient spd tight-binding model to the case of spin polarized materials by including electron–electron interactions, in an extended Hubbard–Hartree–Fock formalism. It is applied with success to rhodium and palladium clusters and slabs.     

On the similarities between micro/nano lithography and topology optimization projection methods

The aim of this paper is to incorporate a model for micro/nano lithography production processes in topology optimization. The production process turns out to provide a physical analogy for projection filters in topology optimization. Blueprints supplied by the designers cannot be directly used as inputs to lithographic processes due to the proximity effect which causes rounding of sharp corners and geometric interaction of closely spaced design elements. Therefore, topology optimization is applied as a tool for proximity effect correction. Furthermore, it is demonstrated that the robust projection filter can be used to account for uncertainties due to lithographic production processes which results in manufacturable blueprint designs and eliminates the need for subsequent corrections.     

Layered silicate nanocomposites based on various high‐functionality epoxy resins. Part II: The influence of an organoclay on the rheological behavior of epoxy prepolymers

The effect of an organically surface modified layered silicate on the viscosity of various epoxy resins of different structures and different functionalities was investigated. Steady and dynamic shear viscosities of the epoxy resins containing 0–10 Wt% of the organoclay were determined using parallel plate rheology. Viscosity results were compared with those achieved through addition of a commonly used micronsized CaCO₃ filler. It was found that changes in viscosities due to the different fillers were of the same order, since the layered silicate was only dispersed on a micron‐sized scale in the monomer (prior to reaction), as indicated by X‐ray diffraction measurements. Flow activation energies at a low frequency were determined and did not show any significant changes due to the addition of organoclay or CaCO₃. Comparison between dynamic and steady shear experiments showed good agreement for low layered silicate concentrations below 7.5 wt%, i.e. the Cox‐Merz rule can be applied. Deviations from the Cox‐Merz rule appeared at and above 10 wt%, although such deviations were only slightly above experimental error. Most resin organoclay blends were well predicted by the Power Law model, only concentrations of 10 wt% and above requiring the Herschel‐Buckley (yield stress) model to achieve better fits. Wide‐angle X‐ray measurements have shown that the epoxy resin swells the layered silicate with an increase in the interlayer distance of approximately 15 Å, and that the rheology behavior is due to the lateral, micron‐size of these swollen tactoids.