Planungs- und Simulationssysteme in der Prozeßindustrie

Efficient scheduling systems are able to enhance production flow and production times in process industry. Scheduling, in this case, means simulation with alternatives of resources and/or activities. The result will be the exact time of output for each activity and the resulting profiles of capacity vectors concerning the recommended resources. In contrast to this, common planning systems add only the user defined production time of activities. Especially for flexible plants with batch production and a variable spectrum of products, as weil as for plants in the stage of design or enlargement, scheduling systems can be very helpful in identifying bottlenecks and over-capacities. Therefore, reduction of costs in a significant extent and additional benefits can be realized, provided that the individual conditions and objectives have been taken into account.     

Cardioinotropic Effects in Subchronic Intoxication of Rats with Lead and/or Cadmium Oxide Nanoparticles

Subchronic intoxication was induced in outbred male rats by repeated intraperitoneal injections with lead oxide (PbO) and/or cadmium oxide (CdO) nanoparticles (NPs) 3 times a week during 6 weeks for the purpose of examining its effects on the contractile characteristics of isolated right ventricle trabeculae and papillary muscles in isometric and afterload contractions. Isolated and combined intoxication with these NPs was observed to reduce the mechanical work produced by both types of myocardial preparation. Using the in vitro motility assay, we showed that the sliding velocity of regulated thin filaments drops under both isolated and combined intoxication with CdO–NP and PbO–NP. These results correlate with a shift in the expression of myosin heavy chain (MHC) isoforms towards slowly cycling β–MHC. The type of CdO–NP + PbO–NP combined cardiotoxicity depends on the effect of the toxic impact, the extent of this effect, the ratio of toxicant doses, and the degree of stretching of cardiomyocytes and muscle type studied. Some indices of combined Pb–NP and CdO–NP cardiotoxicity and general toxicity (genotoxicity included) became fully or partly normalized if intoxication developed against background administration of a bioprotective complex.     

Induction of DNA-double-strand breaks by auger electrons from 99mTc complexes with DNA-binding ligands

The potential of certain Auger electron emitting nuclides for systemic radiotherapeutic applications has recently gained much attention. In particular, the ability of several nuclides, including 111In, 125I, and 123I, to induce DNA double-strand breaks (dsb), a good indicator of cytotoxicity, has been extensively studied. However, this ability has never previously been shown experimentally for 99mTc, which, besides the well-known gamma radiation that is used for diagnostic applications, also emits an average of 1.1 conversion electrons and 4 Auger or Coster-Kronig electrons per decay. Owing to the short range of Auger electrons, the radionuclide needs to be located very close to the DNA for dsb to occur. We synthesized two cationic 99mTcI-tricarbonyl complexes with pendant DNA binders, pyrene and anthraquinone. The X-ray crystal structures of the two complexes could be elucidated. Linear dichroism and UV/Vis spectroscopy revealed that the complex with pyrene intercalates DNA with a stability constant, K, of 1.1 x 10(6) M(-1), while the analogous complex with anthraquinone interacts with DNA in a groove-binding mode and has an affinity value of K=8.9 x 10(4) M(-1). We showed with phiX174 double-stranded DNA that the corresponding 99mTc complexes induce a significant amount of dsb, whereas non-DNA-binding [TcO4]- and nonradioactive Re compounds did not. These results indicate that the Auger electron emitter 99mTc can induce dsb in DNA when decaying in its direct vicinity and this implies potential for systemic radiotherapy with 99mTc complexes.     

Synthesis of amphiphilic (meth)acrylates with oligo(ethylene glycol) and (or) oligo(propylene glycol) blocks by the esterification of (meth)acrylic acid

Thermoresponsive PEG-based (PEG stands polyethylene glycol) polymers are unique for use in medicine because of their low toxicity, good biocompatibility and biodegradability, but usually more hydrophobic and more toxic comonomers are used to adjust lower critical solution temperature (LCST). A convenient way to overcome this problem and to finely tune LCST is to use alkoxy oligo(ethylene glycol)- or alkoxy oligo(propylene glycol) (meth)acrylates as starting comonomers. Here we report on the conditions for the simple and affordable synthesis of methoxy oligo(propylene glycol) (meth)acrylate- and methoxy oligo(propylene glycol)-block-oligo(ethylene glycol) (meth)acrylate-based macromonomers with high yields (80%–98.7%) by the acid-catalyzed esterification of (meth)acrylic acid with alkoxy oligo(alkylene glycols) containing oligo(ethylene glycol) (OEG) and/or oligo(propylene glycol) (OPG) blocks. p-Toluene sulphonic acid (pTSA), alkyl(C₁₂–C₁₄)benzene sulfonic acid (ABSA) and H₂SO₄ were used as catalysts. It has been shown that pTSA and ABSA are practically the same in catalytic activity and are superior to sulfuric acid. The reaction orders with respect to catalyst was found to be close to 1 in all cases. It has been shown that the reaction is actually insensitive to the lengths of OEG and OPG blocks, as well as to the structure of the terminal alkyl group, while the esterification of acrylic acid (AA) proceeds much faster compared to methacrylic acid (MAA) one under the same conditions. The influence of temperature on the equilibrium conversions of alcohols was determined, which were found to be 89%–93% for the esterification of AA and 61%–86% for MAA in the temperature range of 60–120°C. A further increase in conversion was achieved by introducing an azeotropic agent (toluene), its optimal concentration was found to be 10%–15%.     

The influence of poly(3,4-ethylenedioxythiophene) modification on the transport properties and fuel cell performance of Nafion-117 membranes

Nafion-117/PEDOT composite membranes were synthesized by in situ chemical polymerization of 3,4-ethylenedioxythiophene (EDOT) using ammonium persulfate as an oxidant. The polymerization of EDOT in Nafion membranes for various EDOT/oxidant treatment sequences was studied for the first time. PEDOT introduction leads to a slight decrease in both the ion-exchange capacity and water uptake of the composite membranes, as well as to an increase in cationic transport. Membranes initially treated with an oxidant exhibit better conductivity and lower hydrogen permeability. The effect of both modification of Nafion-117 membranes by PEDOT and hot-pressing of hydrogen-oxygen membrane-electrode assemblies (MEAs) on the performance of proton-exchange membrane fuel cells was studied. The maximum power density of the fabricated MEAs increases 1.5-fold: from 510 (for a pristine Nafion-117 membrane) to 810 mW cm⁻² (for a membrane modified by PEDOT). The current density at a voltage of 0.4 V reaches 1248 and 2246 mA cm⁻², respectively.     

Profile miniaturization and performance improvement of a rectangular patch antenna using magnetic metamaterial substrates

The idea of profile miniaturization and performance improvement of a rectangular patch antenna using a metamaterial substrate with large values in the real part of effective relative permeability is proposed in microwave frequency range. The volume profile of the antenna is minimized by tuning the effective relative permeability and thickness of the substrate material. The specific type of metamaterial which can be used as substrate material for the antenna miniaturization purpose is suggested. The proposed idea is validated through finite‐difference time‐domain (FDTD) simulations for sample rectangular patch antennas with metamaterial substrates at the frequency about 10 GHz. Improvement of the power directivity is found for the metamaterial substrate with large value in the real part of effective permeability. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:254–261, 2016.     

Ultrasonic force microscopy: detection and imaging of ultra-thin molecular domains

The analysis of the formation of ultra-thin organic films is a very important issue. In fact, it is known that the properties of organic light emitting diodes and field effect transistors are strongly affected by the early growth stages. For instance, in the case of sexithiophene, the presence of domains made of molecules with the backbone parallel to the substrate surface has been indirectly evidenced by photoluminescence spectroscopy and confocal microscopy. On the contrary, conventional scanning force microscopy both in contact and intermittent contact modes have failed to detect such domains. In this paper, we show that Ultrasonic Force Microscopy (UFM), sensitive to nanomechanical properties, allows one to directly identify the structure of sub-monolayer thick films. Sexithiophene flat domains have been imaged for the first time with nanometer scale spatial resolution. A comparison with lateral force and intermittent contact modes has been carried out in order to explain the origins of the UFM contrast and its advantages. In particular, it indicates that UFM is highly suitable for investigations where high sensitivity to material properties, low specimen damage and high spatial resolution are required.     

A combinatorial intra-enterprise exchange for logistics services

The exchange of cargo capacities is a well established approach in logistics. However, only few logistics marketplaces are able to take into consideration synergies that can be generated by combining different transportation routes of different logistics carrierps. In order to exploit these synergies, we designed and implemented the combinatorial exchange mechanism ComEx for the intra-enterprise exchange of delivery orders in a logistics company organized in a profit center structure. Each profit center is able to release delivery orders to an adjacent profit center if the geographic locations of the customers allow for a reduced-cost delivery by the adjacent profit center. We demonstrate that by using the ComEx mechanism, the total cost of transportation of our logistics company can be reduced by up to 14%. Since our iterative auction mechanism is very complex and therefore resource-intensive, we reduce the complexity by applying a convex hull approach combined with a distance-based cost estimator.

Localized Synthesis of Iron Oxide Nanowires and Fabrication of High Performance Nanosensors Based on a Single Fe2O3 Nanowire

A composed morphology of iron oxide microstructures covered with very thin nanowires (NWs) with diameter of 15–50 nm has been presented. By oxidizing metallic Fe microparticles at 255 °C for 12 and 24 h, dense iron oxide NW networks bridging prepatterned Au/Cr pads are obtained. X‐ray photoelectron spectroscopy studies reveal formation of α‐Fe₂O₃ and Fe₃O₄ on the surface and it is confirmed by detailed high‐resolution transmission electron microscopy and selected area electron diffraction (SAED) investigations that NWs are single phase α‐Fe₂O₃ and some domains of single phase Fe₃O₄. Localized synthesis of such nano‐ and microparticles directly on sensor platform/structure at 255 °C for 24 h and reoxidation at 650 °C for 0.2–2 h, yield in highly performance and reliable detection of acetone vapor with fast response and recovery times. First nanosensors on a single α‐Fe₂O₃ nanowire are fabricated and studied showing excellent performances and an increase in acetone response by decrease of their diameter was developed. The facile technological approach enables this nanomaterial as candidate for a range of applications in the field of nanoelectronics such as nanosensors and biomedicine devices, especially for breath analysis in the treatment of diabetes patients.