Galvannealing of (High‐)Manganese‐Alloyed TRIP‐ and X‐IP®‐Steel

In this study the influence of Mn on galvannealed coatings of 1.7% Mn‐1.5% Al TRIP‐ and 23% Mn X‐IP®‐steels was investigated. It is shown that the external selective oxides like Mn, Al and Si of the TRIP steel which occur after annealing at 800 °C for 60 s at a dew point (DP) of ‐25 °C (5% H₂) hamper the Fe/Zn‐reaction during subsequent galvannealing. Preoxidation was beneficially utilized to increase the surface‐reactivity of the TRIP steel under the same dew point conditions. The influence of Mn on the steel alloy was investigated by using a 23% Mn containing X‐IP®‐steel which was bright annealed at 1100 °C for 60 s at DP ‐50 °C (5% H₂) to obtain a mainly oxide free surface prior to hot dip galvanizing (hdg) and subsequent galvannealing. As well known from the literature Mn alloyed to the liquid zinc melt stabilizes δ‐phase at lower temperatures by participating in the Fe‐Zn‐phase reactions, it was expected that the metallic Mn of the X‐IP®‐steel increases the Fe/Zn‐reactivity in the same manner. The approximation of the effective diffusion coefficient (D_eff(Fe)) during galvannealing was found to be higher than compared to a low alloyed steel reference. Contrary to the expectation no increased Fe/Zn‐reaction was found by microscopic investigations. Residual η‐ and ζ‐phase fractions prove a hampered Fe/Zn‐reaction. As explanation for the observed hampered Fe/Zn‐reaction the lower Fe‐content of the high‐Mn‐alloyed X‐IP®‐steel was suggested as the dominating factor for galvannealing.     

Carbon carbon detection: Diamond detectors and AMS

¹⁴C ions (290 keV) have been detected with chemically vapour deposited diamond. Potential benefits of diamond detectors are radiation hardness, high charge collection and very fast response time/high bandwidth.     

Titan, Titanlegierungen und Titanaluminide – Basis für innovative Anwendungen

Titanium is still a young material. In the mid of the last century first alloys enabled the entry into the age of jet engines – a step into a new era of aerospace. By now, titanium and its alloys have proven their capability in many additional high-tech applications. The present paper describes the most important alloys and their applications. With the development of intermetallic titanium aluminides the potential of titanium alloys as innovative high-temperature materials was increased considerably.     

Demonstration of a burner for the investigation of partially premixed low-temperature flames

A burner, which stabilizes near-one-dimensional low-temperature flames at atmospheric pressure, was designed to access the combustion regime near 1500 K for quantitative species diagnostics. Combustion temperatures between 1300 and 1800 K in argon-diluted methane-oxygen flames were achieved by preheating the burner and adapting the inert gas flow. Mass spectrometry with electron ionization was used to determine mole fractions profiles of reactants, products, and intermediates. Combustion parameters were varied including stoichiometry, diluent mole fraction and preheat temperature. Mole fraction profiles resemble those taken in regular premixed flat flames. A number of C₁- and C₂-intermediates as well as some oxygenated species were identified. Higher-mass species (m/z > 42) were not detected in the low-temperature methane-oxygen flames which contain 90% argon in the cold gases.     

Feasibility of monitoring large wind turbines using photogrammetry

Photogrammetry, which is a proven measurement technique based on determination of the 3D coordinates of the points on an object by using two or more images taken from different positions, is proposed to be a promising and cost efficient alternative for monitoring the dynamic behavior of wind turbines. The pros and cons of utilizing this measurement technique for several applications such as dynamic testing or health monitoring of large wind turbines are discussed by presenting the results of the infield tests performed on a 2.5 MW - 80 m diameter - wind turbine.     

Farm business and operator variables associated with bulk tank somatic cell count from dairy herds in the southeastern United States

Mastitis is a worldwide problem in dairy cows and results in reduced milk production, the culling of cows, and other economic losses. Bulk tank somatic cell count (BTSCC) over 200,000 cells/mL often indicates underlying subclinical mastitis in dairy herds. Several preventative measures that can be implemented to help improve the incidence of mastitis exist, but surveys find these practices not fully adopted by producers. The goal of this research was to analyze the farm and operator characteristics associated with BTSCC in dairy herds by analyzing a survey of dairy producers in the southeastern United States. We examined this region because it has experienced a decline in the number of dairy farms, dairy cows, and milk production over the past 2 decades. The southeast region is also associated with higher BTSCC levels than the national average. Dairy farms in Georgia, Mississippi, Kentucky, North Carolina, South Carolina, Tennessee, and Virginia were surveyed. Producers were asked questions about the BTSCC at which they take action to address BTSCC, the information sources they use to learn about and manage BTSCC, farm structure and management characteristics, and attitudinal variables associated with profitability, managerial control, and planning horizon. Least squares regression was used to determine how these factors were associated with BTSCC levels across the 7-state region. Concern over mastitis, financial consequences of mastitis, and increased previous-year BTSCC were associated with higher current BTSCC levels. Obtaining information about mastitis from veterinarians and extension personnel, taking action against mastitis at a BTSCC less than 300,000 cells/mL, and perceived ability to control processes and mastitis incidence were associated with reduced BTSCC. We found average BTSCC was lower in North Carolina and Virginia. These results suggest that proactive producers (i.e., those that perceive they can control BTSCC and seek information from reliable sources), were more likely to report lower BTSCC. As a result, it may be possible to achieve improved milk quality, evident from lowered BTSCC, across the region.     

Greenhouse gas emissions from the international maritime transport of New Zealand's imports and exports

Greenhouse gas emissions from international maritime transport are exempt from liabilities under the Kyoto Protocol. Research into quantifying these emissions is ongoing, and influences policy proposals to reduce emissions. This paper presents a cargo-based analysis of fuel consumption and greenhouse gas emissions from New Zealand's international maritime transport of goods. Maritime transport moves 99.5% (by mass) of New Zealand's internationally traded products. It is estimated that 73% of visiting vessels' activity can be directly attributed to the movement of goods in and out of New Zealand. A cargo-based methodology was used to estimate that the international maritime transport of New Zealand's imports and exports consumed 2.5 million tonnes (Mt; 2.6 billion litres) of fuel during the year 2007, which generated 7.7 Mt of carbon dioxide (CO₂) emissions. Double-counting of emissions would occur if a similar method was applied to all New Zealand's trading partners. In contrast, since few large vessels refuel in New Zealand, the National Greenhouse Gas Inventory listed 2007 international maritime transportation emissions as 0.98 Mt of CO₂, calculated from fuel bunkered for international transport. The results, therefore, show a significant difference between activity-based and bunker-fuel methodologies in quantifying New Zealand's emissions. International policy implications are discussed.     

Spatial dependence in wind and optimal wind power allocation: A copula-based analysis

The investment decision on the placement of wind turbines is, neglecting legal formalities, mainly driven by the aim to maximize the expected annual energy production of single turbines. The result is a concentration of wind farms at locations with high average wind speed. While this strategy may be optimal for single investors maximizing their own return on investment, the resulting overall allocation of wind turbines may be unfavorable for energy suppliers and the economy because of large fluctuations in the overall wind power output. This paper investigates to what extent optimal allocation of wind farms in Germany can reduce these fluctuations. We analyze stochastic dependencies of wind speed for a large data set of German on- and offshore weather stations and find that these dependencies turn out to be highly nonlinear but constant over time. Using copula theory we determine the value at risk of energy production for given allocation sets of wind farms and derive optimal allocation plans. We find that the optimized allocation of wind farms may substantially stabilize the overall wind energy supply on daily as well as hourly frequency.