EIS evaluation of the filiform corrosion of aluminium coated by a cataphoretic paint

Filiform corrosion is mainly considered as a cosmetic attack and is undesirable in most applications. The initiation and propagation of the filaments are related to different parameters such as the presence of defects, the permeability of the coating to water and oxygen, the adherence of the paint system and the presence of salts.

The aim of this work is to study the behaviour of painted aluminium samples towards filiform corrosion or delamination. The 6082 Aluminium alloy was selected and the samples were covered with a cataphoretic epoxy primer without lead (PPG Industries France). Prior to the application of the electrocoat, the samples were pre-treated by a commercial Zr/Ti or chromate conversion treatment or simply etched with a commercial acid etching product.

Filiform corrosion was studied by the normalized test (ISO/DIS 4623): painted and scratched samples were inoculated in HCl and exposed in a constant humidity chamber at 40 °C and 82% RH for 3 weeks. After exposure the samples were subjected to a visual and optical microscopic examination.

Electrochemical impedance spectroscopy was used to study the sensitivity to filiform corrosion. The operating mode of this test is similar to the normalized one. The samples were scratched before inoculation for 1 h in HCl and then exposed to the humidity chamber for a maximum of 4 days. The samples were tested by EIS in an acidified 0.1 M Na₂SO₄ electrolyte solution. The resulting impedance spectra were analyzed with an appropriate equivalent electrical circuit which allows the evaluation of the exposed metallic surface area, directly related to the extent of filiform corrosion or delamination. Different parameters were varied: the exposure time in the humidity chamber; the immersion time in the electrolyte sulphate solution as well as its pH and the coating thickness.     

Measurement of enzymatic activity and specificity of human and avian influenza neuraminidases from whole virus by glycoarray and MALDI-TOF mass spectrometry

Influenza neuraminidases hydrolyze the ketosidic linkage between N-acetylneuraminic acid and its adjacent galactose residue in sialosides. This enzyme is a tetrameric protein that plays a critical role in the release of progeny virions. Several methods have been described for the determination of neuraminidase activity, usually based on colorimetric, fluorescent, or chemiluminescent detection. However, only a few of these tests allow discrimination of the sialyl-linkage specificity (i.e., α2-3- versus α2-6-linked sialyllactosides) of the neuraminidase. Herein we report a glycoarray-based assay and a MALDI-TOF study for assessing the activity and specificity of two influenza neuraminidases on whole viruses. The human A(H3N2) and avian A(H5N2) neuraminidase activities were investigated. The results from both approaches demonstrated that α2-3 sialyllactoside was a better substrate than α2-6 sialyllactoside for both viruses and that H5N2 virus had a lower hydrolytic activity than H3N2.     

Correlation between mechanical properties and orientation of the crystalline and mesomorphic phases in isotactic polypropylene fibers

The microstructure and mechanical properties of melt-spun isotactic polypropylene (iPP) fibers were studied for different take-up velocities and throughputs with a combination of small- and wide-angle X-ray scattering, calorimetry and tensile tests. With the increase of take-up velocity the mesomorphic fraction of the fibers steadily decreases while the crystalline fraction increases. The addition of an alpha-nucleating agent led to an increase of crystallinity and a slight decrease of the orientation factor. By contrast, a beta-nucleator resulted in a complete suppression of the fiber crystallinity. The orientation factor of the mesophase and/or crystalline phase is found to have a one-to-one correlation with the fiber tenacity and deformation at break. At the same time, the absolute values of crystallinity and/or mesomorphicity are fully uncorrelated with these mechanical characteristics. The observed correlations can be used for example to design and control the fiber mechanical properties by tuning the processing conditions such as take-up velocity, throughput and addition of nucleating agents.     

Electromagnetic modeling of waveguide amplifier based on Nd<Superscript>3+</Superscript> Si-rich SiO<Subscript>2</Subscript> layers by means of the ADE-FDTD method

By means of ADE-FDTD method, this paper investigates the electromagnetic modelling of a rib-loaded waveguide composed of a Nd³⁺ doped Silicon Rich Silicon Oxide active layer sandwiched between a SiO₂ bottom cladding and a SiO₂ rib. The Auxilliary Differential Equations are the rate equations which govern the levels populations. The Finite Difference Time Domain (FDTD) scheme is used to solve the space and time dependent Maxwell equations which describe the electromagnetic field in a copropagating scheme of both pumping (λ _pump = 488 nm) and signal (λ _signal = 1064 nm) waves. Such systems are characterized by extremely different specific times such as the period of electromagnetic field ~ 10^-15 s and the lifetimes of the electronic levels between ~ 10^-10s and ~ 10^-4 s. The time scaling method is used in addition to specific initial conditions in order to decrease the computational time. We show maps of the Poynting vector along the propagation direction as a function of the silicon nanograin (Si-ng) concentrations. A threshold value of 10²⁴ Si-ng m^-3 is extracted below which the pump wave can propagate so that a signal amplication is possible.     

Experimental and modelling of supercritical oil extraction from rapeseeds and sunflower seeds

The supercritical oil extraction from oleaginous seeds (sunflower and rapeseeds) is presented here through experimental and modelling results. The experimental setup allows an accurate following of the mass of the oil extracted and to derive the experimental influences of pressure, temperature and supercritical CO₂ flowrate on the extraction curves. These parameters are very sensitive and highlight the necessity of precise optimisation of experimental conditions. In order to complete the behaviour of supercritical fluids extraction, an improved modelling is proposed. The modelling basic equations are based on others modelling published previously. In this work, the determination of several parameters comes from correlations and the other constants are fitted with all the experimental results. Thus the modelling is more representative and predictive as other ones. The modelling results present a good agreement with the experimental results, and hence it can be used for the dimensioning of some extraction autoclaves.     

Simulation of pH-controlled dissolution of aluminium based on a modified Scanning Electrochemical Microscope experiment to mimic localized trenching on aluminium alloys

Some constituent intermetallic (IMPs) particles at the surface of aluminium alloys are considered as preferential sites for the initiation of structural corrosion resulting in localized trenching around the particles and the surrounding Al matrix. In this work, a modified scanning electrochemical microscope (SECM) experiment was used to induce such phenomena via a local alcalinisation on 200 nm thick aluminium coatings promoting their local dissolution in an aerated 0.1 M NaCl electrolyte. The local alcalinisation was induced by the oxygen reduction reaction on the tip of a SECM which mimics the surface of an isolated IMP. From a phenomenological point of view, reproducible cylindrical damage develops in front of the platinum ultramicroelectrode (UME). Using a 2D finite element modelling to simulate the SECM experiments, the role of the local alcalinisation was validated and the calculated Al dissolution rate was found in agreement with the experimental evaluation.     

Gas sensors based on thick films of semi-conducting single walled carbon nanotubes

A comparative study was made of sorted semi-conducting single walled carbon nanotube (SWCNT) films and unsorted SWCNT films for gas sensing applications. The transmission line method is used to monitor separately the SWCNTs film resistance and the contact resistance between electrodes and the SWCNTs, thus revealing that the sensing mechanism mainly relies on a modification of the tube conductivity during gas exposure. The fabricated sensors demonstrate a detection limit of 20 ppb NO₂ and 600 ppb NH₃ mainly attributed to experimental setup limitations. Moreover, semi-conducting nanotubes happened to be 2.5 times more sensitive to NH₃ than unsorted ones, thus proving that selectivity can be improved by sorting the SWCNTs. The temperature dependence of the sensor sensitivity was studied, and a good agreement was found between experimental results and the Langmuir adsorption model.     

Improvement of corrosion protection offered to galvanized steel by incorporation of lanthanide modified nanoclays in silane layer

Silane sol–gel based films are very promising alternatives to the traditional chromate pre-treatments. However, the protection offered by the silane films strongly decreases when the coating is damaged. Some previous studies showed that the barrier properties of the silane layer can be improved by incorporation of clay nanoparticles. Moreover, inhibitive metallic cations can be incorporated in the nanoclays by ion exchange, providing a way to prepare cheap corrosion inhibitors nanoreservoirs offering self-healing properties. Rare earth (RE) metal salts have been shown to be effective corrosion inhibitors on a wide range of metals, including hot dip galvanized (HDG) steel. For this study, montmorillonite clay is modified to obtain a Ce(III) montmorillonite clay (Ce-MMT). The amount of incorporated Ce(III) is characterized by means of XRF measurements. X-ray diffraction showed that the Ce(III) is located in the interlayer space.