Synovial-type (group II) phospholipase A2 human seminal plasma

Phospholipase A2 (PLA2) was analysed in seminal plasma of fertile, subfertile, and vasectomized men as well as in prostatic secretion and tissue. Immunological cross-reactivity was observed between synovial-type PLA2 antiserum and the enzyme present in seminal plasma. There was a highly significant correlation between the concentration of the synovial-type PLA2, as measured by a time-resolved fluoroimmunoassay and the catalytic activity of the PLA2. The results show that the PLA2 content in human seminal plasma is very high (approximately 1000 times of that present in blood plasma) and that the enzyme belongs to the synovial-type group II phospholipase A2. The results also indicate that the enzyme is secreted by the prostate.     

Mechanical properties and strength retention of carbon fibre-reinforced liquid crystalline polymer (LCP/CF) composite: an experimental study on rabbits

A novel composite material with ultra-high flexural strength and cortical-bone-matched elastic modulus made of liquid crystalline polymer reinforced with carbon fibres (LCP/CF) is described. Cylindrical rods of 3.2 mm diameter and 50 mm length were fabricated by a preimpregnation/pultrusion method. The initial mechanical properties of the LCP/CF rods were as follows: flexural strength 448 MPa, flexural modulus 43 GPa, shear strength 164 MPa, and interlaminar shear strength 15.3 MPa. In the in vitro study the LCP/CF rods were immersed in phosphate-buffered saline of 37 degrees C for 12, 24, and 52 weeks. In the in vivo study the LCP/CF rods were implanted into the medullary cavity of both femora and subcutaneous tissue of the New Zealand White rabbits for 12, 24, and 52 weeks. The flexural strength of the LCP/CF rods at 52 weeks was 463 MPa in saline, 467 MPa in the subcutaneous tissue and 466 MPa in the medullary cavity of the femur. The flexural modulus was 44.6, 48.9 and 46.2 GPa, respectively. The corresponding shear strength values were 160, 178 and 181 MPa. We conclude that the LCP/CF is a promising material for high-load applications and the LCP/CF rods retain their initial mechanical properties in one-year follow-up in vivo and in vitro.     

Increase in Perceived Odor Emissions with Loading of Ventilation Filters

The development of odor emission rates from EU6 classified glass fiber bag filters was studied in four air-handling units (AHU), and emissions from the same kind of filters with EU3 classified polyester prefilters were studied in two units. The filters were loaded in six AHU in downtown Helsinki. The pressure drop was measured, and the odors of the filters were evaluated by a trained panel under laboratory conditions (T = 20°C, face velocity 1.0 m/s) every sixth week. The odor emissions of simultaneous atmospheric dust samples were also studied. The odor emissions of the filters rose during the first three months to a level where every third person would be dissatisfied. The emissions from coarse prefilters were similar to those from the more efficient filters without prefilters, and the emissions of the main filters were significantly lower if used with prefilters. This result indicates that the prefilters effectively protected the fine filters from odor-causing particles. The results of tests made with atmospheric samples agree with this result. Relative odor emissions were the highest in coarse fractions (> 10.0 μm). The pressure drop increased with the particle mass collected on the ventilation filter, but it did not correlate well with the odor emission of the filter. Thus, pressure drop alone is not an adequate criterion for changing supply air filters when hygienic aspects are a concern.     

The effects of operating conditions on emissions from masonry heaters and sauna stoves

Emissions from masonry heaters and sauna stoves were studied. In the sauna stove the production of organic gaseous carbon (OGC) at 10 gC kg^?1 (per kilogram of fuel), carbon monoxide (CO) at 55 g kg^?1, fine particle mass (PM₁) at 5 g kg^?1 and number emissions (N) at 1.8 × 10¹⁵ kg^?1 was higher than in other measured appliances. In a modern technology masonry heater with a unique grate, the emissions were very low: 0.4 gC kg^?1 OGC, 14 g kg^?1 CO and 0.7 g kg^?1 PM₁. Conventional masonry heaters, using small logs, clearly produced higher emissions when compared to using large logs. Doubling the fuel load caused emission factors to increase by up to 4- times (OGC), except for the number emission, which decreased from 4.0 × 10¹⁴ to 2.0 × 10¹⁴ kg^?1. From the conventional masonry heater 90% of the PM was emitted during the firing phase. Its combustion process is different to that in stoves or conventional open fireplaces. The insufficient supply of air, due to too fast pyrolysis, and increased ash release, due to the high combustion temperature, are the main parameters which cause high particle and gas emissions in masonry heaters and sauna stoves.     

Ray-casting and block model conversion using a spatial index

A spatial index is a data structure designed to facilitate spatial search, exemplified by the point-in-polyhedron inclusion problem. The 3D extensible cell (EXCELL) index is presented together with algorithms for spatial search and for converting a complex polyhedron (boundary representation) into an octree-like block model. We illustrate the techniques by an application to geometric mine modelling and demonstrate the efficiency of the approach by practical experiments.     

Foreign serum-induced pancreatitis in mice. II. Secretory disturbances of acinar cells

As previously reported, pancreatic acinar cell necrosis and inflammation develop in mice a few hours after one intraperitoneal injection of foreign serum. However, sublethally injured acinar cells exhibited notable increases in both zymogen granule numbers and amylase activity, observed within 3 hours and increasing with time. These two changes were coupled with a progressive decrease in the secretory response to pilocarpine and were preceded by significant disturbances in pancreatic tissue concentrations of sodium and potassium. We conclude that (1) the granule increase results from an induced disturbance of the granule exocytosis mechanism while granule formation continues and, therefore, (2) the granule secretory process is more sensitive to the serum injury mechanism than is the zymogen synthesis process. Although the granule increases developed in acinar cells throughout most of the nonnecrotic gland and persisted for at least 24 hours, acinar cell necrosis was maximal in extent--approximately 25% of the gland in severest form--by 12 to 15 hours. We conclude, therefore, that the increase in granules is neither the primary determinant nor initiator of acinar cell death. The latter is likely caused by disturbed plasma membrane functions, sufficient in some cells to result in lethal changes in ion and fluid composition. The injury mechanism, which permits granule formation to go on in the face of impaired granule exocytosis, is yet to be worked out. The possibilities are discussed in relationship to the reactivity of foreign sera for target cell plasma membranes.     

Inhomogeneous compression of PEMFC gas diffusion layer: Part II. Modeling the effect

The effect of inhomogeneous compression of GDL on the mass and charge transfer in PEMFC is studied. The model utilizes experimentally evaluated GDL parameters as a function of thickness. The modeling results are compared with a conventional model that excludes the effects. As a result, it is shown that the inhomogeneous compression has a significant effect on the current density distribution because of the varying contact resistance between GDL and electrode. This also implies that there are possible hot spots occurring inside the electrode, and thus inhomogeneous compression can have significant effects on the lifetime and local performance of the cell. According to the achieved results, the inhomogeneous compression of GDL cannot be neglected.     

Inhomogeneous compression of PEMFC gas diffusion layer: Part I. Experimental

This paper presents a study on the effect of inhomogeneous compression of gas diffusion layer (GDL) caused by the channel/rib structure of flow-field plate. The experimentally evaluated properties are GDL intrusion into the channel, gas permeability, in-plane and through-plane bulk electric conductivities, and contact resistances at interfaces as a function of compressed thickness of GDL. It was found that the GDL is compressed very little under the channel whereas GDL under the rib is compressed to gasket thickness. The compression of GDL reduces gas permeability and contact resistance, and improves bulk conductivity. Hence, the inhomogeneous compression of GDL may lead into significant local variation of mass and charge transport properties in the GDL. These effects have been ignored in most of the published modeling studies. This contribution, part I, covers the experimental setup and measurement results, and a model which takes the inhomogeneous compression of GDL into account is presented in part II.     

Prospecting hydrogen production of Escherichia coli by metabolic network modeling

Genome-scale model was applied to analyze the anaerobic metabolism of Escherichia coli. Three different methods were used to find deletions affecting fermentative hydrogen production: flux balance analysis (FBA), algorithm for blocking competing pathways (ABCP), and manual selection. Based on these methods, 81 E. coli mutants possessing one gene deletion were selected and cultivated in batch experiments. Experimental results of H₂ and biomass production were compared against the results of FBA. Several gene deletions enhancing H₂ production were found. Correctness of gene essentiality predictions of FBA for the selected genes was 78% and 77% in glucose and galactose media, respectively. 33% of the mutations that were predicted by FBA to increase H₂ production had a positive effect in experiments. Batch cultivation is a simple and straightforward experimental way to screen improvements in H₂ production. However, the ability of FBA to predict the H₂ production rate cannot be evaluated by batch experiments. Metabolic network models provide a method for gaining broader understanding of the complicated metabolic system of a cell and can aid in prospecting suitable gene deletions for enhancing H₂ production.     

Optimised selection of new protective coatings for biofuel boiler applications

Using biofuels in power and CHP boilers can pose a challenge for materials performance. Formation of deposits containing e.g. potassium, sulphur, calcium, sodium, and chlorine can result in severe corrosion of conventional steels and alloys at relatively modest temperatures. Given suitable component design and fabrication facilities, coatings may be considered to protect the fireside surfaces. This paper aims to present a systematic approach to the design and selection criteria for protective coatings of boilers. The approach includes modelling of the process and surface conditions, optimisation of the coating process and structure, and performance validation in the laboratory and plant scales. The applied examples have included iron and nickel based HVOF and arc sprayed coatings subjected to verification field testing in boiler testing under aggressive biofuel conditions. The coatings have shown good corrosion resistance in both laboratory tests and long‐term harsh field tests. The paper discusses the used approach for finding a suitable and cost effective coating for biofuel boiler applications. The paper gives test results from microstructural, corrosion resistance and field testing experience for the selected coatings.