Quantitative Analysis of Bioactive Compounds from Aromatic Plants by Means of Dynamic Headspace Extraction and Multiple Headspace Extraction‐Gas Chromatography‐Mass Spectrometry

Seven monoterpenes in 4 aromatic plants (sage, cardamom, lavender, and rosemary) were quantified in liquid extracts and directly in solid samples by means of dynamic headspace‐gas chromatography‐mass spectrometry (DHS‐GC‐MS) and multiple headspace extraction‐gas chromatography‐mass spectrometry (MHSE), respectively. The monoterpenes were 1st extracted by means of supercritical fluid extraction (SFE) and analyzed by an optimized DHS‐GC‐MS. The optimization of the dynamic extraction step and the desorption/cryo‐focusing step were tackled independently by experimental design assays. The best working conditions were set at 30 °C for the incubation temperature, 5 min of incubation time, and 40 mL of purge volume for the dynamic extraction step of these bioactive molecules. The conditions of the desorption/cryo‐trapping step from the Tenax TA trap were set at follows: the temperature was increased from 30 to 300 °C at 150 °C/min, although the cryo‐trapping was maintained at ?70 °C. In order to estimate the efficiency of the SFE process, the analysis of monoterpenes in the 4 aromatic plants was directly carried out by means of MHSE because it did not require any sample preparation. Good linearity (r² > 0.99) and reproducibility (relative standard deviation % <12) was obtained for solid and liquid quantification approaches, in the ranges of 0.5 to 200 ng and 10 to 500 ng/mL, respectively. The developed methods were applied to analyze the concentration of 7 monoterpenes in aromatic plants obtaining concentrations in the range of 2 to 6000 ng/g and 0.25 to 110 μg/mg, respectively.     

Antioxidant activity,color chromaticity coordinates,and chemical characterization of monofloral honeys from Morocco

The bioprospecting of several monofloral Moroccan honeys was carried out. The antiradical activity expressed as mmol Trolox equivalents/kg of honey and evaluated by 2,2-diphenyl-1-picrylhydrazyl assay, ranged from 0.15 for euphorb honey to 1.08 for citrus honey. The antioxidant activity expressed as mmol Fe²⁺/kg and evaluated by ferric ion reducing antioxidant power assay, ranged from 0.96 for euphorb honey to 4.74 for orange honey. The total phenol content was evaluated by colorimetric assay, while the color attributes were evaluated as transmittance data. Significant Pearson correlation factors were found between total polyphenol amount and antioxidant activity and between color attributes and antioxidant activity. Furthermore the chemical composition of volatile organic compounds was determined. The volatile organic compounds chemical composition of the studied honeys was mainly represented by terpene and benzene derivatives, Maillard reaction products, isoprenoids, and hydrocarbons. The volatiles fingerprint, as well as a targeted high-performance liquid chromatography analysis of the polar components, was used to tentatively confirm the declared botanical origin of the samples studied.     

Electrical double-layer capacitors: evaluation of ageing phenomena during cycle life testing

This paper represents an assessment of the main ageing phenomena in electrical double-layer capacitors (EDLCs). In this study the cycle life of the EDLC cells with a rated capacitance of 1,600 F has been investigated at different ambient temperatures and current rates. From the experimental results we can observe that the impact of the high ambient temperature is significant on the cycle life of the cells. Moreover, the results also show the negative impact of the current rate. The internal resistance tests showed that the increase of the resistance is much higher than the decrease of the capacitance. Thus, the ageing of the EDLC during cycling was clearly non-linear. Further the EIS measurements indicated the higher increase of the imaginary part of the impedance at low frequencies during cycling, which indicates the capacitance fade.     

Adaptive device-to-device communication using Wi-Fi Direct in smart cities

Wi-Fi Direct has become vastly popular in the last few years. Due to its fast network setup and the provision of high transmission rates, it is expected to be the piggyback technology for high speed device-to-device communications in smart cities. The increasing demand on Wi-Fi Direct networks and its co-location in the same band with other Wi-Fi ad-hoc and infrastructure networks have entailed the need for developing new adaptive techniques to utilize the wireless spectrum efficiently. In this paper, we introduce, analyze and implement a self-organizing algorithm designed specifically for pop-up Wi-Fi Direct networks. The algorithm dynamically changes the operating channels of pop-up Wi-Fi Direct networks according to their performance in a non-cooperative manner. It utilizes the spectrum efficiently, reduces congestion and enhances performance. Moreover, the modified Wi-Fi Direct network running the proposed algorithm is interoperable with all other Wi-Fi network modes and setups and does not affect their functionalities. On the contrary, it enhances their performance implicitly. We implement the algorithm using the driver of RTL8188CUS chipset in a Linux environment and conduct experiments to evaluate its performance. The obtained results illustrate the benefits of using the proposed algorithm.     

Radio resource management for LTE-A relay-enhanced cells with spatial reuse and max–min fairness

One of the major issues in LTE-Advanced (LTE-A) systems is the poor capacity at the cell edge. This is mainly due to the interference experienced by the users as a result of the aggressive frequency reuse usually implemented. Relaying offers an attractive solution for this problem by offering better links than those with the eNodeB (eNB) for the terminals suffering from high path loss or high interference. However, adding relays complicates the resource allocation problem at the eNB and therefore the need for more efficient schemes arises. This is also aggravated by the reuse of resource blocks (RBs) by the relays to fully exploit the scarce spectrum, which, in turn, leads to intra-cell interference. In this paper, we study the joint power and resource allocation problem in LTE-A relay-enhanced cells that exploit spatial reuse. To guarantee fairness among users, a max–min fair optimization objective is used. This complex problem is solved using coordinate ascent and the difference of two convex functions (DC) programming techniques and the proposed scheme indeed converges to a local-optimum quickly. This is shown to be a satisfactory solution according to the simulation results that indicate an almost sevenfold increase in the 10th percentile capacity when compared to previously proposed solutions.     

Transition metal nanoparticles doped carbon paper as a cost-effective anode in a microbial fuel cell powered by pure and mixed biocatalyst cultures

The poor wettability and high cost of the carbonaceous electrodes materials prohibited the practical applications of microbial fuel cells (MFCs) on large scale. Here, a novel nanoparticles of metal sheathed with metal oxide is electrodeposited on carbon paper (CP) to introduce as high-performance anodes of microbial fuel cell (MFC). This thin layer of metal/metal oxide significantly enhance the microbial adhesion, the wettability of the anode surface and decrease the electron transfer resistance. The investigation of the modified CP anodes in an air-cathode MFCs fed by various biocatalyst cultures shows a significant improving in the MFC performance. Where, the generated power and current density was 140% and 210% higher as compared to the pristine CP. Mixed culture of exoelectrogenic microorganism in wastewater exhibited good performance and generated higher power and current density compared to yeast as pure culture. The excellent capacitance with a distinctive nanostructure morphology of the modified-CP open an avenues for practical applications of MFCs.     

Aluminizing nickel foam by a slurry coating process

A simple, one-step slurry coating technique was used to aluminize open cell nickel metal foam at low temperature and short hold-down time. Three slurries of different composition, heat-treated at 650 °C for 2 h, were used to investigate the possibility of developing an aluminide coating on a commercially produced Ni foam. In all cases a dense, well-adhered to the Ni substrate aluminide coating of several μm thickness was produced. The thickness and aluminide phase and composition (NiAl and/or Ni₃Al) of the coating strongly depend on Al content and the mix of activators in the slurry.     

Macroporous calcium phosphate ceramic implants for sustained drug delivery

Limited blood circulation to the skeletal tissue is a major cause of reduced therapeutic effects seen with drugs administered by conventional systemic ways. To resolve this issue and obtain a sufficiently high local concentration to induce therapeutic effects, several implanted drug delivery systems have been developed for hard tissues using biomaterials.We have designed a drug delivery device based on hydroxylapatite (HA) and tested it in vitro using metronidazol and chloramphenicol as model compounds. Porous HA ceramics were prepared with two different shapes (cylindrical and spherical). Known amounts of drugs were introduced inside a drilled hole and sealed with wax. The ceramics were then suspended in stirred distilled water in closed polypropylene vials. Drug release was observed during several weeks.A mathematical model used to describe drug release from HA was elaborated based on the expressions of Fick's laws. The experimental kinetic results could be related to ceramic constitution and to drug localization.     

Combined microwave and enzymatic treatments for ��-lactoglobulin and bovine whey proteins and their effect on the IgE immunoreactivity

Effect of combined microwave (MW) and enzymatic hydrolysis on the human immunoglobulin E (IgE)-binding properties of ??-lactoglobulin (??-lg) and other whey proteins (WP) was investigated. Separated ??-lg and full whey protein isolate (WPI) were hydrolyzed with trypsin, chymotrypsin, mixture of trypsin/chymotrypsin, and pepsin at three microwave power levels: 50?W during 1 and 5?min, 100 and 200?W during 1 and 3?min. The immunoreactivity of the obtained hydrolysates resulting from combined microwave protease treatment was assessed using sera of young patients allergic to bovine whey proteins. The application of microwave treatment at 200?W enhances the hydrolysis of ??-lg by pepsin in 3?min and decreases significantly its immunoreactivity. The extensive hydrolysis of the microwave-treated ??-lg and WPI with trypsin, chymotrypsin, and the mixture of trypsin with chymotrypsin did not have an impact on the IgE binding of the products obtained in all the studied conditions.     

Photovoltaic technology in Malaysia: past,present, and future plan

This article presents solar energy or specifically the solar photovoltaic (PV) development outlook in Malaysia. The paper first introduces the massive potential of solar energy in the country, the key players in the solar energy development and the early solar energy policies, and programmes in the country. The most important to the PV development is the Malaysia Building Integrated Photovoltaic initiative, which is presented in this paper followed by an explanation on the Feed-in Tariff recently introduced in the country to encourage new solar PV projects. The outlook for solar PV in Malaysia is optimistic and as the uptake of solar PV increases, the unit cost is coming down rapidly. Solar PV is expected to be the most competitive Renewable Energy (RE) source, with the potential to achieve grid parity for electrical power in the country in the near future, and surpassing all other REs combined by 2050.