Particle velocity and solids circulation rate in a jet-spouted bed

Radial distribution of particle velocities, solids circulation rate and radial variation in bed voidage in a jet-spouted bed were investigated in a 0.2 m diameter conical-cylindrical column. The upward particle velocity is strongly dependent on gas velocity and its radial profile is the Gaussian. The solids circulation rates are of the same order of magnitude as those in a conventional spouted bed and are proportional to the gas velocity. Estimation of the variation in bed voidage in the radial direction revealed that the annulus voidage of about 0.90 was greater than the spout voidage of around 0.70. This tendency is contrary to that in a conventional spouted bed.     

Phase Relations and Volume Changes of Hafnia under High Pressure and High Temperature

Using multi-anvil high-pressure devices and synchrotron radiation, X-ray in situ observations of HfO₂ under high pressure and high temperature have been performed to investigate its phase relations and compression behavior. An orthorhombic phase (orthoI) is stable from 4 to 14.5 GPa below 1250°–1400°C and transforms to a tetragonal phase, which is one of the high-temperature forms of HfO₂, above these temperatures. Another orthorhombic phase (orthoII) with a cotunnite-type structure appears above 14.5 GPa. OrthoII is stable up to 1800°C at 21 GPa. OrthoII is quenchable to ambient conditions. The orthoI-to-orthoII transition is accompanied by ∼8 vol% decrease. The bulk moduli of orthoI and orthoII at room temperature are 220 and 312 GPa, respectively. This low compressibility of orthoII indicates that it is a potential candidate for very hard materials.     

Silver(I)-Ion-Mediated Cytosine-Containing Base Pairs: Metal Ion Specificity for Duplex Stabilization and Susceptibility toward DNA Polymerases

Spectroscopic characterization of Ag^I-ion-mediated C-Ag^I-A and C-Ag^I-T base pairs found in primer extension reactions catalyzed by DNA polymerases was conducted. UV melting experiments revealed that C-A and C-T mismatched base pairs in oligodeoxynucleotide duplexes are specifically stabilized by Ag^I ions in 1:1 stoichiometry in the same manner as a C-C mismatched base pair. Although the stability of the mismatched base pairs in the absence of Ag^I ions is in the order C-A≈C-T>C-C, the stabilizing effect of Ag^I ions follows the order C-C>C-A≈C-T. However, the comparative susceptibility of dNTPs to Ag^I-mediated enzymatic incorporation into the site opposite templating C is dATP>dTTP≫dCTP, as reported. The net charge, as well as the size and/or shape complementarity of the metal-mediated base pairs, or the stabilities of mismatched base pairs in the absence of metal ions, would be more important than the stability of the metallo-base pairs in the replicating reaction catalyzed by DNA polymerases.     

Simulation of mechanical properties of epoxy-based chemically amplified resist by coarse-grained molecular dynamics

The mechanical properties of an epoxy-based chemically amplified resists with various cross-linking ratios were simulated using a newly developed coarse-grained molecular dynamics simulation that employs a bead–spring model. Models with the different cross-linking ratios were created in the molecular dynamics calculation step and uniaxial elongation simulations were performed. The results reveal that the simulated elastic modulus of the resist modeled by the Kremer–Grest model with an extended angle bending potential depends on the cross-linking ratio, its dependency exhibits good agreement with that determined by nanoindentation tests.     

The α–β Transformation in Silicon Nitride Single Crystals

Single crystals of α-Si₃N₄ were annealed at 2000°–2150°C. The β phase was detected after annealing at 2150°C only when the crystals were surrounded by MgO·3Al₂O₃ or Y₂O₃ powders. On the other hand, no evidence of the α–β transformation was found when the crystals were annealed without additives. The solution–precipitation mechanism was concluded to be the dominant factor in the α–β transformation of Si₃N₄.     

Fabrication and Mechanical Properties of Continuously Graded MoSi2–ZrO2(2Y) Materials Using Wet-Molding

Continuously graded MoSi₂-ZrO₂(2Y) materials with high density (97.5% of theoretical) have been fabricated by uniaxial wet-molding, followed by hot pressing (1000°C/1 h/30 MPa) and hot isostatic pressing (1400°C/2 h/196 MPa). Their composition profiles are greatly influenced by the viscosity of mixed solutions of glycerin and ethanol used as a dispersion medium; a linear compositional gradient from MoSi₂/ZrO₂(2Y) 70/30 to 20/80 mol% is obtained from the solution (50/50 vol%) with a viscosity of 20 mPa s. Vickers hardness (Hv) and fracture toughness (KIC) increase from 9.7 to 12.4 GPa and from 5.1 to 12.5 MPa m1/2, respectively, with increasing ZrO₂(2Y) composition.     

Force measurement enabling precise analysis by dynamic force spectroscopy

Dynamic force spectroscopy (DFS) makes it possible to investigate specific interactions between two molecules such as ligand-receptor pairs at the single-molecule level. In the DFS method based on the Bell-Evans model, the unbinding force applied to a molecular bond is increased at a constant rate, and the force required to rupture the molecular bond is measured. By analyzing the relationship between the modal rupture force and the logarithm of the loading rate, microscopic potential barrier landscapes and the lifetimes of bonds can be obtained. However, the results obtained, for example, in the case of streptavidin/biotin complexes, have differed among previous studies and some results have been inconsistent with theoretical predictions. In this study, using an atomic force microscopy technique that enables the precise analysis of molecular interactions on the basis of DFS, we investigated the effect of the sampling rate on DFS analysis. The shape of rupture force histograms, for example, was significantly deformed at a sampling rate of 1 kHz in comparison with that of histograms obtained at 100 kHz, indicating the fundamental importance of ensuring suitable experimental conditions for further advances in the DFS method.     

Dehydrogenative polycondensation of telechelically bis(dimethylsilyl)functionalized oligo(dimethylsiloxane)s or aromatics and 1,3,3,5,5,7,7,7-octamethyltetrasiloxane

Telechelically bis(hydrodimethylsilyl)-functionalized oligo(dimethylsiloxane)s or aromatics were found to give polymers constituting of alternating disilylene and oligodimethylsiloxane or 4,4′-diylaromatics as repeating units by dehydrogenative coupling reaction in the presence of palladium dibenzylideneacetone complex. The same catalyst gave polysilylenes with trisiloxane pendant from 1,1-dihydro-1,3,3,5,5,7,7,7-octamethyltetrasiloxane. Received: 18 October 1996/Accepted: 31 October 1996     

Detection of Multiple Blockages in Parallelized Microreactors

In a plant consisting of parallelized microreactors (MRs), the product quality is lowered because of a lack of flow uniformity among them when blockage occurs. It is not practical to install sensors in every MR from the viewpoint of cost when detecting the blocked MRs. In the previous study, the multiple blockage detection (MBD) method using a small number of sensors was proposed, but its performance became low when the number of sensors decreased. Here, the conventional algorithm for MBD is improved by considering the process behavior on blockage occurrence, and the effectiveness of the improved algorithm is demonstrated through a numerical case study. The effects of flow distributor types and sensor types on the MBD performance are numerically investigated.