Dynamic observations of the fracture phenomena in alpha/beta brass two-phase bicrystals

In situ dynamic observations of the deformation and fracture characteristics of alpha/beta brass two-phase bicrystals were made by the solid diffusion method. The results indicated clearly that the crack initiation site was at the interface. The crack propagation direction, in both the alpha and beta phases, was found to be orientation dependent. Complementary experiments on alpha and beta brass single crystals confirmed the theories and results obtained previously on ductile single crystals.On leave from the Mechanical Engineering Department, Al-Azhar University, Cairo, Egypt.     

Size-dependent volatility of diesel nanoparticles: chassis dynamometer experiments

We analyzed the size-dependent volatility of nanoparticles in a diameter range of 30-70 nm in diesel exhaust emissions. The test system included a medium-duty diesel truck on a chassis dynamometer, a single-stage dilution tunnel, a tandem differential mobility analyzer (TDMA) equipped with an electric furnace, and a condensation particle counter. The size shifts of monodispersed diesel nanoparticles under changing furnace temperatures were measured by TDMA in the gas phase. Together with the reduction of average particle size and volume, we observed the development of bimodal size distributions resulting from the separation between semivolatile and nonvolatile species as the furnace temperature was increased. While 91-98% of the particles were found to be semivolatile species by total volume during the idling engine condition, only 6-9% were semivolatile during the one-half engine load condition. We also found that smaller particles contained a larger fraction of semivolatile species.     

MgATP-induced conformational changes in a single myosin molecule observed by atomic force microscopy: periodicity of substructures in myosin rods

This paper discusses the conformational changes in a single myosin molecule directly observed using atomic force microscopy (AFM). The myosin molecules were pretreated in rigor solutions without MgATP or in relaxed solutions with various concentrations of MgATP. The images of these molecules were obtained using a tapping mode AFM. The results indicate that the orientation of the myosin's heads and tail strongly depend on the MgATP concentration. Without using MgATP, almost all of the myosin molecules are in the extended form; however, when MgATP is used, the molecules bend according to the level of MgATP concentration. The mean-square end-to-end distance of the myosin molecules is significantly shorter with p[MgATP] = 4 than with p[MgATP] = 6. The rod region did not show the same level of intensity along their length in the extended form. The rods exhibited clusters of discontinuity, which were identified as substructures. The size of these substructures change at intervals that are multiples of 14.3-14.5 nm, which reflects the periodicity of the alpha-helical coiled coils. The substructure clusters also correspond to the myosin crossbridge spacing in muscles (14.3 or 43 nm). These results suggest that the myosin's head bends in conjunction with the bending or tilting in the helical substructures. Conformational changes of the myosin molecule induced by MgATP seem to mimic the molecular motions in a muscle's force generation process.     

A Novel KCaNi/α-Al2O3 Catalyst for CH4 Reforming with CO2

A potassium and calcium co-promoted nickel catalyst (KCaNi/-Al₂O₃) prepared by a direct impregnation method possessed a high activity, high stability and excellent coke resistance properties in CH₄ reforming with CO₂. XRD, XPS and H₂-TPR characterizations indicated that (i) Ca and K strengthened the interaction between Ni and -Al₂O₃ and promoted the formation of a unique NiAl₂O₄ phase on the surface of the catalyst and (ii) Ca and K increased the dispersion of Ni and retarded its sintering. Coking reactions (CH₄ temperature-programmed decomposition and O₂-TPO) disclosed that K reduced carbon formation via CH₄ decomposition.     

Discrimination of psychoactive fungi (commonly called "magic mushrooms") based on the DNA sequence of the internal transcribed spacer region

'Magic mushrooms' (MMs) are psychoactive fungi containing the hallucinogenic compounds, psilocin (1) and psilocybin (2). Since June 6, 2002, these fungi have been regulated by the Narcotics and Psychotropics Control Law in Japan. Because there are many kinds of MMs and they are sold even as dry powders in local markets, it is very difficult to identify the original species of the MMs by morphological observation. Therefore, we investigated the internal transcribed spacer (ITS) region in the ribosomal RNA gene of MMs obtained in Japanese markets to classify them by a genetic approach. Based on the size and nucleotide sequence of the ITS region amplified by PCR, tested MMs were classified into 6 groups. Furthermore, a comparison of the DNA sequences of the MMs with those of authentic samples or with those found in the databases (GenBank, EMBL and DDBJ) made it possible to identify the species of tested MMs. Analysis by LC revealed that psilocin (1) was contained at the highest level in Panaeolus cyanescens among the MMs, but was absent in the Amanita species.     

A novel anionic surfactant templating route for synthesizing mesoporous silica with unique structure

Anionic surfactants are used in greater volume than any other surfactants because of their highly potent detergency and low cost of manufacture. However, they have not been used as templates for synthesizing mesoporous silica. Here we show a templating route for preparing mesoporous silicas based on self-assembly of anionic surfactants and inorganic precursors. We use aminosilane or quaternized aminosilane as co-structure-directing agent (CSDA), which is different from previous pathways. The alkoxysilane site of CSDA is co-condensed with inorganic precursors; the ammonium site of CSDA, attached to silicon atoms incorporated into the wall, electrostatically interacts with the anionic surfactants to produce well-ordered anionic-surfactant-templated mesoporous silicas (AMS). These have new structures with periodic modulations as well as two-dimensional hexagonal and lamellar phases. The periodic modulations may be caused by the coexistence of micelles that differ in size or curvature, possibly owing to local chirality. These mesoporous silicas provide a new family of mesoporous materials as well as shedding light on the structural behaviour of anionic surfactants.     

Developmental word acquisition and grammar learning by humanoid robots through a self-organizing incremental neural network.

We present a new approach for online incremental word acquisition and grammar learning by humanoid robots. Using no data set provided in advance, the proposed system grounds language in a physical context, as mediated by its perceptual capacities. It is carried out using show-and-tell procedures, interacting with its human partner. Moreover, this procedure is open-ended for new words and multiword utterances. These facilities are supported by a self-organizing incremental neural network, which can execute online unsupervised classification and topology learning. Embodied with a mental imagery, the system also learns by both top-down and bottom-up processes, which are the syntactic structures that are contained in utterances. Thereby, it performs simple grammar learning. Under such a multimodal scheme, the robot is able to describe online a given physical context (both static and dynamic) through natural language expressions. It can also perform actions through verbal interactions with its human partner.     

Power generation of the touching Cu/Bi-Te/Cu composites under the periodically alternating temperature gradients

The thermo-emf ΔV of the touching p- and n-type Cu/Bi-Te/Cu composites with different thicknesses of t _Bi-Te and t _Cu was measured as a function of time by alternating the temperature difference ΔT at periods of T = 20, 60, 120, 240 and ∞ sec, where t _Bi-Te was varied from 0.1 to 2.0 mm and t _Cu from 0 to 4.0 mm. As a result, ΔV changes significantly with t _Bi-Te, t _Cu and T. The effective thermo-emf ΔV _eff increases significantly with an increase of 1/T and exhibited a local maximum at 1/T = 1/240 s⁻¹. The resultant | α | and the effective temperature difference ΔT _eff were increased significantly by optimizing t _Bi-Te and t _Cu at 1/T = 1/240 s⁻¹. The power generation ΔW _eff (= ΔV _eff²/4R _calc) estimated using the measured ΔV _eff and calculated R _calc also exhibited a local maximum at 1/240 s⁻¹ for an optimum combination of t _Bi-Te = 0.1 mm and t _Cu = 2.0 mm, so that the maxima ΔW _eff at 1/T = 1/240 s⁻¹ for the p- and n-type composites were 2.28 and 2.92 times higher than those obtained at 1/T = 0 s⁻¹. This significant increase in ΔW _eff is owing to both the increase in ΔT _eff and the increase in ZT due to the increase in |α|. The power generation was thus found to be enhanced significantly by imposing the alternating temperature gradients on touching Cu/Bi-Te/Cu composites.     

Dependence of Seebeck coefficient on a load resistance and energy conversion efficiency in a thermoelectric composite

The thermo-emf ΔV and current ΔI generated by imposing the alternating temperature gradients (ATG) at a period of T and the steady temperature gradient (STG) on a thermoelectric (TE) composite were measured as a function of t, where t is the lapsed time and T was varied from 60 to or ∞ s. The STG and ATG were produced by imposing steadily and alternatively a source voltage V in the range from 1.0 to 4.0 V on two Peltier modules sandwiching a composite. ΔT, ΔV, ΔI and V_P oscillate at a period T and their waveforms vary significantly with a change of T, where ΔV and V_P are the voltage drops in a load resistance R_L and in resistance R_P of two modules. The resultant Seebeck coefficient |α| = |ΔV|/ΔT of a composite under the STG was found to be expressed as |α| = |α₀|(1 − R_comp/R_T), where R_T is the total resistance of a circuit for measuring the output signals and R_comp is the resistance of a composite. The effective generating power ΔW_eff has a local maximum at T = 960 s for the p-type composite and at T = 480 s for the n-type one. The maximum energy conversion efficiency η of the p- and n-type composites under the ATG produced by imposing a voltage of 4.0 V at an optimum period were 0.22 and 0.23% at ΔT_eff = 50 K, respectively, which are 42 and 43% higher than those at ΔT = 42 K under the STG. These maximum η for a TE composite sandwiched between two Peltier modules, were found to be expressed theoretically in terms of R_P, R_T, R_L, α_P and α, where α_P and α are the resultant Seebeck coefficients of Peltier modules and a TE composite.     

A Gait Phase Measurement System Using Treadmill Motor Current

The article describes the development of a gait phase time-based split-belt treadmill measurement system. Conventional methods of measuring gait phase, such as the foot switch and force plate, require significant preparation and are costly. In this article, we propose a simple, cheap, and accurate gait phase measurement system that utilizes only the treadmill motor current value. Comparison of this algorithm with conventional methods reveals that the proposed algorithm is as accurate as the foot switch. Moreover, the proposed algorithm can estimate stance phase within a 0.2?s error of the measured value of the force plate in most cases (four out of five healthy subjects). This accuracy is higher than that of the foot switch which is widely used in the clinical field.