Optimal control and the Pontryagin's principle in chemical engineering: History,theory, and challenges

In the mid-1950s, Pontryagin et al. published a principle that became a fundamental concept in optimal control (OC) theory. The principle provides theoretical and practical methods to find the solution of OC problems, in particular, open-loop control problems. In chemical engineering, the principle has played an important role as a decision making framework for more than 60 years. This study gathers the main contributions on the application of the Pontryagin's principle to the dynamic optimization of chemical processes. A concise overview of the optimality conditions for a wide class of constrained OC problems is provided. Numerical methods to solve the necessary conditions and strategies to address inequality constraints are summarized. The information and illustrative case study presented in this work can be used as a guide to implement the principle in different settings. Opportunities for further application of the principle in relevant chemical engineering problems are also discussed.     

Hydrogenation of vegetable oil using highly dispersed Pt/γ-Al2O3 catalyst: Effects of key operating parameters and deactivation study

In the present work, Pt/γ-Al₂O₃ catalysts with high metal dispersion were prepared and characterized using chloroplatinic acid and platinum acetylacetonate as metal precursors. The activity and selectivity of the catalysts were evaluated in the hydrogenation of sunflower oil. A comprehensive analysis of the effects of key operational parameters on catalytic performance was carried out. The experimental variables were hydrogen pressure (275.8–551.6 kPa), temperature (160–200°C), and catalyst loading (0.005–0.015 kg Pt_exp/m³_oil). Platinum catalysts were active, with a double bond conversion of 28% at 2 h. The metal precursor affected catalyst selectivity. The catalyst prepared with chloroplatinic acid exhibited a lower formation of trans-isomers compared with Pt acetylacetonate. The γ-Al₂O₃ supported platinum catalyst with a metal loading of 0.51 wt.% and a metal dispersion of 98% maintained its initial catalyst activity and selectivity after 10 consecutive uses (1200 min accumulate operation time), without changes in its catalytic properties. The obtained results suggested that Pt catalysts are an attractive alternative to conventional nickel catalysts for the hydrogenation of vegetable oil.     

SEM and AFM characterization of surface of two RMGICs for degradation before and after modification with bioactive glass ceramic

Objectives: The aim of this study was to evaluate the effect of bioactive glass–ceramic particles (Biosilicate®) addition on surface nanoroughness and topography of Resin-modified glass ionomer cements (RMGICs).

Methods: Experimental materials were made by incorporating 2 wt% of Biosilicate® into Fuji II LC® (FL) and Vitremer® (VT) powders. Disks of RMGICs (with and without Biosilicate®) measuring 0.5 cm (diameter) × 0.5 mm (thickness) were fabricated and polished. Samples were stored at 37 °C in dry or immersed in distilled water for 30 days. Digital images (20 × 20 μm) from the surfaces were obtained by means of an atomic force microscopy. Three images were acquired for each sample, and four nanoroughness measurements were performed in each image. Nanoroughness (Ra, nm) was assessed by Nanoscope Software V7. Data were analyzed with ANOVA and Student–Newman–Keuls multiple comparisons (p < 0.05). SEM images were obtained for surface topography analysis.

Results: FL was significantly rougher than VT (p < 0.05) in wet and dry conditions. The addition of Biosilicate® increased the surface roughness in VT and decreased in FL, regardless of the storage media (p ≤ 0.05). No differences existed between materials and storage conditions after Biosilicate® addition. Significance: The Biosilicate® particles addition produced changes on the surface nanoroughness of the RMGICs. These changes depended on the particles size of the original cements in dry conditions. In water storage, dissolution of the Biosilicate® particles, a silica-rich gel formation, and a hydroxyl carbonate apatite precipitation on the surface of the materials changed the nanoroughness surface. FL was the roughest in both conditions.

Significance: The Biosilicate® particles addition produced changes on the surface nanoroughness of the RMGICs. These changes depended on the particles size of the original cements in dry conditions. In water storage, dissolution of the Biosilicate® particles, a silica-rich gel formation, and a hydroxyl carbonate apatite precipitation on the surface of the materials changed the nanoroughness surface. FL was the roughest in both conditions.     

Synthesis,Structural Analysis,and Biological Evaluation of Thioxoquinazoline Derivatives as Phosphodiesterase 7 Inhibitors

PDE7 inhibitors regulate pro‐inflammatory and immune T‐cell functions, and are a potentially novel class of drugs particularly useful for treatment of a wide variety of immune and inflammatory disorders. Structural optimization of thioxoquinazoline derivatives led to new compounds with very interesting profiles as PDE7 or PDE7/PDE4 dual inhibitors, which may be further developed as new drugs for inflammatory and neurological diseases.

     

Study of the performance of Mo2C for iso-octane steam reforming

In the present work, the performance of commercial molybdenum carbide (Mo₂C) for isooctane steam reforming has been investigated in order to determine the effects of major operating parameters (temperature, space velocity, and steam to carbon ratio) on the catalytic activity. While the results obtained indicate an onset reforming temperature of 850 °C, high concentrations of H₂ in the reforming environment were found to reduce the onset temperature to 750 °C. The catalytic activity at 850 °C was sufficient to produce hydrogen yields greater than 90% and carbon conversions close to 100%, with a low selectivity to CH₄ and CO₂. In addition, and consistent with thermodynamic predictions, a steam to carbon ratio of 1 appeared to optimize the reforming rates. Finally, based on experimental observations, a reaction mechanism was formulated and used to interpret the results obtained during catalytic activity measurements. This mechanism involves continuous oxidation and reduction of Mo metal, which can provide activity and stability to the catalyst when occurring at similar rates.     

Thermal evaluation of the use of porous ceramic plates on ventilated façades—part II: Thermal behavior

The effects of porous ceramic plates on the thermal behavior of ventilated façades were evaluated, and the results are presented herein. Thermal behavior in a ventilated façade of specimens containing 40 wt% of lime mud and a firing temperature of 1100°C was evaluated and compared with a commercial porcelain ceramic tile, which was the reference material. An experimental apparatus was designed to evaluate the thermal performance of the studied ventilated façades. The results revealed that the ventilated façade composed of the studied porous ceramic tiles produced a greater reduction in temperature between the external environmental and the interior of a box representing a building (ΔT5) of 65.7°C, compared with the façade composed of the commercial porcelain ceramic tiles (ΔT5 = 56.0°C) and even the traditional façade (ΔT5 = 49.1°C). Thus, porous ceramic tiles based on byproducts are promising candidates for ventilated façade systems.     

Iron Oxide Nanoparticles Employed as Seeds for the Induction of Microcrystalline Diamond Synthesis

Iron nanoparticles were employed to induce the synthesis of diamond on molybdenum, silicon, and quartz substrates. Diamond films were grown using conventional conditions for diamond synthesis by hot filament chemical vapor deposition, except that dispersed iron oxide nanoparticles replaced the seeding. X-ray diffraction, visible, and ultraviolet Raman Spectroscopy, energy-filtered transmission electron microscopy , electron energy-loss spectroscopy, and X-ray photoelectron spectroscopy (XPS) were employed to study the carbon bonding nature of the films and to analyze the carbon clustering around the seed nanoparticles leading to diamond synthesis. The results indicate that iron oxide nanoparticles lose the O atoms, becoming thus active C traps that induce the formation of a dense region of trigonally and tetrahedrally bonded carbon around them with the ensuing precipitation of diamond-type bonds that develop into microcrystalline diamond films under chemical vapor deposition conditions. This approach to diamond induction can be combined with dip pen nanolithography for the selective deposition of diamond and diamond patterning while avoiding surface damage associated to diamond-seeding methods.     

Self-feed device behaviour evaluation designed for assessment of operability of coated electrodes

The objective of the present work is to evaluate the effectiveness of a self-feed device for coated electrodes. This device is able to eliminate disturbances from manual operation or the use of automatic control systems during the study of coated electrode behaviour. The conjugation of different methods such as short-circuit time statistical analysis and metallographic analysis (penetration, heat-affected zone, shape and mean distance between successive solidification fronts) together with the analysis of the electric arc and electrode melting parameters allows us to obtain relationships between arc behaviour, mass transfer processes and bead appearance. This permits the extraction of criteria to describe process stability and the behaviour of the feed device employed. An appropriate statistical methodology was obtained to process the ‘duration of the short-circuit’ parameter through an appropriate adjustment of empirical distributions to a log-normal model. The self-feed device for coated electrode welding allows the repeatable and reproducible execution of welding beads in the flat position, keeping the arc length based on physical and chemical characteristics of the electrode during welding trials using 125, 140 and 160 A.     

Update on the Diagnostic Pitfalls of Autopsy and Post-Mortem Genetic Testing in Cardiomyopathies

Inherited cardiomyopathies are frequent causes of sudden cardiac death (SCD), especially in young patients. Despite at the autopsy they usually have distinctive microscopic and/or macroscopic diagnostic features, their phenotypes may be mild or ambiguous, possibly leading to misdiagnoses or missed diagnoses. In this review, the main differential diagnoses of hypertrophic cardiomyopathy (e.g., athlete’s heart, idiopathic left ventricular hypertrophy), arrhythmogenic cardiomyopathy (e.g., adipositas cordis, myocarditis) and dilated cardiomyopathy (e.g., acquired forms of dilated cardiomyopathy, left ventricular noncompaction) are discussed. Moreover, the diagnostic issues in SCD victims affected by phenotype-negative hypertrophic cardiomyopathy and the relationship between myocardial bridging and hypertrophic cardiomyopathy are analyzed. Finally, the applications/limits of virtopsy and post-mortem genetic testing in this field are discussed, with particular attention to the issues related to the assessment of the significance of the genetic variants.     

Coordinating DNA Replication and Mitosis through Ubiquitin/SUMO and CDK1

Post-translational modification of the DNA replication machinery by ubiquitin and SUMO plays key roles in the faithful duplication of the genetic information. Among other functions, ubiquitination and SUMOylation serve as signals for the extraction of factors from chromatin by the AAA ATPase VCP. In addition to the regulation of DNA replication initiation and elongation, we now know that ubiquitination mediates the disassembly of the replisome after DNA replication termination, a process that is essential to preserve genomic stability. Here, we review the recent evidence showing how active DNA replication restricts replisome ubiquitination to prevent the premature disassembly of the DNA replication machinery. Ubiquitination also mediates the removal of the replisome to allow DNA repair. Further, we discuss the interplay between ubiquitin-mediated replisome disassembly and the activation of CDK1 that is required to set up the transition from the S phase to mitosis. We propose the existence of a ubiquitin–CDK1 relay, where the disassembly of terminated replisomes increases CDK1 activity that, in turn, favors the ubiquitination and disassembly of more replisomes. This model has important implications for the mechanism of action of cancer therapies that induce the untimely activation of CDK1, thereby triggering premature replisome disassembly and DNA damage.