Reordering for improving global Arnoldi–Tikhonov method in image restoration problems

This paper discusses the solution of large-scale linear discrete ill-posed problems arising from image restoration problems. Since the scale of the problem is usually very large, the computations with the blurring matrix can be very expensive. In this regard, we consider problems in which the coefficient matrix is the sum of Kronecker products of matrices to benefit the computation. Here, we present an alternative approach based on reordering of the image approximations obtained with the global Arnoldi–Tikhonov method. The ordering of the intensities is such that it makes the image approximation monotonic and thus minimizes the finite differences norm. We present theoretical properties of the method and numerical experiments on image restoration.     

Connectivity of ad hoc wireless networks: an alternative to graph-theoretic approaches

Connectivity in wireless ad hoc and sensor networks is typically analyzed using a graph-theoretic approach. In this paper, we investigate an alternative communication-theoretic approach for determining the minimum transmit power required for achieving connectivity. Our results show that, if there is significant multipath fading and/or multiple access interference in the network, then graph-theoretic approaches can substantially underestimate the minimum transmit power required for connectivity. This is due to the fact that graph-theoretic approaches do not take the route quality into consideration. Therefore, while in scenarios with line-of-sight (LOS) communications a graph-theoretic approach could be adequate for determining the minimum transmit power required for connectivity, in scenarios with strong multipath fading and/or multiple access interference a communication-theoretic approach could yield much more accurate results and, therefore, be preferable.     

Gas chromatographic-olfactometric characterization of aroma active compounds in sun-dried and vacuum-dried tarhana

The influence of drying methods on the aroma active volatiles of sun-dried tarhana (SDT) and vacuum-dried tarhana (VDT) were compared using headspace SPME, GC-O and GC-MS. Although vacuum drying reduced the total amount of volatiles as compared to SDT (total FID peak area), more aroma active material was retained with VDT (total olfactory peak area). Vacuum drying retained a greater number of aroma active components (41) whereas the sun-dried method retained only 23. Aldehydes were the largest single class of aroma compounds in both types of tarhana: 17 in VDT and 10 in SDT. Other differentiating aroma compounds include alcohols, terpenes, and phenols such as geraniol, terpinolene, and 4-vinylguaiacol among others. A total of 22 aroma active components were present in greater amounts in the VDT versus only four aroma compounds present in greater amounts in the SDT.     

Characterization of Fenugreek (<Emphasis Type="Italic">Trigonella foenum-graecum</Emphasis>) Seed Lipids

The composition and content of lipids, fatty acids, triacylglycerols, tocopherols and sterols in nine fenugreek genotypes were analyzed. Lipid content in fenugreek seeds ranged from 5.8 to 15.2%. Major fatty acids were: linoleic acid (45.1–47.5%), α-linolenic (18.3–22.8%), oleic (12.4–17.0%), palmitic (9.8–11.2%) and stearic (3.8–4.2%) acids. The ratios of n-6 to n-3 fatty acids were between 2.1 and 2.7. Similar fatty acid distribution was observed in all analyzed samples with some deviations. α-Tocopherol was the predominant component found in the fenugreek lipid antioxidants, and it constituted over 84% of the total amounts of tocopherols. It amounts ranged from 620 to 910 mg/kg lipids. β-Sitosterol was the major sterol in all samples, varying from 14,203 to 18,833 mg/kg of lipids. Campesterol and cycloartenol were other major sterols, and these compounds including β-sitosterol constituted 56–72% of all sterols. Fenugreek seed lipids consisted predominantly triunsaturated (56.9–66.5%) and diunsaturated (32.2–41.6%) triacylglycerides. Among these components trilinolein (LLL; 12.9–20.5%) dominated followed by PLL (14.0–20.4%), LnLnO (7.8–17.7%), PLO (5.7–11.6%), OLL (6.9–10.6%), LLLn (3.2–9.6%), and LnLnL (3.5–7.6%). Results of the study show that fenugreek seed lipids may be a source of a nutraceutical ingredient for food applications.     

Usage of bioactivated PCL nanofiber as a fluoxetine capturing matrix in milk

ABSTRACT

In this study, for the first time, polycaprolactone (PCL) nanofiber matrix was bioactivated for the removal of fluoxetine from milk. Bioactivated nanofiber was prepared by immobilizing fluoxetine antibody on PCL nanofiber matrix. The fluoxetine removal efficiency of bioactivated nanofiber in milk was found to be approximately 93.6%. This removal did not significantly change the biochemical composition of milk. In conclusion, as a novel product, bioactivated nanofibrous PCL matrix can be used for the removal of drugs or unwanted chemicals from breast milk or from other fluids.     

Ethanol-Modified Supercritical Carbon Dioxide Extraction of the Bioactive Lipid Components of <Emphasis Type="Italic">Camelina sativa</Emphasis> Seed

Camelina sativa seed is an underutilized oil source that attracts a growing interest, but it requires more research on its composition and processing. Its high omega‐3 content and growing demand for clean food processing technologies make conventional oil extraction less attractive. In this study, the effect of extraction methods on the bioactive lipid composition of the camelina seed lipid was investigated, and its bioactive lipid composition was modified at the extraction stage using ethanol‐modified supercritical carbon dioxide (SC‐CO₂). Ethanol‐modified SC‐CO₂ extractions were carried out at varying temperatures (50 and 70 °C), pressures (35 and 45 MPa), and ethanol concentrations (0–10%, w/w), and were compared to SC‐CO₂, cold press, and hexane extraction. The highest total lipid yield (37.6%) was at 45 MPa/70 °C/10% (w/w) ethanol. Phospholipids and phenolic content increased significantly with ethanol‐modified SC‐CO₂ (p < 0.05). SC‐CO₂ with 10% (w/w) ethanol concentration selectively increased phosphatidylcholine (PC) content. Apparent solubility of camelina seed lipids in SC‐CO₂, determined using the Chrastil model, ranged from 0.0065 kg oil/kg CO₂ (35 MPa/50 °C) to 0.0133 kg oil/kg CO₂ (45 MPa/70 °C). Ethanol‐modified SC‐CO₂ extraction allowed modification of the lipid composition that was not possible with the conventional extraction methods. This is a promising green method for extraction and fractionation of camelina seed lipids to separate and enrich its bioactives.     

rGO/CuO/PEDOT nanocomposite formation,its characterisation and electrochemical performances for supercapacitors

ABSTRACT

Supercapacitor properties of rGO, CuO, PEDOT and rGO/CuO at [rGO]_o/[CuO]_o?=?1:1; 1:1.5; 1:2 and rGO/CuO/PEDOT nanocomposite at [rGO]_o/[CuO]_o/[EDOT]_o?=?1:1:1; 1:1:3; 1:1:5 were investigated using chemical reduction of GO and in-situ polymerisation process. SEM-EDX, HRTEM, BET surface area analysis confirm the nanocomposite formations. Nanocomposite materials are also analysed through FTIR-ATR, Raman, TGA-DTA, GCD, CV and EIS. The highest specific capacitance of C _sp?=?156.7 F/g at 2?mV/s is determined as rGO/CuO/PEDOT at [rGO]_o/[CuO]_o/[EDOT]_o?=?1:1:5. In addition, two-electrode supercapacitor device for rGO/CuO/PEDOT at [rGO]_o/[CuO]_o/[EDOT]_o?=?1:1:5 are found to provide a maximum specific energy (E?=?14.15 Wh/kg at 20?mA) and specific power (P?=?24730 W/kg at 50?mA), electrical serial resistance (ESR?=?13.33 Ω) with good capacity retention after 3000 cycles. An equivalent circuit model of LR1(CR2)(QR3) is proposed to interpret the EIS data. The supercapacitor performance of the rGO/CuO/PEDOT nanocomposite electrode indicates the synergistic effect of hybrid supercapacitors.     

Organic solvent absorbents based on linear diol

Cross‐linked poly(orthocarbonate)s were prepared by condensation of the tetraethyl orthocarbonate with different length of aliphatic diols. The synthesized polymers have been characterized by Fourier‐transform infrared spectroscopy, solid‐state ¹³C cross‐polarization magic angle spinning (CPMAS) nuclear magnetic resonance, thermal gravimetric analysis, and elemental analysis. The cross‐linked polymers were evaluated for organic solvent absorbency application. The effect of diol type on swelling properties of cross‐linked polymers was studied through the solvent absorption tests. The swelling parameters such as maximum solvent absorbency, saturation time, and retention of the solvent were evaluated for the synthesized sorbents. All of the cross‐linked polymers had moderate thermal stability and good regenerable solvent uptake abilities. POLYM. ENG. SCI., 53:2102–2108, 2013. © 2013 Society of Plastics Engineers     

Casting properties of ASTM A128 Gr. E1 steel modified with Mn-alloying and titanium ladle treatment

This work aims to produce a high manganese steel with more refined austenite grains and better wear resistance without sacrificing the toughness and tensile properties by Mn alloying and Ti ladle treatment in comparision to ASTM A128 Gr. E1 steel (1.0C-13Mn) that is mostly used in the mining industry. The 1.0C-17Mn-xTi alloys (x=0, 0.05 and 0.1, in wt.%) were prepared. A relationship was established between the microstructures and mechanical properties of the as-cast and solution annealed alloys. Increasing Ti content increases the stable Ti(CN) phase on and beside the grain boundaries and decreases up to 37% the austenite grain size of the as-cast alloy with 0.10wt.% Ti. Correspondingly, after solution annealed, optimized titanium content (0.05wt.%) results in significant improvements in wear resistance, hardness, elongation, yield and tensile strengths by 44%, 31%, 30%, 8% and 12%, respectively, except 9% decrease in impact toughness compared to ASTM A 128 Gr. E1 steel without modification. These results show that 1.0C-17Mn-0.05Ti alloy can be used for parts exposed to high load wear and applied in conditions where relatively high tensile properties with sufficent ductility is needed.

     

On linear logic planning and concurrency

We present an approach to linear logic planning where an explicit correspondence between partial order plans and multiplicative exponential linear logic proofs is established. This is performed by extracting partial order plans from sound and complete encodings of planning problems in multiplicative exponential linear logic. These partial order plans exhibit a non-interleaving behavioural concurrency semantics, i.e., labelled event structures. Relying on this fact, we argue that this work is a crucial step for establishing a common language for concurrency and planning that will allow to carry techniques and methods between these two fields.