Predictions of nitrate diffusion in sediment using horizontal attenuated total reflection (HATR) by Fourier transform infrared (FTIR) spectrometry

Using a novel and simple method based on horizontal attenuated total reflection (HATR) by Fourier transform infrared (FTIR) spectrometry, the effective diffusion coefficient, De, of nitrate in a contaminated anthropogenic sediment was estimated as 7.34 x 10(-6)cm2 s(-1). This method, which requires as little as 1 mL of sediment sample, was able to measure the De of a chemical species with a reproducibility of +/-3% in about 5h. Based on this De and a pre-determined nitrate reduction rate, the profiles of nitrate concentration in two sediment columns were satisfactorily predicted from a mathematical model. Results showed that the profile in this aged sediment depended mainly on the diffusion of nitrate and, only to a much lesser degree, the rate of nitrate reduction. Measurements in 55 anthropogenic sediment samples collected from five locations and various depths of a contaminated site further showed that the De of nitrate increased linearly with the water content of the sediment, but decreased with the sediment density. The technique demonstrated in this study shall be applicable for the risk assessment of toxic pollutants in contaminated sediments, and for planning the spatial and time intervals of nitrate injection strategy in bioremediation.     

A new mathematical model to evaluate simazine removal in three different immobilized-biomass reactors

A new mathematical model based on the cinetical Langmuir equation is developed to interpret and predict the effectiveness of simazine (SZ) removal in immobilized-biomass reactor (IBR), to consider herbicide-support affinity (Cx), and herbicide-cell affinity (Cy). Three solid supports: sepiolite monolith, granular sepiolite, and alginate were used in pilot-scale reactors that were inoculated with Klebsiella planticola DSZ. The abiotic process was analysed by measuring the SZ sorption capacity of the reactor supports. Sepiolite monolith showed the maximum value for herbicide-support affinity (28.02+/-0.9%). The effectiveness of the biotic process was estimated considering the formation of biomass and SZ biodegradation. Granular sepiolite showed either higher affinity with SZ and viability rate (0.90) throughout the process, and SZ removal rate was 3.39+/-0.06 mg/h. The mathematical model presented in this paper provides useful insights into the interpretation of experimental data as well as prediction for the implementation of biological reactors.     

Metal concentrations in a shallow groundwater aquifer underneath petrochemical complex

Duplicate groundwater samples were collected from 104 monitoring wells (piezometers) from shallow aquifers underneath an industrial city in the Eastern Province of Saudi Arabia. Concentrations of Al, As, Cd, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Ti, V, Zn, Ca, Mg, K, Na, Cl, SO₄, alkalinity, salinity, total dissolved salts, and pH were determined in these samples. Analysis of variance showed significantly (p < 0.05) wide variations in the concentrations of the above parameters. The contour maps of metal concentrations indicated that these variations were related to important landmarks in the study area. The results of correlation analyses suggest that geographical as well as chemical factors may influence metal distribution in the groundwater samples. To investigate the geographical effects, the analytical data were normalized (element/Cl ratios were calculated) for chemical variability. As expected, contour mapping of the ratio data of element/Cl of Na, Ca, Mg, K, SO₄, alkalinity, salinity, total dissolved salts, and Sr vary in a relatively small range and did not show a particular geographical trend. The groundwater sample from the industrial-dust area contained higher ratios between concentrations of Cl and Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb, and Zn. These observations clearly suggest an extraneous contamination source, probably industrial dust, in the area. Another geographical area where metal (As, Cd, Cu, Mo, Ni, Ti,and V)/Cl ratios were found to be large was in the vicinity of an oil-refinery. Groundwater samples collected from the vicinity of a fertilizer plant and green-belt area contained relatively higher ratios of Al, Cd, Cr, Co, and Ni. The results of this study suggest that leachate from the industrial dust, leakage from the oil refinery and fertilizer plant, and drainage of irrigation water are some of the important pollution sources in the industrial city.     

The long-term evolutions and the regional characteristics of atmospheric methane concentrations in Nagoya, 1983-1997

This study provides information on the long-term evolutions of the atmospheric methane (CH4) concentrations in Nagoya City, Japan, which were analyzed by using the continuous monitoring data observed at the eight observatory stations for 1983-1997. The 15-year records of the atmospheric CH4 concentrations were examined by means of a time-series analysis using a fast Fourier transform with a low-pass filter to elucidate the seasonal cycles and the long-term trends. The annual averages of the CH4 concentrations in Nagoya were 1.85 ppmv (parts per million by volume), 1.91 ppmv, and 1.90 ppmv in 1988, 1995 and 1997, respectively. Moreover, the annual average growth rate showed a drastic decrease from 17 ppbv (parts per billion by volume) year(-1) in 1992 to 2 ppbv year(-1) in 1993, and further down to 7 ppbv year(-1) in 1997. Comparison of the atmospheric CH4 records in Nagoya with those in global air of the northern hemisphere observed at Mauna Loa observatory in Hawaii, USA, allows us to estimate the excess concentration of CH4 in the urban atmosphere of Nagoya, which was 0.17 ppmv in 1988 and 0.15 ppmv in 1997. On a local scale, the atmospheric CH4 concentrations in the northern part of Nagoya City increased until 1992 and then gradually decreased from 1993 to 1997, although those in the south-western urban areas constantly increased at the averaged growth rate of 13 ppbv year(-1) for 1988-1997. The variation of the long-term trends of the CH4 concentrations in Nagoya may be ascribed to the emission changes from the CH4 sources due to the human activities such as waste dumping and landfills.     

Contamination of soils and plants by mercury as influenced by the proximity to industries in Alexandria,Egypt

The amounts of total Hg in the soils and the edible parts of seven vegetable plant crops grown in unpolluted and polluted soils were studied.The highly polluted soils contained higher levels of Hg (495 ppb) than those in the unpolluted (35 ppb). The topsoil was highly enriched with Hg than the subsoil as the result of the deposition of Hg particulates produced from the industries.Plants grown in soils near industries contained high levels of Hg up to 362 ppb. The amounts of Hg in the plant species which grown in winter were higher than those grown in summer.     

Effect of surfactants on the determination of aluminium in waters

Eleven surfactants representing pure cationic, anionic and nonionic detergents, four commercial detergents, sodium pyrophosphate, sodium tripolyphosphate, a soap and nitrilotriacetic acid (NTA) were investigated for their effect on the determination of aluminium in water using the eriochrome cyanine R, ferron-orthophenanthroline and chrome azurol S methods. Cationic, anionic and nonionic detergents at concentrations up to 2, 100 and 1000 mg l⁻¹, respectively, did not interfere. Sodium tripolyphosphate interfered badly above 1.0 mg l⁻¹, and therefore the interference by formulated detergents containing tripolyphosphate was serious. Concentrations of NTA, soap and sodium pyrophosphate had to be below 0.5, 10 and 20 mg l⁻¹, respectively, to limit the error to 5%.     

Formation of alkylated aromatic acids in groundwater by anaerobic degradation of alkylbenzenes

Evidence for the presence of previously unreported alkylated aromatic acids in anaerobic groundwater samples from a jet fuel-contaminated site is presented. The redox conditions are dominated by sulfate reduction. A gas chromatography/mass spectrometry screening showed a composition of aromatic hydrocarbons ranging from BTEX (C(0)-C(2)-substituted benzenes) up to C(7)-benzenes. Known metabolites like methylbenzoates (C(1)-BA), C(2)-BA, C(3)-BA as well as methylbenzylsuccinates (C(1)-BSA) were detected. Additionally, previously unreported metabolites of higher alkylated benzenes have been identified in the extracts: those are C(2)-BSA to C(5)-BSA as well as C(4)-BA to C(6)-BA, which were detected in the microg/l-concentration range. The formation of C(1)- and C(2)-BSA as well as the C(1)- and C(2)-BA can be linked to structurally corresponding parent contaminants like the xylene isomers and the trimethylbenzene isomers. The C(3)-BSA and C(3)-BA represent metabolites of C(4)-benzenes. The occurrence of C(4)-C(5)-BSA and C(4)-C(6)-BA is attributed to C(5)-C(7)-benzenes acting as parent compounds. The concentration of total aromatic contaminants decreased along the plume centre line. In contrast, benzoates and benzylsuccinates (BA and BSA) showed constant concentrations over a distance of 84 m. BA concentrations were up to 162 times higher compared to BSA, as indicated by the ratio f(BA/BSA). A pronounced transient behaviour of BSA or an overall persistent behaviour of BA can explain this. Hence, along the plume centre line, f(BA/BSA) was constant over a distance of 128 m. The degradation products detected in a monitoring well are not necessarily tied to contaminants detected in that well. Therefore, the metabolite plume is partly located in front of the contaminant plume, but does not significantly migrate downstream the plume toe.     

The effect of depositional history on contaminated bed sediment stability

Experiments were conducted in an annular flume using a commercially available kaolinite clay as well as contaminated bed sediment from Hamilton Harbour (Ontario) to assess their stability against erosion. Critical shear stress for erosion was measured under different conditions of bed formation (quiescently deposited beds and shear deposited beds) as well as with and without the presence of a biostabilized bed. Results suggest that a biostabilized bed and a bed formed under a flowing condition, similar to a river scenario, will be more resistant against erosion than will a non-biostabilized bed and a bed formed under quiescent conditions. Up to three cycles of erosion and flocculation/deposition were observed to occur within one experiment. These results suggest that the depositional history and biostabilization of river bed sediments need to be seriously considered within sediment and contaminant transport models if meaningful estimates of sediment and contaminant source, fate and effect are to be generated and used for the management of our aquatic ecosystems.     

Gas chromatographic determination of aliphatic amines and quantitative analysis of small amounts of dimethylamine in wastewater

A gas chromatographic procedure has been developed for the determination of small amounts of aliphatic amines in wastewater. Pennwalt 223 was employed as a liquid phase which is selective to amines. Kováts' retention indices are presented for C₁---C₄ mono-, di-, and trialkylamines. Response factors for dialkylamines using the FID detector are given. The linearity of the FID detector over the concentration range 10–4000 mg 1⁻¹ for dimethylamine was also established.     

Radon and 'King Solomon's Miners': Faynan Orefield, Jordanian Desert

Concentrations of 222Rn were measured in ancient copper mines which exploited the Faynan Orefield in the South-Western Jordanian Desert. The concentrations of radon gas detected indicate that the ancient metal workers would have been exposed to a significant health risk and indicate that any future attempt to exploit the copper ores must deal with the hazard identified. Seasonal variations in radon concentrations are noted and these are linked to the ventilation of the mines. These modern data are used to explore the differential exposure to radon and the health of ancient mining communities.