Diagnostics of Multioperation Processes Using Basic Cells of Digital Homogeneous Structures

Russian Electrical Engineering - The cells of homogeneous digital structures designed for multioperation process diagnostics are considered in the form of graphic models. Digital circuits and...     

The impact of natural and artificial weathering on the visual,colour and structural changes of seven tropical woods

This study investigates the effects of wood weathering on changes in its macroscopic and colour characteristics in connection with changes in its molecular and anatomical structure. Seven hardwoods suitable for outdoor architecture—bangkirai, cumaru, cumaru rosa, ipé, jatobá, kusia, and massaranduba—were exposed to the exterior out of ground contact for 1–36 months according to EN 927-3, and for 1–12 weeks in Xenotest with water spraying according to partly modified EN 927-6. With prolonged weathering, the following changes occurred in the top surfaces of all tropical woods: (1) visual—creation of longitudinal macro-cracks, (2) spectrophotometry and CIE-L ^? a ^? b ^? —darkening in exterior exposure mainly due to pollutants, except for ipé, and vice versa lightening in Xenotest, as well as greening and blueing in both modes of exposure, (3) FTIR—faster decrease of guaiacyl than syringyl lignin, absolute decrease of conjugated and unconjugated carbonyl groups in the newly formed lignin-polysaccharide-extractive substrate in the photo-oxidized and washed-out cell walls, and decrease of cellulose crystallinity, (4) SEM—damaging of cell-walls by micro-cracks, and their degradation by thinning. Connections between changes of the individual characteristics of weathered woods, for example, between the colour (ΔE*, etc.) and the molecular structure (carbonyls, etc.), were also determined.     

Operational management of trunk main discolouration risk

Despite significant on-going investment, water companies continue to receive an unacceptable number of discolouration related customer contacts. In this paper, data from intensive distribution system turbidity monitoring and cluster analysis of discolouration customer contacts indicate that a significant proportion of these contacts are due to material mobilising from the trunk main system, and operational flow increases are shown to have a higher discolouration risk than burst incidents. A trunk main discolouration incident highlighting this risk is discussed, demonstrating the need for pro-active trunk main risk assessments. To identify the source of the material event flow rates were modelled using the PODDS (prediction of discolouration in distribution systems) discolouration model. Best practice pro-active management is demonstrated in a case study where the PODDS model is used to implement managed incremental flow changes on a main with known discolouration risk with no discolouration impact to customers and significant cost savings.     

Simulation of one-sided heating of boiler unit membrane-type water walls

This study describes the results of simulation of the temperature field and the stress-strain state of membrane-type gastight water walls of boiler units using the finite element method. The methods of analytical and standard calculation of one-sided heating of fin-tube water walls by a radiative heat flux are analyzed. The methods and software for input data calculation in the finite-element simulation, including thermoelastic moments in welded panels that result from their one-sided heating, are proposed. The method and software modules are used for water wall simulation using ANSYS. The results of simulation of the temperature field, stress field, deformations and displacement of the membrane-type panel for the boiler furnace water wall using the finite-element method, as well as the results of calculation of the panel tube temperature, stresses and deformations using the known methods, are presented. The comparison of the known experimental results on heating and bending by given moments of membrane-type water walls and numerical simulations is performed. It is demonstrated that numerical results agree with high accuracy with the experimental data. The relative temperature difference does not exceed 1%. The relative difference of the experimental fin mutual turning angle caused by one-sided heating by radiative heat flux and the results obtained in the finite element simulation does not exceed 8.5% for nondisplaced fins and 7% for fins with displacement. The same difference for the theoretical results and the simulation using the finite-element method does not exceed 3% and 7.1%, respectively. The proposed method and software modules for simulation of the temperature field and stress-strain state of the water walls are verified and the feasibility of their application in practical design is proven.     

Test facility for investigation of heat transfer of promising coolants for the nuclear power industry

The results are presented of experimental investigations into liquid metal heat transfer performed by the joint research group consisting of specialist in heat transfer and hydrodynamics from NIU MPEI and JIHT RAS. The program of experiments has been prepared considering the concept of development of the nuclear power industry in Russia. This concept calls for, in addition to extensive application of water-cooled, water-moderated (VVER-type) power reactors and BN-type sodium cooled fast reactors, development of the new generation of BREST-type reactors, fusion power reactors, and thermonuclear neutron sources. The basic coolants for these nuclear power installations will be heavy liquid metals, such as lead and lithium-lead alloy. The team of specialists from NRU MPEI and JIHT RAS commissioned a new RK-3 mercury MHD-test facility. The major components of this test facility are a unique electrical magnet constructed at Budker Nuclear Physics Institute and a pressurized liquid metal circuit. The test facility is designed for investigating upward and downward liquid metal flows in channels of various cross-sections in a transverse magnetic field. A probe procedure will be used for experimental investigation into heat transfer and hydrodynamics as well as for measuring temperature, velocity, and flow parameter fluctuations. It is generally adopted that liquid metals are the best coolants for the Tokamak reactors. However, alternative coolants should be sought for. As an alternative to liquid metal coolants, molten salts, such as fluorides of lithium and beryllium (so-called FLiBes) or fluorides of alkali metals (so-called FLiNaK) doped with uranium fluoride, can be used. That is why the team of specialists from NRU MPEI and JIHT RAS, in parallel with development of a mercury MHD test facility, is designing a test facility for simulating molten salt heat transfer and hydrodynamics. Since development of this test facility requires numerical predictions and verification of numerical codes, all examined configurations of the MHD flow are also investigated numerically.     

ESMRMB 2017, 34th Annual Scientific Meeting,Barcelona, ES,October 19–October 21: Abstracts,Thursday

Objective

Current magnetic resonance imaging (MRI) axon diameter measurements rely on the pulsed gradient spin-echo sequence, which is unable to provide diffusion times short enough to measure small axon diameters. This study combines the AxCaliber axon diameter fitting method with data generated from Monte Carlo simulations of oscillating gradient spin-echo sequences (OGSE) to infer micron-sized axon diameters, in order to determine the feasibility of using MRI to infer smaller axon diameters in brain tissue.

Materials and methods

Monte Carlo computer simulation data were synthesized from tissue geometries of cylinders of different diameters using a range of gradient frequencies in the cosine OGSE sequence . Data were fitted to the AxCaliber method modified to allow the new pulse sequence. Intra- and extra-axonal water were studied separately and together.

Results

The simulations revealed the extra-axonal model to be problematic. Rather than change the model, we found that restricting the range of gradient frequencies such that the measured apparent diffusion coefficient was constant over that range resulted in more accurate fitted diameters. Thus a careful selection of frequency ranges is needed for the AxCaliber method to correctly model extra-axonal water, or adaptations to the method are needed. This restriction helped reduce the necessary gradient strengths for measurements that could be performed with parameters feasible for a Bruker BG6 gradient set. For these experiments, the simulations inferred diameters as small as 0.5 μm on square-packed and randomly packed cylinders. The accuracy of the inferred diameters was found to be dependent on the signal-to-noise ratio (SNR), with smaller diameters more affected by noise, although all diameter distributions were distinguishable from one another for all SNRs tested.

Conclusion

The results of this study indicate the feasibility of using MRI with OGSE on preclinical scanners to infer small axon diameters.

     

Energy-efficient algorithms for assessment of the rail-circuit operation

The voltage in a rail circuit is determined for reliable detection of the mobile unit or a train on the section of the railway track. It is proposed to use the structures of the automatic block system based on the time-division channels of status scanning of the rail circuits with subsequent signal processing by two parameters. The first parameter includes the assessment of correspondence of the code signals transmitted to the rail circuit and received from the rail circuit. The second parameter is obtained based on the analysis of the voltage at the rail-circuit output within the current and previous measurements considering the voltagechange rate. This latter parameter makes it possible to distinguish reliably the state when the rail track is occupied by the train from the random changes of the rail-circuit parameters from the influence of the external factors. The proposed algorithms permit one to reduce significantly consumption of electric energy providing operation of rail circuits.     

Peat swamps at Giral lignite field of Barmer basin,Rajasthan, Western India: understanding the evolution through petrological modelling

International Journal of Coal Science & Technology - The lignite samples collected from Giral lignite field of Barmer basin have been subjected to petrological investigation. The data generated...     

Distribution of mineral species in different coal seams of Talcher coalfield and its transformation behavior at varying temperatures

International Journal of Coal Science & Technology - Mineral phase characterization and thorough understanding of its transformation behavior during combustion are imperative to know the...     

Correlations Among Signatures for Detection of Different Types of Fires

One way of overcoming the problem of false alarms encountered in a single parameter detection system due to non-fire stimulii is the simultaneous use of multiple signatures. Researchers have found significant benefits of multi-sensor detection in reducing false triggering. Appreciable interest has been expressed in using carbon monoxide (CO) or carbon dioxide (CO₂) gas sensors in combination with smoke sensors. The present study has been carried out to determine the correlation and inter-dependence between two different fire signatures like CO–OD (optical density), CO–CO₂, CO₂–OD. The signatures have been investigated using experimental measurements of a fire inside a closed compartment measuring 7 x 7 x 4.2 m. A range of fuels are used, and both smouldering and flaming combustion are examined. Attempts have been made to examine whether correlation coefficients between two signatures can form a basis of detection and be exploited as one of the components in multi- criteria fire detection algorithm. The CO/CO₂ ratio as a criterion for detector operation has also been examined and discussed in the light of existing literature and codal provisions.